Mu Season 6 Offline - success!!!

[tonlion]

Thank you

 

[DragonSeth]

hi dragonseth! I need help pls, im a bit confused on what ip to use? please check my print screen,

1. i put my ipv4 in host = 192.168.1.5 dbz.sytes.net

2. should i put my ipv4 also in replacement for Sdbz.sytes.net?

3. also in hexing main exe should i put ipv4?

4. When configuring config in mu maker folder what information should i need change?

5. and lastly why am i seeing this network related or instace specific error? i already enable port 1433 in client network utility, by the way im using sql 2000 upgraded to sql 2000 sp4
on windows 7 32bit

I hope you can help me out with this, thank you and gonna wait for your response,

Sorry been really in active on this forum life problems....

SQL LOCATIONS|
\MuServer\TitanLinkServer\Config.ini
\MuServer\SCFExDB\Config.ini



IP LOCATIONS\
\MuServer\TitanCS\Data\SCF_ServerList.cfg-Global IP
\MuServer\Data\commonserver.cfg-ipv4 address
\MuServer\Data\commonserverCS.cfg-ipv4 address
\MuServer\Data\IpList.dat-Global IP
\MuServer\Data\MapServerInfo.dat-Global IP
\MuServer\Data\lang\kor\commonloc.cfg-Global IP

*Warning*
When you go to hex edit the ip in the main.exe your ip can only be 10 characters long so if you have more then characters i recommend you use NO-IP to make it 10 characters

Main.exe you can either use Global IP Or NO-IP if you use you ipv4 address it make it local host

 

[KarLi]

Brother you are not allowed to put IPv4 in commonserver files only 127.0.0.1 and no other needed.

 

[Royal Alviss]

someone teamview me plz i can't work it out !!! i follow the tutorial but it's seem not working ! i will be very appreciated !!! my FB is : Alviss Skyslat

 

[boobie893]

How did you guys download this? without mediafire asking you to upgrade or something?

 

[boobie893]

Can anyone help me? its sayimg log-in server failed. i used my Default gateway ip address/

 

[yoshio0]

Please can you send me in my YM yoshio_011@yahoo.com . . . . i need it please

 

[MuRad]

Thank you for the release!

But I have a problem with Devil Squares. There are no monsters in them when event starts.
The log is the following:

0:11:20  ================== MU 2003 EVENT SERVER START ==================
0:11:20  SQLSTATE:IM002, БшґЬБ¤єё:[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified

0:11:20  QNO : 0, TID : 0, DB ODBC CONNECT [FAIL]
0:11:20  SQLSTATE:IM002, БшґЬБ¤єё:[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified

0:11:20  QNO : 0, TID : 1, DB ODBC CONNECT [FAIL]
0:11:20  SQLSTATE:IM002, БшґЬБ¤єё:[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified

0:11:20  QNO : 0, TID : 2, DB ODBC CONNECT [FAIL]
0:11:20  SQLSTATE:IM002, БшґЬБ¤єё:[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified

0:11:20  QNO : 0, TID : 3, DB ODBC CONNECT [FAIL]
0:11:20  SQLSTATE:IM002, БшґЬБ¤єё:[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified

0:11:20  QNO : 1, TID : 0, DB ODBC CONNECT [FAIL]
0:11:20  SQLSTATE:IM002, БшґЬБ¤єё:[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified

0:11:20  QNO : 1, TID : 1, DB ODBC CONNECT [FAIL]
0:11:20  SQLSTATE:IM002, БшґЬБ¤єё:[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified

0:11:20  QNO : 1, TID : 2, DB ODBC CONNECT [FAIL]
0:11:20  SQLSTATE:IM002, БшґЬБ¤єё:[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified

0:11:20  QNO : 1, TID : 3, DB ODBC CONNECT [FAIL]
0:11:21  SQLSTATE:IM002, БшґЬБ¤єё:[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified

0:11:21  QNO : 2, TID : 0, DB ODBC CONNECT [FAIL]
0:11:21  SQLSTATE:IM002, БшґЬБ¤єё:[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified

0:11:21  QNO : 2, TID : 1, DB ODBC CONNECT [FAIL]
0:11:21  SQLSTATE:IM002, БшґЬБ¤єё:[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified

0:11:21  QNO : 2, TID : 2, DB ODBC CONNECT [FAIL]
0:11:21  SQLSTATE:IM002, БшґЬБ¤єё:[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified

0:11:21  QNO : 2, TID : 3, DB ODBC CONNECT [FAIL]
0:11:21  SQLSTATE:IM002, БшґЬБ¤єё:[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified

