Mu Season 6 Offline - success!!!

[hivboy2]

GS Always crash what to do??

 

[Mark Kram]

here's my YM: Bismarck_07@yahoo.com
please teach me how to setup an MU season6.
actually im a newbie .
tnx for your consideration

 

[kenshee]

please send me the file on my email enald20@yahoo.com. thanks a lot sir please also add the guide

 

[nergama81]

well i got a problem concerning the hexing of client. either it wont show servers or disconnect entirely

 

[djvener]

your files in mediafire have virus detected to my antivirus
list

You must be registered to see links

You must be registered to see links

 

[x00000]

I have a problem to download part2 of client, I copyed to my file on mediafire, it's work,

You must be registered to see links

 

[CAPITOL]

Can you give a guide using MUE_FREE_S6EP3 Server Files?

 

[k4nt]

Hi po, pde po pa reupload ng client? Broken link na po kasi sa mediafire eh. Thanks po!!!

 

[KSH]

Tarrent Sir............. Can you give me client part 2 and part 1

 

[MU Online SEA]

Tried this server files but the game was lag.

 

[hunterx2210]

If you got a problem with MF download, save the file into your MF account, then you're all be able to download it
Oh I for got, I got a problem with your MuMaker
I Run server in VMware, so when I use MuMaker in it, it turn out to be application error ! and can't be open
Any suggestion ?

 

[hunterx2210]

Got another problem here
Server run in VMware 100% work
But client in real PC doesn't show any list server to go in. Please help me ! What did I do wrong ?

 

[MU Online SEA]

Got another problem here
Server run in VMware 100% work
But client in real PC doesn't show any list server to go in. Please help me ! What did I do wrong ?
View attachment 139136

Check and config your ServerList.dat in "ConnectServer\Data".

 

[Tarrent]

If you got a problem with MF download, save the file into your MF account, then you're all be able to download it
Oh I for got, I got a problem with your MuMaker
I Run server in VMware, so when I use MuMaker in it, it turn out to be application error ! and can't be open
Any suggestion ?

Hi all, never thought this is possible, thanks for suggesting! BTW I have re-uploaded the server files into a mirror link, pm me if downloads will still have problems:




[NEW: CLIENT and PATCH]

Client (Part 1 of 4, 200MB)

You must be registered to see links

Client (Part 2 of 4, 200MB)

You must be registered to see links

Client (Part 3 of 4, 200MB)

You must be registered to see links

Client (Part 4 of 4, 40.4MB)

You must be registered to see links

Patch 1.07 (2.2MB)

You must be registered to see links

well i got a problem concerning the hexing of client. either it wont show servers or disconnect entirely

Hex the IP's one by one, if the IP you're using is shorter than what's currently in main.exe, be sure to replace the old (left-over) IP's with 00. i.e.,

original IP: 192.168.87.250
yours is 10.2.16.1
left-overs: 7.250 --> replace each character with 00

Got another problem here
Server run in VMware 100% work
But client in real PC doesn't show any list server to go in. Please help me ! What did I do wrong ?
View attachment 139136

Not sure how ENC Team's server files will go with VMWare. But if there are no servers, pls. re-check that you have followed all instructions correctly (its probably because of missed SQL server set-up, forgotten IP's that needs to be edited across several files, or improper main.exe hexing)

 

[billcnn123]

How To thoroughly appreciate it.



Get your key hex main 1.07 ip I solved it

 

[andyw68]

Hi ive downloaded all files ok and when i go to start server i get an error when i start up the mu server start
the following start uo ok just the game server says ENCgames.dll not found ive replaced it but still the same any ideas please

 

[tonka1211]

Server is up and running fine .

I am trying to make my server so that after the first reset your stats go back to default but you gain +500 per reset.

This is working fine except for the FIRST reset where you don't get any stats. How do i fix this?

At the moment i get :
Reset 1 : 0 stats
Reset 2 : 500 stats
Reset 3 : 1000 stats

I want it to be :
Reset 1 : 500 stats
Reset 2 : 1000 stats
Reset 3 : 1500 stats

This is what i have in my ENCCommands file :

[ResetSystem]
ENCResetsColumn = Resets
ENCDailyResetsColumn = ResetsDay
ENCWeeklyResetsColumn = ResetsWeek
ENCMonthlyResetsColumn = ResetsMonth
ENCMasterResetsColumn = MasterResets
ENCIsResetCommand = 1 // Default: 0 --> Enable: 1 / Disable: 0
ENCIsAcumulativeReset = 0 // Default: 0 --> Enable: 1 / Disable: 0
ENCResetLevelNormal = 400 // Default: 400
ENCResetLevelVIP_1 = 380 // Default: 380
ENCResetLevelVIP_2 = 360 // Default: 360
ENCResetLevelVIP_3 = 340 // Default: 340
ENCResetLevelVIP_4 = 320 // Default: 320
ENCResetLevelVIP_5 = 300 // Default: 300
ENCPointsPerResetNormal = 500
ENCPointsPerResetVIP_1 = 600
ENCPointsPerResetVIP_2 = 700
ENCPointsPerResetVIP_3 = 800
ENCPointsPerResetVIP_4 = 900
ENCPointsPerResetVIP_5 = 1000
ENCLevelAfterResetNormal = 1 // Default: 1
ENCLevelAfterResetVIP_1 = 1 // Default: 1
ENCLevelAfterResetVIP_2 = 1 // Default: 1
ENCLevelAfterResetVIP_3 = 1 // Default: 1
ENCLevelAfterResetVIP_4 = 1 // Default: 1
ENCLevelAfterResetVIP_5 = 1 // Default: 1
ENCMaxResets = 500 // Default: 500

Is this the only file? or is there something i am missing

 

[tonka1211]

any help with what i posted above?

 

[Robi Roi Reyes]

is it compatible in win 7?

 

[Robi Roi Reyes]

i cant install SQL 2000 on windows 7 64bit