Tutorial: How to use no-ip duc!! With pictures!!!

[xAtticusx]

Is your server connected to the internet?

 

[das7002]

I try to do as you teach.

Received.

and

Your network isn't working...

 

[Drakaer]

Put your gateway in resolv.conf

I had an issue where I couldn't connect to the repositories and doing this fixed my issue.

 

[ihsanfree]

Step3: Install No-ip duc

Fist, start your server and login as root.

Than tipe in: " apt-get install no-ip "

The installer starts and guides you throught.
At first you have to insert your No-IP.com user name.
(NOT the Hostname)

The Password

The updating intervall. All 30 minutes is all right.

List of hosts or groups. if you just use one host you can leave this field emty.

Network device name, can be left like it is.

and that as well.

That was the installation!!!

reboot your server and your done with that.

The only thing you need now, is to open the port 80 for your serverip (hrace009 release=192.168.0.10)

If you have followed all that you have now a public server !!!


Attention: You can't test if your server is availible at that Host name, because it is your public ip.

i finish this,, but i just can open the

You must be registered to see links

why i can't open the

You must be registered to see links

,,, what after i finish instal no-ip i start the ./tomcat_start.sh :?::?:

 

[Zorno]

Its funny to see how people install the DUC on virtual machines :

Just for the lazy ones, the simple way is to install it on the host system then its just a routing thing to get your vBox or whatever online. ( tcp port 29000 to your vBox ip and its online )
Or ( if you have a hardware router ) check your manual. Most of them have support for dyndns and no-ip config.

 

[Drakaer]

Its funny to see how people install the DUC on virtual machines :

Just for the lazy ones, the simple way is to install it on the host system then its just a routing thing to get your vBox or whatever online. ( tcp port 29000 to your vBox ip and its online )
Or ( if you have a hardware router ) check your manual. Most of them have support for dyndns and no-ip config.

You don't even need to install it all do you? All the software does is tells their server were to redirect to. Cant you just change the redirection to your ip of your router on their site then forward the ports to your server?

 

[343]

You are most likely correct Drakaer!

Honestly I think it's because people are lazy and or ignorant. The service I use (like no-ip. but a different one) I don't have any software installed. I log into my account with the provider and make sure to update my WAN IP when/if it changes...

 

[Zorno]

Correct. That DUC does nothing else then this so you can install it wherever you want as long as it knows your wan IP :

 

[Ozuru]

-bump- this should be stickied, this is what I used to get server up...

 

[Lucas Gabriel]

Estou com está dúvida:

You must be registered to see links

 

[saykosteve]

hey , how about using VMWare? -_-

 

[fgru]

this is OT but here >

You must be registered to see links

 

[John Ward]

can somone help me plz