Nexus TK Server (DB+Source Code+Map Editor)

Page 10 of 11 FirstFirst ... 234567891011 LastLast
Results 136 to 150 of 164
  1. #136
    Member Nobel is offline
    MemberRank
    Aug 2011 Join Date
    BaliLocation
    36Posts

    Re: Nexus TK Server (DB+Source Code+Map Editor)

    Hope this project still around... as still work perfectly on Windows 10.
    [[SitiJenar]]

  2. #137
    .:Nexus Slave:. DevilSpeak is offline
    SubscriberRank
    Oct 2010 Join Date
    Mistet minnerLocation
    306Posts

    Re: Nexus TK Server (DB+Source Code+Map Editor)

    Quote Originally Posted by Nobel View Post
    Hope this project still around... as still work perfectly on Windows 10.
    Yes its is still active.

    I have started work on these files as I have some free time.

    Would like to see some progress for Nexus Developments here in the future.

  3. #138
    .:Nexus Slave:. DevilSpeak is offline
    SubscriberRank
    Oct 2010 Join Date
    Mistet minnerLocation
    306Posts

    Re: Nexus TK Server (DB+Source Code+Map Editor)

    I have setup these files using a Virtual Box with ubuntu 12.04 LTS (32bit) installed.

    Server's starts just fine, as I added db information from @Nobel release.

    I have turned the firewall off, and when I try to login all I get is that dam "Chaos occuring"...

    Sure I can use Nobel Cygwin, but wanted to post how I setup everything so far.

    Any ideas anyone? I suspect it is something simple stupid...

    Thank you in advance.

    - - - Updated - - -

    Quote Originally Posted by DevilSpeak View Post
    I have setup these files using a Virtual Box with ubuntu 12.04 LTS (32bit) installed.

    Server's starts just fine, as I added db information from @Nobel release.

    I have turned the firewall off, and when I try to login all I get is that dam "Chaos occuring"...

    Sure I can use Nobel Cygwin, but wanted to post how I setup everything so far.

    Any ideas anyone? I suspect it is something simple stupid...

    Thank you in advance.
    Yap it was something stupid I missed....

    In login.conf you need to set require_reg: 1 <---- to a 0

    And that fixes that Chaos occuring error.

  4. #139
    .:Nexus Slave:. DevilSpeak is offline
    SubscriberRank
    Oct 2010 Join Date
    Mistet minnerLocation
    306Posts

    Re: Nexus TK Server (DB+Source Code+Map Editor)

    Happy Holiday's

    I have been able to figure out how to add warp gates to the maps finally.

    Takes lots of work to add all the x&y. but it is actually dam fun to work on these files.

    You have to add the information to the /root/mithia/warp/warp_main.conf.
    and make sure you set the gates to match the locations you want on the maps.
    This is what I found from looking at the calls from the config files.

    Remember to re compile, after any data base changes.
    But be sure to make a backup first,so you can revert back,so not to have to start all over.

    This is a learning process of hit or miss.

    I will post everything I learn here to share, just will take me a bit to figure things out.

    I also did some editing for staff panel.


    Last edited by DevilSpeak; 29-12-17 at 03:36 AM.

  5. #140
    Newbie MonsieurDip is offline
    MemberRank
    Jan 2018 Join Date
    Nashville, TNLocation
    4Posts

    Re: Nexus TK Server (DB+Source Code+Map Editor)

    Sorry if I'm being dumb for misunderstanding, but I'm having a hard time understanding how to even begin setting this up. I've read this thread over and over, I've read the documents included. I have Ubuntu installed on VirtualBox, but I don't understand how to even begin setting up the server.

    Thank you for releasing the resources to do this, and thank you to everyone who has contributed in sharing their experiences to teach others. However, is there a detailed guide explaining what to do?

  6. #141
    .:Nexus Slave:. DevilSpeak is offline
    SubscriberRank
    Oct 2010 Join Date
    Mistet minnerLocation
    306Posts

    Re: Nexus TK Server (DB+Source Code+Map Editor)

    Quote Originally Posted by MonsieurDip View Post
    Sorry if I'm being dumb for misunderstanding, but I'm having a hard time understanding how to even begin setting this up. I've read this thread over and over, I've read the documents included. I have Ubuntu installed on VirtualBox, but I don't understand how to even begin setting up the server.