0:11:21  QNO : 3, TID : 0, DB ODBC CONNECT [FAIL]
0:11:21  SQLSTATE:IM002, БшґЬБ¤єё:[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified

0:11:21  QNO : 3, TID : 1, DB ODBC CONNECT [FAIL]
0:11:21  SQLSTATE:IM002, БшґЬБ¤єё:[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified

0:11:21  QNO : 3, TID : 2, DB ODBC CONNECT [FAIL]
0:11:21  SQLSTATE:IM002, БшґЬБ¤єё:[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified

0:11:21  QNO : 3, TID : 3, DB ODBC CONNECT [FAIL]

Can someone suggest something?

 

[KarLi]

Thank you for the release!

But I have a problem with Devil Squares. There are no monsters in them when event starts.
The log is the following:

0:11:20  ================== MU 2003 EVENT SERVER START ==================
0:11:20  SQLSTATE:IM002, БшґЬБ¤єё:[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified

0:11:20  QNO : 0, TID : 0, DB ODBC CONNECT [FAIL]
0:11:20  SQLSTATE:IM002, БшґЬБ¤єё:[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified

0:11:20  QNO : 0, TID : 1, DB ODBC CONNECT [FAIL]
0:11:20  SQLSTATE:IM002, БшґЬБ¤єё:[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified

0:11:20  QNO : 0, TID : 2, DB ODBC CONNECT [FAIL]
0:11:20  SQLSTATE:IM002, БшґЬБ¤єё:[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified

0:11:20  QNO : 0, TID : 3, DB ODBC CONNECT [FAIL]
0:11:20  SQLSTATE:IM002, БшґЬБ¤єё:[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified

0:11:20  QNO : 1, TID : 0, DB ODBC CONNECT [FAIL]
0:11:20  SQLSTATE:IM002, БшґЬБ¤єё:[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified

0:11:20  QNO : 1, TID : 1, DB ODBC CONNECT [FAIL]
0:11:20  SQLSTATE:IM002, БшґЬБ¤єё:[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified

0:11:20  QNO : 1, TID : 2, DB ODBC CONNECT [FAIL]
0:11:20  SQLSTATE:IM002, БшґЬБ¤єё:[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified

0:11:20  QNO : 1, TID : 3, DB ODBC CONNECT [FAIL]
0:11:21  SQLSTATE:IM002, БшґЬБ¤єё:[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified

0:11:21  QNO : 2, TID : 0, DB ODBC CONNECT [FAIL]
0:11:21  SQLSTATE:IM002, БшґЬБ¤єё:[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified

0:11:21  QNO : 2, TID : 1, DB ODBC CONNECT [FAIL]
0:11:21  SQLSTATE:IM002, БшґЬБ¤єё:[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified

0:11:21  QNO : 2, TID : 2, DB ODBC CONNECT [FAIL]
0:11:21  SQLSTATE:IM002, БшґЬБ¤єё:[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified

0:11:21  QNO : 2, TID : 3, DB ODBC CONNECT [FAIL]
0:11:21  SQLSTATE:IM002, БшґЬБ¤єё:[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified

0:11:21  QNO : 3, TID : 0, DB ODBC CONNECT [FAIL]
0:11:21  SQLSTATE:IM002, БшґЬБ¤єё:[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified

0:11:21  QNO : 3, TID : 1, DB ODBC CONNECT [FAIL]
0:11:21  SQLSTATE:IM002, БшґЬБ¤єё:[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified

0:11:21  QNO : 3, TID : 2, DB ODBC CONNECT [FAIL]
0:11:21  SQLSTATE:IM002, БшґЬБ¤єё:[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified

0:11:21  QNO : 3, TID : 3, DB ODBC CONNECT [FAIL]

Can someone suggest something?

I normally ignore it but.. in even folder>config file open it
and change DNS to Event or MU2003_EVENT_DATA or whatever name your restored your event database.

or oyu can open data sources and re-add it to MuOnline etc.

 

[jade0225]

I just read this thread, will anyone tell me if i need to download a new client for MU, or i could use my online client? (like the ones i downloaded at muonline.ph? can this client be played offline if someone reads my post. Will you kindly email me your opinion.... and please teach me ^_^ thanks in andvance... my email (rayboqmartinez84@gmail.com)

 

[BlG G]

I just read this thread, will anyone tell me if i need to download a new client for MU, or i could use my online client? (like the ones i downloaded at muonline.ph? can this client be played offline if someone reads my post. Will you kindly email me your opinion.... and please teach me ^_^ thanks in andvance... my email (rayboqmartinez84@gmail.com)

Theres really some good guides bro, just look around.

