Solution of C9 (AgentServer: Token Timeout)

[PX2000]

First of all I am a victim of this C9(AgentServer: Token Timeout)... I struggled a week searching, posting in many forums for help but no can help me...I thought this is the end of me... After a week of testing... finally I CAN ENTER MY SERVER via WAN!...

How to:

In your Local Area Network
If you have a LAN config basically this
IP:192.168.1.XX
Subnet: 255.255.255.0
Gateway: 192.168.1.1

Click "Advanced..."

In the IP addresses click add and add your WAN ip
with subnet mask 255.255.255.0 then OK OK OK OK

Now in the cert srNodeType.ini
wip: your WAN IP
nip: your WAN IP

Now in server MachineManager, AgentServer, SR_GameServer
spoof it to your WAN IP using chern0byl's patch 103 - 105...

Now your good to go!...


HOPE IT HELPS!!! Give a thanks if this guide helps you!!..

 

[hypnato]

Re: [Guide] Solution of C9 (AgentServer: Token Timeout)

How did you get around your router claiming the WAN address?

 

[Eroticus]

Re: [Guide] Solution of C9 (AgentServer: Token Timeout)

Some one tested ? working ?


-----EDIT----- !!!

WORKS !!! TESTED !!!

 

[Blatnoi]

Re: [Guide] Solution of C9 (AgentServer: Token Timeout)

no it doesn't work people get c9 error anyway, the only solution for router is demilitarized zone i forwarded all local connections to wan ip and it works fine

 

[Jangan]

Re: [Guide] Solution of C9 (AgentServer: Token Timeout)

wait what? token timeout means people cant login to the server? i get that on my server alot yet its always full

hmm? and this does not make sense >.<

 

[Eroticus]

Re: [Guide] Solution of C9 (AgentServer: Token Timeout)

wait what? token timeout means people cant login to the server? i get that on my server alot yet its always full

hmm? and this does not make sense >.<

nope ... its another problem

when i trying connect from Local IP every thing working perfect but when i trying connect from NET IP i getting C9 in game and BloodyNetworking eror in AgentServer

no it doesn't work people get c9 error anyway, the only solution for router is demilitarized zone i forwarded all local connections to wan ip and it works fine

DMZ not working for me ><

 

[Jangan]

Re: [Guide] Solution of C9 (AgentServer: Token Timeout)

1) Port forward
2) use your wan ip in the config files
3) set up the files properly

and that will do it.... i dont understand all these complications...

 

[enis1994]

Re: [Guide] Solution of C9 (AgentServer: Token Timeout)

Oh Thanks . Yes working.

 

[fathyhero]

Re: [Guide] Solution of C9 (AgentServer: Token Timeout)

Nice one ty

 

[Eroticus]

Re: [Guide] Solution of C9 (AgentServer: Token Timeout)

What i put here ?


--------

NVM ... fixed my DSN

 

[gengkey02]

Re: [Guide] Solution of C9 (AgentServer: Token Timeout)

hey why my other pc cannot connect to the server it say server closed..

@Jangan

1)can you tell what and which port to forward?

2) cannot use Wan ip in config files, required IPv4 only.

3)My isp give me dynamic ip plus im using router,how to setup.

 

[vidalokajr]

Re: [Guide] Solution of C9 (AgentServer: Token Timeout)

for me dont work error machinemanager no work

 

[lucastx]

Re: [Guide] Solution of C9 (AgentServer: Token Timeout)

Don't works here

 

[firat0912]

Re: [Guide] Solution of C9 (AgentServer: Token Timeout)

working?

 

[Eroticus]

Re: [Guide] Solution of C9 (AgentServer: Token Timeout)

nWorks for me but BloodyNetwork for friend ... on gateaway)


Bloodynetwork = auto kick

 

[Maliq]

Re: [Guide] Solution of C9 (AgentServer: Token Timeout)

Ok i have an idea, join my server here 91.125.207.139 port 15779 and acc asdasd, pass asdasd. Lets see if it really works!


EDIT:
Three words: Does Not Work!

Now cant even join locally!

 

[Eroticus]

Re: [Guide] Solution of C9 (AgentServer: Token Timeout)

Works on my PC ( Router Cisco !!) ! Awesome Guide !!!


Thanks bro

 

[Maliq]

Re: [Guide] Solution of C9 (AgentServer: Token Timeout)

Works on my PC ( Router Cisco !!) ! Awesome Guide !!!
Thanks bro

Ok, here is what i did:
1) changed wip and nip to my global ip in srNodeType.ini
2) changed every ip inside server.cfg to my global ip
3) spoofed all the required files with my local ipv4
4) created a fixed ip as this guide suggested and then turned my global ip into an extra ipv4!
5) executed server files in correct order
6) used edxloader6 to log into server from another computer on the same network in my home

Am i missing something? I noticed a pink message regarding connection closed or something during execution of server files.

ServerCord no found. Session Closed!

1) Port forward
2) use your wan ip in the config files
3) set up the files properly

and that will do it.... i dont understand all these complications...

That will not do it unfortunatelly as the server exes have been altered with asm and spoofed to prevent people from creating online servers with the vsro files, it is really selfish tbh. I recently found out about the real files release and i missed out the clean files and now i am using files which have been customised to not work in creating online servers! I just hope somebody releases the clean files. People need to stop acting like epvp wannabies.

 

[Eroticus]

Re: [Guide] Solution of C9 (AgentServer: Token Timeout)

Ok, here is what i did:
1) changed wip and nip to my global ip in srNodeType.ini
2) changed every ip inside server.cfg to my global ip
3) spoofed all the required files with my local ipv4
4) created a fixed ip as this guide suggested and then turned my global ip into an extra ipv4!
5) executed server files in correct order
6) used edxloader6 to log into server from another computer on the same network in my home

Am i missing something? I noticed a pink message regarding connection closed or something during execution of server files.






That will not do it unfortunatelly as the server exes have been altered with asm and spoofed to prevent people from creating online servers with the vsro files, it is really selfish tbh. I recently found out about the real files release and i missed out the clean files and now i am using files which have been customised to not work in creating online servers! I just hope somebody releases the clean files. People need to stop acting like epvp wannabies.

Then change to your NET IP !!! Every where
Server.cfg
CERT(srNodeType.ini)
SMC (smc_updater.cfg / ServiceManager.cfg)
AgentServer.exe / MachineManager.exe (With srPatcher_1.0.6.exe) !!!!

Thats all

 

[Maliq]

Re: [Guide] Solution of C9 (AgentServer: Token Timeout)

Thanks, i do remember trying this previously and getting pink fatal msg in one of the vsro exe files but i will try it once more. If for some reason it works this time then i will be in trouble because my ip is dynamic! All hope is not lost though as i have DMZ to try next!

Nope does not work, i dont really know why i tried it in the first place! from the same network, on another computer i cannot join through the global ip. Here is what i got. Try joining now and i will let server on and see if others can actually join to it.

if you do that to your ip you are basically defining another local ip so I dont expect it to work really, but i do welcome anyone to try join my server, the ip is on the picture below and vsro client needed is v188!