    Thank you for releasing the resources to do this, and thank you to everyone who has contributed in sharing their experiences to teach others. However, is there a detailed guide explaining what to do?
    Hi and WELCOME to RaGEZONE!!

    When I get some time next week, I promise to post a small guide on how to setup Nobel files with his configs "One map and mobs".

    Have a nice weekend.


    ---------------------------------------------------------------UPDATED 1/5/2018-----------------------------------------------------
    Here is a guide i made for everyone.

    Nexus Mini guide with ubuntu 12.04 LTS (32bit) By: DevilSpeak

    1. Install ubuntu clean (base & ssh server) only.
    2. Install requirement package

    sudo apt-get update &&

    sudo apt-get upgrade
    apt-get install build-essential

    sudo apt-get install gcc make gdb

    sudo apt-get install liblua-5.1

    sudo apt-get install libmysqlclient-dev libmysqlcppconn-dev libmysqld-dev libmysql++-devapt-get install liblua5.1-0-dev liblua50-dev liblualib50-dev

    3. sudo apt-get install mysql-server

    4.Install Apache

    sudo apt-get install apache2

    4.a Install PHP
    sudo apt-get install php5 libapache2-mod-php5
    sudo /etc/init.d/apache2 restart

    4.b Check Apache

    Open a web browser and navigate to http://localhost/. You should see a message saying It works!

    4.c Check PHP
    php -r 'echo "\n\nYour PHP installation is working fine.\n\n\n";'

    4.d Install PhP Admin

    sudo apt-get update && sudo apt-get upgrade -y
    sudo apt-get install phpmyadmin

    5. Transfer server files over to your new linux server via winscp.

    5.b Make sure files have correct permissions.

    Create db & user mysql

    6. Restore mithia.sql

    7. Edit conf

    7.a compile server after ANY changes to server.

    Enter "make all" in terminal. (without quotes)

    8. Start server enter this in your terminal
    ./login-server &./save-server &./char-server &./map-server

    There it is a simple guide to install your nexus server on ubuntu 12.04 LTS (32bit).
    I will edit/update this as time allows.

    Credits: @Nobel and all who were involved in this release.
    Last edited by DevilSpeak; 05-01-18 at 05:56 PM.

  7. #142
    Member Nobel is offline
    MemberRank
    Aug 2011 Join Date
    BaliLocation
    36Posts

    Re: Nexus TK Server (DB+Source Code+Map Editor)

    Yay, thanks alot for the tutorial devilspeak, also DarkAlucard who always replying the questions. I will post the tutorial how to manage this server using cygwin on windows 10 at 1st page soon.
    [[SitiJenar]]

  8. #143
    Newbie MonsieurDip is offline
    MemberRank
    Jan 2018 Join Date
    Nashville, TNLocation
    4Posts

    Re: Nexus TK Server (DB+Source Code+Map Editor)

    Quote Originally Posted by DevilSpeak View Post
    Hi and WELCOME to RaGEZONE!!

    When I get some time next week, I promise to post a small guide on how to setup Nobel files with his configs "One map and mobs".

    Have a nice weekend.


    ---------------------------------------------------------------UPDATED 1/5/2018-----------------------------------------------------
    Here is a guide i made for everyone.

    Nexus Mini guide with ubuntu 12.04 LTS (32bit) By: DevilSpeak

    1. Install ubuntu clean (base & ssh server) only.
    2. Install requirement package

    sudo apt-get update &&

    sudo apt-get upgrade
    apt-get install build-essential

    sudo apt-get install gcc make gdb

    sudo apt-get install liblua-5.1

    sudo apt-get install libmysqlclient-dev libmysqlcppconn-dev libmysqld-dev libmysql++-devapt-get install liblua5.1-0-dev liblua50-dev liblualib50-dev

    3. sudo apt-get install mysql-server

    4.Install Apache

    sudo apt-get install apache2

    4.a Install PHP
    sudo apt-get install php5 libapache2-mod-php5
    sudo /etc/init.d/apache2 restart

    4.b Check Apache

    Open a web browser and navigate to http://localhost/. You should see a message saying It works!

    4.c Check PHP
    php -r 'echo "\n\nYour PHP installation is working fine.\n\n\n";'

    4.d Install PhP Admin

    sudo apt-get update && sudo apt-get upgrade -y
    sudo apt-get install phpmyadmin

    5. Transfer server files over to your new linux server via winscp.

    5.b Make sure files have correct permissions.

    Create db & user mysql

    6. Restore mithia.sql

    7. Edit conf

    7.a compile server after ANY changes to server.

    Enter "make all" in terminal. (without quotes)

    8. Start server enter this in your terminal
    ./login-server &./save-server &./char-server &./map-server

    There it is a simple guide to install your nexus server on ubuntu 12.04 LTS (32bit).
    I will edit/update this as time allows.

    Credits: @Nobel and all who were involved in this release.
    Thanks so much for taking the time to write up a tutorial! I'm running through it as we speak. I'm a bit new to this and just wanted to make a private server for a group of friends and eventually grow it, so I'll apologize ahead of time if I have any questions that might be dumb.

    Quote Originally Posted by Nobel View Post
    Yay, thanks alot for the tutorial devilspeak, also DarkAlucard who always replying the questions. I will post the tutorial how to manage this server using cygwin on windows 10 at 1st page soon.
    Thank you, too! I look forward to seeing your tutorial!

  9. #144
    Newbie MonsieurDip is offline
    MemberRank
    Jan 2018 Join Date
    Nashville, TNLocation
    4Posts

    Re: Nexus TK Server (DB+Source Code+Map Editor)

    Quote Originally Posted by DevilSpeak View Post
    Hi and WELCOME to RaGEZONE!!

    When I get some time next week, I promise to post a small guide on how to setup Nobel files with his configs "One map and mobs".

    Have a nice weekend.


    ---------------------------------------------------------------UPDATED 1/5/2018-----------------------------------------------------
    Here is a guide i made for everyone.

    Nexus Mini guide with ubuntu 12.04 LTS (32bit) By: DevilSpeak

    1. Install ubuntu clean (base & ssh server) only.
    2. Install requirement package

    sudo apt-get update &&

    sudo apt-get upgrade
    apt-get install build-essential

    sudo apt-get install gcc make gdb

    sudo apt-get install liblua-5.1

    sudo apt-get install libmysqlclient-dev libmysqlcppconn-dev libmysqld-dev libmysql++-devapt-get install liblua5.1-0-dev liblua50-dev liblualib50-dev

    3. sudo apt-get install mysql-server

    4.Install Apache

    sudo apt-get install apache2

    4.a Install PHP
    sudo apt-get install php5 libapache2-mod-php5
    sudo /etc/init.d/apache2 restart

    4.b Check Apache

    Open a web browser and navigate to http://localhost/. You should see a message saying It works!

    4.c Check PHP
    php -r 'echo "\n\nYour PHP installation is working fine.\n\n\n";'

    4.d Install PhP Admin

    sudo apt-get update && sudo apt-get upgrade -y
    sudo apt-get install phpmyadmin

    5. Transfer server files over to your new linux server via winscp.

    5.b Make sure files have correct permissions.

    Create db & user mysql

    6. Restore mithia.sql

    7. Edit conf

    7.a compile server after ANY changes to server.

    Enter "make all" in terminal. (without quotes)

    8. Start server enter this in your terminal
    ./login-server &./save-server &./char-server &./map-server

    There it is a simple guide to install your nexus server on ubuntu 12.04 LTS (32bit).
    I will edit/update this as time allows.

    Credits: @Nobel and all who were involved in this release.
    Thank you so much for writing up a tutorial! I'm running through it as we speak. I don't have too much experience dealing with Linux/Ubuntu, so all of this is a learning experience for me. If I have any questions, please forgive me ahead of time if they're dumb.

    Quote Originally Posted by Nobel View Post
    Yay, thanks alot for the tutorial devilspeak, also DarkAlucard who always replying the questions. I will post the tutorial how to manage this server using cygwin on windows 10 at 1st page soon.
    Awesome! I look forward to seeing your tutorial as well. Thank you both for all of your help!

  10. #145
    .:Nexus Slave:. DevilSpeak is offline
    SubscriberRank
    Oct 2010 Join Date
    Mistet minnerLocation
    306Posts

    Re: Nexus TK Server (DB+Source Code+Map Editor)

    Quote Originally Posted by MonsieurDip View Post
    Thank you so much for writing up a tutorial! I'm running through it as we speak. I don't have too much experience dealing with Linux/Ubuntu, so all of this is a learning experience for me. If I have any questions, please forgive me ahead of time if they're dumb.


    Awesome! I look forward to seeing your tutorial as well. Thank you both for all of your help!

    Im happy you are able to set it up. If you like it please press like and rep if you would be so kind.

  11. #146
    Newbie MonsieurDip is offline
    MemberRank
    Jan 2018 Join Date
    Nashville, TNLocation
    4Posts

    Re: Nexus TK Server (DB+Source Code+Map Editor)

    Quote Originally Posted by DevilSpeak View Post
    Im happy you are able to set it up. If you like it please press like and rep if you would be so kind.
    I haven't fully gotten it set up yet. Trying to figure out all of the SQL stuff in Ubuntu is taking some time, but liked and repped anyway. You've still been a big help.

    - - - Updated - - -

    Quote Originally Posted by DevilSpeak View Post
    Im happy you are able to set it up. If you like it please press like and rep if you would be so kind.
    I haven't fully gotten it set up yet. Trying to figure out all of the SQL stuff in Ubuntu is taking some time, but liked and repped anyway.

  12. #147
    .:Nexus Slave:. DevilSpeak is offline
    SubscriberRank
    Oct 2010 Join Date
    Mistet minnerLocation
    306Posts

    Re: Nexus TK Server (DB+Source Code+Map Editor)

    Quote Originally Posted by MonsieurDip View Post
    I haven't fully gotten it set up yet. Trying to figure out all of the SQL stuff in Ubuntu is taking some time, but liked and repped anyway. ������ You've still been a big help.




    - - - Updated - - -



    I haven't fully gotten it set up yet. Trying to figure out all of the SQL stuff in Ubuntu is taking some time, but liked and repped anyway.
    Any issues, Id be more than happy to help.

  13. #148
    Registered phyfer is offline
    MemberRank
    Jan 2017 Join Date
    6Posts

    Re: Nexus TK Server (DB+Source Code+Map Editor)

    Does anyone have a code change fix for the WPE issue with clients after NexusTK712single.exe? I would really prefer to use the latest clients when testing our own content and changes ...

  14. #149
    Member Nobel is offline
    MemberRank
    Aug 2011 Join Date
    BaliLocation
    36Posts

    Re: Nexus TK Server (DB+Source Code+Map Editor)

    Just a quick answer from my old note
    /*if ((sd->PrevSeed == 0 && sd->NextSeed == 0 && CurrentSeed == 0)
    || ((sd->PrevSeed || sd->NextSeed) && CurrentSeed != sd->NextSeed)) {
    char RegStr[] = "WPEtimes";
    char AlertStr[32] = "";
    int WPEtimes = 0;

    sprintf(AlertStr, "Packet editing of 0x%X detected", RFIFOB(fd, 3));
    clif_Hacker(sd->status.name, AlertStr);
    WPEtimes = pc_readglobalreg(sd, RegStr) + 1;
    pc_setglobalreg(sd, RegStr, WPEtimes);
    session[sd->fd]->eof = 14;
    return 0;

    //Commenting this line around 9769 in clif.c, but this is make server vulnerable v7.12 Nobel, Feb 2016.
    }*/
    [[SitiJenar]]

  15. #150
    Registered phyfer is offline
    MemberRank
    Jan 2017 Join Date
    6Posts

    Re: Nexus TK Server (DB+Source Code+Map Editor)

    Thanks for the reply Nobel. I do have a few questions though. Line 9769 calls out packet 0x19. Is this the packet that is triggered by the false WPE? My map server window is showing 0x5 and when I scroll to that part in Clif.c I am seeing the code you replied with located at line 9638.

    Click image for larger version. 

Name:	line_9769.JPG 
Views:	27 
Size:	13.0 KB 
ID:	162407Click image for larger version. 

Name:	code_wpe.JPG 
Views:	32 
Size:	65.7 KB 
ID:	162408Click image for larger version. 

Name:	wpe_map.JPG 
Views:	26 
Size:	41.1 KB 
ID:	162409

    Edited: I may have misunderstood you. I thought the code you provided was the "fix" for the WPE issue. For now I have commented that part out and have the client 7.49 working. Maybe someone can provide input for a fix as well as the additional packets which are not defined in the code.
    Last edited by phyfer; 05-02-18 at 09:24 PM.



Page 10 of 11 FirstFirst ... 234567891011 LastLast

Advertisement