 

[KarLi]

@jade0225

Ofcourse you can use other client, as soon as you use other main.exe and the correct files then ur alright, if u wanna use the exact main by other server its kind of Impossible or lets say not even worth to work hard to unpack it etc, just use what u find in this forum instead.

 

[Rippuh]

Hi everyone, ive found this guide some days ago and I'm trying to set up a server following the guide step by step, with all the tools provided here but on point 3 step 4 (Run the sql scripts inside \SQL folder) I got eror messages on SQL Querry Analyzer. With the text on "Rage fighter inventory fix.sql" I got the error

Server: Msg 208, Level 16, State 4, Procedure kris, Line 1
Invalid object name 'dbo.Character'.

and with the text on "Create_Summoner_Fix" I got

Server: Msg 170, Level 15, State 1, Line 1
Line 1: Incorrect syntax near 'name'.
Server: Msg 102, Level 15, State 1, Line 3
Incorrect syntax near 'Enterprise'.
Server: Msg 170, Level 15, State 1, Line 6
Line 6: Incorrect syntax near 'has'.
Server: Msg 102, Level 15, State 1, Line 7
Incorrect syntax near 'Query'.
Server: Msg 170, Level 15, State 1, Line 12
Line 12: Incorrect syntax near 'f'.



and I would like to know, is this normal? and if this is normal, i would like to know what to do after inputting the text on SQL Querry Analyzer? the guide just says to input the text, "Query->Execute" then input the another text "Query->Execute" again but no additional steps are specified. This is my first time at something like this, I would appreciate any help someone can provide.

 

[TyreXo]

And I did like in the guides, I'm using sql 2008 r2 enterprise.



In the query you have to put only this lines

UPDATE AccountCharacter
SET Summoner = 1
WHERE (Summoner >= 0)

And then Parse

Hi everyone, ive found this guide some days ago and I'm trying to set up a server following the guide step by step, with all the tools provided here but on point 3 step 4 (Run the sql scripts inside \SQL folder) I got eror messages on SQL Querry Analyzer. With the text on "Rage fighter inventory fix.sql" I got the error

Server: Msg 208, Level 16, State 4, Procedure kris, Line 1
Invalid object name 'dbo.Character'.

and with the text on "Create_Summoner_Fix" I got

Server: Msg 170, Level 15, State 1, Line 1
Line 1: Incorrect syntax near 'name'.
Server: Msg 102, Level 15, State 1, Line 3
Incorrect syntax near 'Enterprise'.
Server: Msg 170, Level 15, State 1, Line 6
Line 6: Incorrect syntax near 'has'.
Server: Msg 102, Level 15, State 1, Line 7
Incorrect syntax near 'Query'.
Server: Msg 170, Level 15, State 1, Line 12
Line 12: Incorrect syntax near 'f'.



and I would like to know, is this normal? and if this is normal, i would like to know what to do after inputting the text on SQL Querry Analyzer? the guide just says to input the text, "Query->Execute" then input the another text "Query->Execute" again but no additional steps are specified. This is my first time at something like this, I would appreciate any help someone can provide.

 

[akosiyam]

can you please send me in YM ? can DL those files on MF need to pay before download threcedgn@yahoo.com

 

[baubau1234]

hi,I have used this tutorial to install the server and client.The server started ok, I`ve used an editor to create an account and all, but when I start the Client, I don`t have any server to connect to. Any ideas?Thanks

Demo of Enc Team's Mu Season 6 OFFLINE (2.0.4.0) installed and running Server+Client on 1 PC without internet connections.Download ALL Files and follow Instructions in Guide.rarENC TEAM MU OFFLINE SEASON 6SERVER +TUTORIALS HOW TO SET-UP +TOOLSIts all in here! [Server, Fixes, Client, Patch, Tools/Editors and Set-up Guide]

You must be registered to see links

 

[KarLi]

opened ports?
edited IP correctly on client and server files?

there are many things ... so explain your problem more and also show us how u edit configs.

 

[baubau1234]

opened ports?
edited IP correctly on client and server files?

there are many things ... so explain your problem more and also show us how u edit configs.

I think I found the issue.

any idea where I change the two 127.0.0.1 IPS please?

 

[yukiscary]

Hi, i download and follow instruction, but once i run MuServer StartUp everything seem fine until reach gamesever it just keep show running without anything happen (just saw some loading icon on mouse for awhile but no other thing open)
Could someone advise on this pls..