Printable View
Yes when you decompile System.mrs it just makes a Folder for all the files inside of System.mrs. When you Decompile a file make sure you click and drag the original Mrs onto your Desktop as a Backup, after you Compile the folder delete the Folder so that all that's left is System.mrs and no System folder.
Okay, the launcher works now, there are no channels though, do I need to create one or something?
Go into your Matchserver folder and post what your Channel.xml says
Code:
<?xml version="1.0" encoding="UTF-8" ?>
<XML id="channel">
<DEFAULTCHANNELNAME name="STR:CHANNEL_DEFAULT_NAME"/>
<DEFAULTRULENAME name="novice"/>
<CHANNEL name="STR:CHANNEL_NOVICE_NAME_1" maxplayers="200" rule="novice"/>
<CHANNEL name="STR:CHANNEL_NOVICE_NAME_2" maxplayers="200" rule="novice"/>
<CHANNEL name="STR:CHANNEL_NEWBIE_NAME_1" maxplayers="200" rule="newbie" levelmin='1' levelmax='10'/>
<CHANNEL name="STR:CHANNEL_NEWBIE_NAME_2" maxplayers="200" rule="newbie" levelmin='1' levelmax='10'/>
<CHANNEL name="STR:CHANNEL_NEWBIE_NAME_3" maxplayers="200" rule="newbie" levelmin='1' levelmax='10'/>
<CHANNEL name="STR:CHANNEL_ROOKIE_NAME_1" maxplayers="200" rule="rookie" levelmin='11' levelmax='20'/>
<CHANNEL name="STR:CHANNEL_ROOKIE_NAME_2" maxplayers="200" rule="rookie" levelmin='11' levelmax='20'/>
<CHANNEL name="STR:CHANNEL_MASTERY_NAME_1" maxplayers="200" rule="mastery" levelmin='21'/>
<CHANNEL name="STR:CHANNEL_MASTERY_NAME_2" maxplayers="200" rule="mastery" levelmin='21'/>
<CHANNEL name="STR:CHANNEL_ELITE_NAME_1" maxplayers="200" rule="elite" levelmin='35'/>
<CHANNEL name="STR:CHANNEL_ELITE_NAME_2" maxplayers="200" rule="elite" levelmin='35'/>
</XML>
Try using this Channel.xml, just replace the Channel Name with w.e you want it to be.
Code:<?xml version="1.0" encoding="UTF-8" ?>
<XML id="channel">
<DEFAULTCHANNELNAME name="STR:Canal 1"/>
<DEFAULTRULENAME name="elite"/>
<CHANNEL name="Free Channel 1" maxplayers="200" rule="elite"/>
<CHANNEL name="Free Channel 2" maxplayers="200" rule="elite"/>
<CHANNEL name="Event Channel" maxplayers="200" rule="elite"/>
<CHANNEL name="Staff Channel" maxplayers="200" rule="elite" levelmin='2' levelmax="1"/>
</XML>
Still no servers to log into
EDIT : IF you thought I meant ingame channels, then no, I meant the servers that you login to like the "North America Server 500/1000" That was an example
Oh, well in that case post your Locator.ini, AgentConfig.xml and Server.ini. Also make sure you have everything edited right in your SQL (ServerStatus.dbo etc.) And since you're using your WAN IP instead of Localhost make sure that you've Port-Forwarded correctly.
Code:[DB]
DNS="GunzDB"
USERNAME="sa"
PASSWORD="sa"
[NETWORK]
IP="66.56.56.218"
PORT="8900"
[ENV]
ID="1"
LOCATOR_UID_HIGH="5"
LOCATOR_UID_LOW="0"
MAX_ELAPSED_UPDATE_SERVER_STATUS_TIME="1000"
UDP_LIVE_TIME="10000000"
MAX_FREE_RECV_COUNT_PER_LIVE_TIME="9"
BLOCK_TIME="0"
UPDATE_UDP_MANAGER_ELAPSED_TIME="3"
MARGIN_OF_ERROR_MIN="500000"
USE_COUNTRY_CODE_FILTER="no"
GMT_DIFF="-3"
ELAPSED_TIME_UPDATE_LOCATOR_LOG="3600000"
ELAPSED_TIME_UPDATE_LOCATOR_LOG="10000"
ELAPSED_TIME_UPDATE_COUNTRYCODEFILTER_LOG="10000"
UPDATE_COUNTRY_CODE="66 89 69 77 73 83 65 78 68"
TEST_SERVER="0"
Code:[DB]
DNS="GunzDB"
USERNAME="sa"
PASSWORD="sa"
[SERVER]
MAXUSER=500
SERVERID=1
SERVERNAME="MatchServer1"
FREELOGINIP="66.56.56.218"
KEEPERIP="66.56.56.218"
MONITORIP="127.0.0.1"
MONITORPORT=9000
MODE="test"
COUNTRY="BRZ"
LANGUAGE="BRZ"
USETICKET="0"
[LANGUAGE]
LANG_TYPE="eng"
[LOCALE]
DBAgentPort=5100
DBAgentIP=127.0.0.1
[FILTER]
USE="0"
ACCEPT_INVALID_IP="1"
[ENVIRONMENT]
USE_HSHIELD="0"
USE_XTRAP="0"
USE_EVENT="0"
USE_FILECRC="0"
USE_MD5="0"
Alright well change MatchServer1 to your Gunz name (Make sure it's the same one you put in ServerStatus.dbo) Also post your AgentConfig.xml and make sure your Ports are forwarded correctly.
