[B]How to get EP3.0 or EP3.2 Admin-Tool to work[/B]

[WARonline]

How to get EP3.0 or EP3.2 Admin-Tool to work
1.) After downloading Derivative-AdminTool (Click here for thread) open the file using PE Explorer and Save it, without doing anything.
2.) Open the saved file using a Hex-Editor.
3.) Go to Position "FF810". There you find your XOR-Code!
4.) Now copy all Chars until you reach '.Saturday'
5.) Start your Adminclient (without exiting your Hex-Editor) and click on "SC Encrytion".
6.) In the first field enter your IP, username and last your password using the key you found in step 4 in the second input.
7.) Now go to Position "FB13C".
8.) The result you get you have to enter in Hex-Editor now.
9.) Enter your XORed IP-Adress on this position overwriting the value before. If your XORed Ip-Adress should be smaller than the value before you have to set this left chars to "00".
10.) After some points you see the next value, this is the IP-Adress again. Enter the same way you did before.
11.) There is a little "break" between the rows of points and this two chars are your Port. Now open Calc and type in your Port, convert it to hex and if you would get: AB12, you have to put 12AB in Hex instead of this two chars.
12.) Here you have to enter your XORed Username of Database.
13.) Some points later - again - you have to enter the XORed Password.
14.) Save & Enjoy.

I hope my English isn't too bad and you understand what I mean
If there is something thats too hard to unterstand, just post here.

Thanks to PanKJ helping me understand basics of exe and helping me, too

Ok... guyz...for 3.0 or 3.2 if u use this for the admin tool of X-rivals files u have it in extra folder, and if u make it exactlly as is saying up, will work.

But i got a problem now...
Why the admin tool is trying to connect to 192.168.10.13:1433

Cuze i know it MUST BE ON 9979... how do i change the port 1433 in to 9979

My server is running on 9979 and also in SQL Server Configuration Manager i got 9979

The problem is how do i change on Hexing the Admin tool the port 1433 in to 9979... or other ideas please ?

THX.:huh:


Dark.

 

[Renaissance]

11.) There is a little "break" between the rows of points and this two chars are your Port. Now open Calc and type in your Port, convert it to hex and if you would get: AB12, you have to put 12AB in Hex instead of this two chars.

Some lines after your IP-Adress you will find: 99 05 I think, not sure now.
Now put FB26 there, and it will work.

 

[WARonline]

FB26 means this ¨2O.ø„2O.ø\2O.ø02O.ø.2O.øÐ1O.ø


What to do with the doc ?

the error is " Database atum2_db_1(192.168.10.13:1433) cannot be connected "

and as i said...all the server is working on 9979.... and the admin is trying on port 1433 as u can see in the error... i need to change 1433 in to 9979.

Can some1 tell me how to change it?


I found this in PreServer...which means it's ok the configs... but only the port is the problem..

Pre.cfg
10-01 14:17:50| [Notify] CheckAllowedToolIP ==> Allowed (192.168.10.13)
10-01 14:17:50|[Notify] SCAdminTool connected !!, AccountName(darkmandos) IP(192.168.10.13) AccountType(128)
10-01 14:18:07|Socket Closed SocketIndex[ 16] SocketType[8] PeerIP[ 192.168.10.13] Port[63321] MaxWriteBufCounts[ 1] ==> reason 6[0X000006]


OR.... can some1 give to me a non configured AdminTool for 3.0 or 3.2 that has the port 9979?

This is all i need... i will configure myself.

Thank you.

 

[jison]

Some lines after your IP-Adress you will find: 99 05 I think, not sure now.
Now put FB26 there, and it will work.

Can you or some one can give me the lines exactly .

 

[WARonline]

The Block is correct at least ?

 

[WARonline]

I see that no1 knows...

 

[killburne]

Here i attach an ep3.2 admin tool with IP: 127.0.0.1, PORT: 9979, ID: atum and PW: callweb

download it and have fun.

 

[WARonline]

Ok thank you killburne... its working all the Managements exept the "User Management"
So when i enter again the password is not even loading... as i said the rest are working perfect... what should be the problem ? i use the admin tool from killburne that he put it here... thx mate.

Thank you for respond.

 

[killburne]

i don´t know, because for me it´s working.

 

[WARonline]

Ok...any clues about this error in PreSystem log ?

10-02 20:38:36| [Notify] CheckAllowedToolIP ==> Allowed (192.168.10.13)
10-02 20:38:36|[Notify] SCAdminTool connected !!, AccountName(domino) IP(192.168.10.13) AccountType(128)
10-02 20:42:09|Socket Closed SocketIndex[ 12] SocketType[8] PeerIP[ 192.168.10.13] Port[57075] MaxWriteBufCounts[ 1] ==> reason 6[0X000006]

This is the error when i enter the 2nd password in to User Management.

10-02 20:42:09|Socket Closed SocketIndex[ 12] SocketType[8] PeerIP[ 192.168.10.13] Port[57075] MaxWriteBufCounts[ 1] ==> reason 6[0X000006]

The rest work perfectlly...

 

[WARonline]

Anyone knows about that error ? look little up please. thank you.

 

[WARonline]

PanKJ men, GigaByte.... u guyz must know how to fix this problem...

Please tell me what i have to do so User Management to work.


The thing is ... is not giving even (Not responding) is not loading the User Management. the rest works perfectly...

I hope some1 has a clue..

Thank you.

 

[WARonline]

Come on some1 to give ideas...

Thank you...

 

[waracelz]

Here i attach an ep3.2 admin tool with IP: 127.0.0.1, PORT: 9979, ID: atum and PW: callweb

download it and have fun.

thanks you!!