[Easy]PortForward Use Router/Modem

[Pink Lady]

1.Portforward
OR
1.Port DMZ

DMZ Port Step : There Is Not The Same Router With This Step: Open Router Setting>Advanged Setup>NAT>DMZ>Enable>:ut IP::

ScreenShot:
Must Remember The ID And Password Modem/Router


Use Portforward Or DMZ Host:


Use IP IN:

You must be registered to see links

Rules Index : 1,2,3
Application : ExampleekaronPort
Protocol : ALL
Start Port Number :80
End Port Number :80
Local IP Address :

You must be registered to see links

Like Thats:


DMZ Port:

2.Microsoft Loopback adapter in Windows XP
----------------------------------------
1. Click Start, and then click Control Panel.
2. If you are in Classic view, click Switch to Category View under Control Panel in the left pane.
3. Double-click Printers and Other Hardware, and then click Next.
4. Under See Also in the left pane, click Add Hardware,and then click Next.
5. Click Yes, I have already connected the hardware, and then click Next.
6. At the bottom of the list, click Add a new hardware device, and then click Next.
7. Click Install the hardware that I manually select from a list, and then click Next.
8. Click Network adapters, and then click Next.
9. In the Manufacturer box, click Microsoft.
10. In the Network Adapter box, click Microsoft Loopback Adapter, and then click Next.
11. Click Finish.

*Internet Protocol (TCP/IP)
IPAddress=192.168.5.10 <---http://whatismyip.org
SubnetMask=255.255.255.0
DefaultGateway=192.168.5.25
^
*Pictures Internet Protocol (TCP/IP)
----------------------------------------
Part 1 :

Part 2 :

Part 3 :

*OFF FIREWALL IN Computer FOR MAKE YOUR PORT WORK!

*Check Port:

You must be registered to see links

*WhatIsMyIp:

You must be registered to see links

*Website Port : 80 - 80

 

[ryl1single]

is it for local ?

 

[Pink Lady]

yes...

 

[adastmin]

Help to configure the modem P660HT2! they are many) here it will be good

 

[Pink Lady]

You must be registered to see links

if your ip dynamic you must loopback for make your ip (Local)

your have DMZ port in your router/modem? if have easy to make port working!

tools:

You must be registered to see links

 

[Warmonger]

You might want to remove port 10000 from the list, as it will cause people to be able to make items, edit stats, etc.