Good night 
I'm having the following problem when trying to log into the server.
TCP view shows me SYN_SENT status on port 27780.
When editing the Launcher (RF Play) I changed all IP's for WAN access, did the port forwarding settings on my equipment. :8:
I found two ports on the RF Launcher:
Not altered the 27780 and 10001 ports on the launcher, there is a guide in the forum, which makes reference to exchange all ports 27780 to 10001 I tested but the error remains.
In the emulator, set up the HTTP files and rf-server to the IP of the host machine (db, account, login and MSSQL) and other files: update.dll, * .txt, * .dat, LPServer configured the IP WAN.
What am I forgetting? :$: and sorry about my english :blush:
I'm having the following problem when trying to log into the server.
TCP view shows me SYN_SENT status on port 27780.
You must be registered to see links
When editing the Launcher (RF Play) I changed all IP's for WAN access, did the port forwarding settings on my equipment. :8:
I found two ports on the RF Launcher:
http: //%s/update.dll 0..http: //% s:% s / update.dll 0 ... 85..80..8080 .... and
Launcher Patch ServerIP:% s .... 83..82 ..
without editing these lines my launcher opens but then closes, so I put their eg doors: 8080 and 80 and launcher works, but the errors remains.
Launcher Patch ServerIP:% s .... 83..82 ..
without editing these lines my launcher opens but then closes, so I put their eg doors: 8080 and 80 and launcher works, but the errors remains.
In the emulator, set up the HTTP files and rf-server to the IP of the host machine (db, account, login and MSSQL) and other files: update.dll, * .txt, * .dat, LPServer configured the IP WAN.
What am I forgetting? :$: and sorry about my english :blush:
