Tutorial: How to use no-ip duc!! With pictures!!!

[Drakaer]

okay, all files changed to 192.168.178.x
now i test it again

---------- Post added at 10:50 PM ---------- Previous post was at 10:32 PM ----------



okay, i do eveverything what u said,
change all 192.168.0.x ip to 192.168.178.x in every file which needed
and i use bridge connection with my wlan, also active the function which alouds VirtualBox Host-Only Network share the inet connection.
then i start again, i can ping my router, but lose my internet connection, then i ping to the internet.. nothing again :






okay, now i can ping to my router, but not to the internet
this is my interface
# The primary network interface
auto eth0
iface eth0 inet static
address 192.168.178.10
netmask 255.255.255.0
network 192.168.0.0
broadcast 192.168.178.255
gateway 192.168.178.1
# dns-* options are implemented by the resolvconf package, if installed
dns-nameservers 192.168.178.1

You dont need internet connection sharing on. Try turning it off and see if it helps.

 

[unkownzh]

You dont need internet connection sharing on. Try turning it off and see if it helps.

no, it doesnt help.....

i m deperate now...

 

[fgru]

idk with wlan - sry i use cable and works very fine

dns-nameservers 192.168.178.1 -> i this the same of /etc/resolved.conf ? or only in interfaces file

 

[Hemer]

if you have a native linux server with a wlan card you just have to change eth0 to wlan0.
With vBox in bridged mode it doesn't metter if your hostcomputer of the vbox have a cable or wireless connection.

 

[unkownzh]

if you have a native linux server with a wlan card you just have to change eth0 to wlan0.
With vBox in bridged mode it doesn't metter if your hostcomputer of the vbox have a cable or wireless connection.

i dont know... because i use VBOX Image PW 1.3.6. with 1.4.2 V 283 items from hrace009.....

it should be the same with urs...

anyone have teamview? XD and is pro with linux?....
:huh:

 

[343]

i dont know... because i use VBOX Image PW 1.3.6. with 1.4.2 V 283 items from hrace009.....

it should be the same with urs...

anyone have teamview? XD and is pro with linux?....
:huh:

I like that Teamview... thanks for tipping me off to it; now I know how I can help people if I have the time

 

[unkownzh]

I like that Teamview... thanks for tipping me off to it; now I know how I can help people if I have the time

343 help me to solve my problem ;-D

he is really pro in linux

;-)

see you

btw. do u know which line can change the +hp in armors? XD
i only find out which change mdef, pdef, lvl, and so on.. but not the +hp if it is refine...

 

[x2PAC]

You already tried with hamachi?
Da to install hamachi on ubuntu?

 

[Exodus]

Sorry for bumping this topic, but I managed to get everything working, except now when I put the IP or hostname in my serverlist.txt, i can't connect to the server. I can ping to it from Vbox, but I get the -- thing in PW and can't connect to it. Does it only work if you have a router? I only have a modem, and I tried opening port 80 but that didn't help either.

 

[Drakaer]

Perfect World uses port 29000. Try opening that. Idk if it will work with a modem. Also try a site like

You must be registered to see links

and type the ip of your server eg myserver.no-ip.biz and 29000 in the port and see if its open.

 

[Exodus]

Hmm, it's closed. I tried opening it with my firewall but it still shows as closed. How can I open it?

I managed to open it, but I still can't connect. It waits for 40 seconds then disconnects.

 

[tanjunze]

What Linux is this ?

 

[Hemer]

I have made that Tutorial with the Harace release, cause I think that's the most up to date startingpoint for the most of you.
So it should be Ubuntu 8.04.
I'm not that shure, because i don't have that image anymore.


Hendrik

 

[fgru]

works with Ubuntu 8.x / 9.x / 10.x - other idk ...

 

[Nikol@]

Thanks everyone I have a working public server now.
I just needed to open the ports on my router and it works now. :

What ports u opened so ur server can be viewed outside?:glare:

 

[Drakaer]

I opened ports 29000 and 8080. I only opened 8080 so that my friend can use pwAdmin. You can get people to register with

You must be registered to see links

on port 80 which you may need to forward.

 

[Nikol@]

I opened ports 29000 and 8080. I only opened 8080 so that my friend can use pwAdmin. You can get people to register with

You must be registered to see links

on port 80 which you may need to forward.

What i a irony.. i can ping my server.. but all ports are closed.. and i opened them, and rebooted machine.. it should work..but it's not workign.. :/:

 

[Drakaer]

I used this site to test my if my ports were forward properly.

You must be registered to see links

I assume you are using bridged mode for your server connected to a router? Did you forward the ports to your server or the host machine (if using vbox)?

 

[Nikol@]

Did you forward the ports to your server or the host machine (if using vbox)?

erm:/:

I use vbox @@

 

[Drakaer]

If using bridged mode with vbox forward the ports to your vbox ip not the host. ie forward to 192.168.0.10