Code:<?xml version="1.0" encoding="euc-kr"?>
<XML>
<AGENTCONFIG>
<NAME>MatchServer1</NAME>
<MAXCLIENT>200</MAXCLIENT>
<MATCHSERVERADDRESS ip="127.0.0.1" tcpport="6000"/>
<ADDRESS ip="66.56.56.218 (or NO-IP Address if you have a dynamic IP)" tcpport="7777" udpport="5100"/>
</AGENTCONFIG>
</XML>
---------- Post added at 12:14 AM ---------- Previous post was at 12:09 AM ----------
Check if I port forwarded correctly portforward.bmp
Alright change the MatchServer1 to the name of your GunZ (Make sure that every field that says NAME or Server Name or anything like that all have the same Name, including in your SQL) IP's are right, so are the Ports.. Hmm...
Download and run this to see if your ports are open, Open Port Check - PortForward.com
Also did you setup odbcad32 correctly?
If they are all open and it still doesn't work, and you have odbcad32 setup correctly, try changing every IP to Localhost (127.0.0.1) instead of your WAN. Make sure you have the TCP/IP Protocols turned on in MySQL Server Management Studio Express (It will be under the same tab as Microsoft SQL Server 2005 in your Startup>Accessories)
If it still isn't working I don't know what else to tell you besides maybe tomorrow I could set everything up for you over Teamviewer. But so far everything is correct according to my knowledge and all the Tutorial's. I think you might have the same problem as I did a while back, Port's are all forwarded right and are open, everything else is setup but still no server. If that's the case it's a problem with your Router, I had to order a new Router that I was 100% sure was completely compatible with running a server, and now it works.
Well, for some reason my ODBC won't open... When you ODBC it does it have to be with the changed "MatchServer1"?
EDIT : I just checked all the ports, said they were port forwarded correctly..
EDIT EDIT : Now, when I try to login to MYSQL I getCode:"A network or related or instance-specific error occured while establishing a connection to SQL Server. The server was not found or accessible. Verify that instance name is correct and that SQL Server is configured to allow remote connections.(provider: Shared Memory Provider, error:40
Could not open a connection to SQL Server)(Microsoft SQL Server, Error: 2
Hmm, I'm not sure why odbcad won't open, I've never had problems with it.. For the MySQL problem click Options within the Login panel and make sure the Protocol is TCP/IP and in your Microsoft SQL Server Management Studio Express make sure that the TCP/IP Protocol is set as Running
How do I set the TCP/IP Protocol to running? Still getting error, also I finally got ODBC to open, after running as adminstrator.
Alright did you follow the tutorial in the GunZ Server Tut on how to set odbcad up? Well I don't have anything related to SQL installed on my computer so I'm just going from vague memory here, but there are 2 places that you need to change. In the Login panel for MySQL click Options, and there should be a couple drop-down options. If I remember it's under the "Protocol" Tab you click the Drop-Down and select TCP/IP. After that go to Start > Accessories > Your SQL Tab > Microsoft SQL Server Studio Management Express (I think, I can't remember the exact name) but it's under Microsoft SQL Server 2005 or w.e after that it should take a couple seconds to load and you should see like 4 or 5 different uh, 'rows' I guess. But they'll say TCP/IP and a couple others, right click each one and make sure they are set to running. If that's not correct then you'll have to wait until I install SQL stuff onto my CPU so I can make sure what I'm saying is 100% correct but as of now I'm just going by Vague memory.