- Joined
- Dec 16, 2011
- Messages
- 118
- Reaction score
- 11
Hello RaGEZONE community.
I was thinking of having a look at Hrace's topic, but I noticed it was closed and the links were down, so I thought of uploading his files, since I had them in my PC.
You can use THIS GUIDE! to set up.
Server files are to be downloaded from here:
And you can get the client here:
You can download VirtualBox or VMWare, for this server.
Links Box!
Previous Release
Click below for Client!
Server editors here:
WinSCP here:
1)Download the Server Files from 4shared, download VirtualBox and the HGN client.
2)Install VirtualBox.
3)Open VBox and click on "File", then Preferences, then Network and press on the Wrench , in the right side of the window that pops up.
3)Set it up like the following picture:
WinSCP here:
4)Go to VBox, press "File" - "Import Appliance.." and go to the folder where your Hrace009 files are located. Double click the .ovf file. Click Next and Finish, then wait until it imports the files.
5)Right-click the "PWServer- Hrace009" line in your VBox window and press on Settings and go to Network.
This shall look like:
Note: Mac Address is 080027AD81AD .
6)After setting all of these up, you can start the server by double-clicking on its name, in VBox. (I don't think I have to post an image here, huh? xD)
7)It shall now load some stuff, then it will ask you for Login and Password.
Log in: root
Password: hrace009
Enter this and it shall say something like root@pwhrace009 .
8)Write " ./tomcat_start.sh " and let it load.
9)After it loaded, write " ifconfig eth0 " and see your IP. It shall be 192.168.0.10 .
10)Open up your browser and try these pages:
If these worked , then you're running a successful local-host server. Congratulations.
Note: If you want an online server, look up for some guides around, to make the files online. You simply have to change VirtualBox to Bridged Adapter, change some IPs in there, open ports and then mess again with serverfiles.
Note 2: For people who do not know, when you type in the Password ( the "root-hrace009" part), you will NOT!!! be able to see what you are typing. So look at your keyboard when you type it and don't rage cause it is wrong.
Note 3: You might want to download WinSCP , to edit your server files.
The Links Box will be below, in-case people don't realize it is up there. It might happen.
Links Box!(a.k.a. Download Box)
Previous Release
Click below for Client!
Server editors here:
WinSCP here:
Credits to Hrace009 , TaylorIsCrazy , 343
If you have any questions, leave a reply here or send me a PM and I'll do my best to help out.
~Regards
I was thinking of having a look at Hrace's topic, but I noticed it was closed and the links were down, so I thought of uploading his files, since I had them in my PC.
You can use THIS GUIDE! to set up.
Server files are to be downloaded from here:
You must be registered to see links
And you can get the client here:
You must be registered to see links
You must be registered to see links
You must be registered to see links
Links Box!
You must be registered to see links
You must be registered to see links
Previous Release
Click below for Client!
You must be registered to see links
You must be registered to see links
You must be registered to see links
You must be registered to see links
Server editors here:
You must be registered to see links
WinSCP here:
You must be registered to see links
How to set up
-For people that can't follow the other guide-
1)Download the Server Files from 4shared, download VirtualBox and the HGN client.
2)Install VirtualBox.
3)Open VBox and click on "File", then Preferences, then Network and press on the Wrench , in the right side of the window that pops up.
3)Set it up like the following picture:
WinSCP here:
You must be registered to see links
5)Right-click the "PWServer- Hrace009" line in your VBox window and press on Settings and go to Network.
This shall look like:
6)After setting all of these up, you can start the server by double-clicking on its name, in VBox. (I don't think I have to post an image here, huh? xD)
7)It shall now load some stuff, then it will ask you for Login and Password.
Log in: root
Password: hrace009
Enter this and it shall say something like root@pwhrace009 .
8)Write " ./tomcat_start.sh " and let it load.
9)After it loaded, write " ifconfig eth0 " and see your IP. It shall be 192.168.0.10 .
10)Open up your browser and try these pages:
You must be registered to see links
You must be registered to see links
You must be registered to see links
If these worked , then you're running a successful local-host server. Congratulations.
Note: If you want an online server, look up for some guides around, to make the files online. You simply have to change VirtualBox to Bridged Adapter, change some IPs in there, open ports and then mess again with serverfiles.
Note 2: For people who do not know, when you type in the Password ( the "root-hrace009" part), you will NOT!!! be able to see what you are typing. So look at your keyboard when you type it and don't rage cause it is wrong.
Note 3: You might want to download WinSCP , to edit your server files.
The Links Box will be below, in-case people don't realize it is up there. It might happen.
Links Box!(a.k.a. Download Box)
You must be registered to see links
You must be registered to see links
Previous Release
Click below for Client!
You must be registered to see links
You must be registered to see links
You must be registered to see links
You must be registered to see links
Server editors here:
You must be registered to see links
WinSCP here:
You must be registered to see links
Credits to Hrace009 , TaylorIsCrazy , 343
If you have any questions, leave a reply here or send me a PM and I'll do my best to help out.
~Regards
Last edited: