Originally Posted by adastmin
good……
good……
Last edited by nowayna; 08-06-22 at 09:20 AM.
That would be great. Thanks so much!
Does anyone have a central market?
yes,i do.
@adastmin do you have fixed your problem?
So i did an experiment, can you run the Server with 16 gigs of Ram, well basically yes you can but there is a catch.
I set all the rates to vanilla and leveled up by normal playing from 1 to 58, catched a few horses the vanilla way, did gathering, crafting.
The problems you will encounter are some delays for questing, shops, klicking skills to learn in the skill menu, of course mob AI and you need to sacrifice an SSD for Windows Pagefile (Swap). Most of these delays are somewhat random, sometimes no delays, sometimes 2 seconds, and in very rare cases when the server is in a busy state somewhat longer. Only thing that was really bad are those quests where you need to summon a Boss and kill it.
That can really take some time until it registers attackable. Your skills on normal mobs register just fine, sometimes there is one mob that just ignores whatever you do, but that does not really matter as it often enough suddenly registers and dies or resets. If the Server is in a busy state and you move to fast the server will catch you for speedhacking and teleports you back, quite funny.
If you wanna try this keep in mind that you need to sacrifice an SSD. A normal SATA one worked for me, if you have an NVME, try that but keep in mind there will be heavy read/writes all the time while the server is running.
You also need to set the Pagefile to a fixed size in Windows or the Server will crash on startup as Windows is not increasing the Pagefile fast enough by itself. I set mine to a fixed min and max of 240 gigs.
My VM is a Windows Server 2019, 16 gig Ram, 4 CPU cores (4,57 ghz).
These are my settings in 'DataSheet_Server'
Table 'CanServiceOption'
Table 'ApplicationServiceOption'
In the file 'DataSheet_ContentsOptions' Table 'LocalizingOption'
search for '%CpuBusyRate' and set it to 99 or even 100 for NA
The Server will stop sending some stuff to the client if the CPU is loaded higher then the specifed value, maybe 0 will disable that, not tested, 99 works for me just fine.
When you then boot up the server the normal way you would do and when the field server has loaded you need to have an eye for the title bar:
There is a part where it says 'Queue' if that goes up your delay will get longer and longer, you should allocate enough threads for the field server so it can do all the needed things. To much threads and your CPU will melt as this server can also get very CPU intensive, not enough and your Queue will build up and never go down again which makes it completely unplayable. Thread allocation is in the 'DataSheet_Server' Table 'CanServiceOption' in the picture of the table above you see in Row 4 the Numbers (22/14/14/3/30000/1/12), in my current testrun i changed the numbers to (18/14/14/3/30000/2/14)
So U say that you's version of settings eat less RAM then exists?
When all the three servers are booted up Windows will show a pagefile usage of 124 gigs and that is with all three servers always up. It will go up and down 1 or 2 gigs sometimes but mostly it was staying around that value. When you start closing the servers with CTRL + C then it can spike up to 220 gigs for a brief moment before the server shuts down.
Last edited by seramyu; 23-06-22 at 01:24 PM. Reason: typos
Good can U share this settings files only?
The settings are easy. Just update the spreadsheets as he has shown you in the 1st post.
for THIS does U download working with Nova 3205 steam client and can share it via .torrent?
I have put together the 3205 .paz files that match the 3205 server. These have been created using a close match client downloaded from steam. These ARE NOT based directly on the paz files distributed with the current 3205 client. You must replace the contents of the \paz directory with this one to properly match with the server.
You can download it here (sorry no torrent)
https://drive.google.com/file/d/1EaN...ew?usp=sharing
You will need this password to extract it
Spoiler:
Note: These are just the .paz files. You will have to get the full 3205 client on your own. It can be found via many sources.
So me take your's settings and... all parts of server eats ~112Gb - very good then ~148Gb before, but CPU - 2/4 cores fully used all time.So i did an experiment, can you run the Server with 16 gigs of Ram, well basically yes you can but there is a catch.
I set all the rates to vanilla and leveled up by normal playing from 1 to 58, catched a few horses the vanilla way, did gathering, crafting.
The problems you will encounter are some delays for questing, shops, klicking skills to learn in the skill menu, of course mob AI and you need to sacrifice an SSD for Windows Pagefile (Swap). Most of these delays are somewhat random, sometimes no delays, sometimes 2 seconds, and in very rare cases when the server is in a busy state somewhat longer. Only thing that was really bad are those quests where you need to summon a Boss and kill it.
That can really take some time until it registers attackable. Your skills on normal mobs register just fine, sometimes there is one mob that just ignores whatever you do, but that does not really matter as it often enough suddenly registers and dies or resets. If the Server is in a busy state and you move to fast the server will catch you for speedhacking and teleports you back, quite funny.
If you wanna try this keep in mind that you need to sacrifice an SSD. A normal SATA one worked for me, if you have an NVME, try that but keep in mind there will be heavy read/writes all the time while the server is running.
You also need to set the Pagefile to a fixed size in Windows or the Server will crash on startup as Windows is not increasing the Pagefile fast enough by itself. I set mine to a fixed min and max of 240 gigs.
My VM is a Windows Server 2019, 16 gig Ram, 4 CPU cores (4,57 ghz).
These are my settings in 'DataSheet_Server'
Table 'CanServiceOption'
Table 'ApplicationServiceOption'
In the file 'DataSheet_ContentsOptions' Table 'LocalizingOption'
search for '%CpuBusyRate' and set it to 99 or even 100 for NA
The Server will stop sending some stuff to the client if the CPU is loaded higher then the specifed value, maybe 0 will disable that, not tested, 99 works for me just fine.
When you then boot up the server the normal way you would do and when the field server has loaded you need to have an eye for the title bar:
There is a part where it says 'Queue' if that goes up your delay will get longer and longer, you should allocate enough threads for the field server so it can do all the needed things. To much threads and your CPU will melt as this server can also get very CPU intensive, not enough and your Queue will build up and never go down again which makes it completely unplayable. Thread allocation is in the 'DataSheet_Server' Table 'CanServiceOption' in the picture of the table above you see in Row 4 the Numbers (22/14/14/3/30000/1/12), in my current testrun i changed the numbers to (18/14/14/3/30000/2/14)
Problem Solved Error Don't matter.
Last edited by jacent; 08-07-22 at 12:30 AM.
Re: Nova 3205 server file + client
Greetings, can someone please help me with server configuring. I did everything according to the instructions but nothing comes out.
I used this files:
I did everything as on this video:
I started all the processes as needed:Tutorial video of how setup Nova files.
Enjoy
I used this client:
Problems I found:
1. I can't run "FakeAuth.cmd", after starting it immediately closes, but if run directly via "fakeauth.py" it works.
2. When trying to connect to the server, the client gives an error: "Failed to connect."
I will be very grateful to you if you can help me. I have no idea what I'm doing wrong.
Last edited by Toster89; 11-07-22 at 04:05 AM.
Reply With Quote
