Here a small HowTo, how you crack DayZ Client Files with SmartSteamEmu 1.4.3.
1.) First you Need to Dowload SmartSteamEmu 1.4.3
*
You must be registered to see links
* *
You must be registered to see links
*
2.) After Downloading the SmartSteamEmu Files, you have to extract all files to Game directory or any directory.
Should then look like this:
You must be registered to see links
3.) Open SmartSteamEmu.ini and edit the neccessary Paths where you saved your Game Files.
SmartSteamEmu.ini is located in the SmartSteamEmu Main Folder.
Set up the correct Path to the DayZ.exe or DayZ_64.exe, Depending on which architecture
your operating system has.
Should then look like this:
You must be registered to see links
4.) To use some Launch Parameters, add in SmartSteamEmu.ini in the Row "CommandLine" your Paramters what you Needs.
Something like this: CommandLine = -maxMem=8192 -cpuCount=4 -exthreads=7 -noPause
Should then look like this:
You must be registered to see links
5.) Launch SmartSteamLauncher.exe and not the game executable.
SmartSteamEmuLauncher.exe is located in the SmartSteamEmu Main Folder.
Should then look like this:
You must be registered to see links
6.) Your are Done! Enjoy the Game and if you like buy it
_____________________________________________________________________________
Here a small HowTo, how you crack DayZ Client Files with SmartSteamEmu 1.4.1
1. Unpack SmartSteamEmu folder in the Main Game Directory.
2. Edit Path parameters if needed in "!Start_client_parameters.ini", look below at Important Notes for Examples!
3. Edit parameter "CommandLine", found in "!Start_client_parameters.ini" for your needs.
4. Also Check the bat "!Start_client_game" open with Editor/Notepad++ and it should look like this:
start "" "SmartSteamEmu\SmartSteamLoader.exe" !Start_client_parameters.ini
5. Start the Game via bat file called !Start_client_game.cmd.
6. Connect to a Server and Enjoy a good time with you friends!
-|:IMPORTANT NOTES:|-
-Edit correct Game Path:
If you want that the Game starts correctly, you have to adjust the path according to your needs.
This is done in this files: "!Start_client_parameters.ini"
The Path should be the like the same where you saved the Game Files, if you saved it in your Steam Folder it should look like this:
Example:
Target = D:\Steam\steamapps\common\DZ_SA_061\DayZServer_x64.exe
StartIn = D:\Steam\steamapps\common\DZ_SA_061\
SteamClientPath = D:\Steam\steamapps\common\DZ_SA_061\SmartSteamEmu\SmartSteamEmu.dll
SteamClientPath64 = D:\Steam\steamapps\common\DZ_SA_061\SmartSteamEmu\SmartSteamEmu64.dll
Regards Ace