[help] ppl cant log into my server..plz..
ok so that is the prob
i CAN conect to my server but other ppl cant.
i have a router and i dunno what ports to open...here is my files...
realms.conf
ascent.confCode:################################################## ##################### # Realms Configuration File # Last updated at revision 1259 ################################################## ##################### # Logon Server Setup # # Logon servers are the old "realmlist" or "auth" servers. # At the moment, you can only set up one. This will be changed in the # future. # # LogonServerCount = Number of servers # LogonServer[x].Address = The address (no port) of the server. # LogonServer[x].Port = The port on which the logon server listens. # LogonServer[x].Name = Not really relavant, but name the logon. # LogonServerCount = 1 LogonServer1.Address = "10.0.0.7" LogonServer1.Port = 8093 LogonServer1.Name = "Default Logon" # Realm Setup # # This is the realms that will be added to the list for this instance # of the server. You can have multiple realms (e.g. one for LAN, WAN). # # RealmCount = The number of servers. # Realm[x].Name = The name of the realm. # Realm[x].Address = The address (and port) of that realm. # Realm[x].Icon = The type of realm (PVP, Normal, RPPVP, RP) # Realm[x].Colour = Realm colour in realm list display. # Realm[x].TimeZone = Time zone the realm is in. # Realm[x].Population = (0 = low, 1 = medium, 2 = high) # RealmCount = 1 Realm1.Name = "hellwow pvp server" Realm1.Address = "80.178.61.3:8129" Realm1.Icon = "PVP" Realm1.Colour = 1 Realm1.Population = 1.0 Realm1.TimeZone = 1
logonserver.confCode:####################################################################### # Ascent Configuration File # Last updated at revision 880 by Burlex ####################################################################### /******************************************************************************** * How to use this config file: * * Config files are in a block->variable->setting format. * * A < signifies the opening of a block, the block name is expected after that. * * After the block name, a space and then the settings sperated by = / ' '. * * * * e.g. * * <block setting="0" someval = "1"> * * * * Comments can be in C format, e.g. /* some stuff */, with a // at the start * * of the line, or in shell format (#). * ********************************************************************************/ #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Database Section # # Database.Host - The hostname that the database is located on # Database.Username - The username used for the mysql connection # Database.Password - The password used for the mysql connection # Database.Name - The database name # Database.Port - Port that MySQL listens on. Usually 3306. # Database.Type - Client to use. 1 = MySQL, 2 = PostgreSQL, 3 = Oracle 10g # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# <WorldDatabase Hostname = "localhost" Username = "root" Password = "11223344" Name = "antrix" Port = "3306" Type = "1"> <CharacterDatabase Hostname = "localhost" Username = "root" Password = "11223344" Name = "antrix" Port = "3306" Type = "1"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Listen Config # # Host # This is the address that the server will listen on. # To listen on all addresses, set it to 0.0.0.0 # Default: 127.0.0.1 (localhost) # # WorldServerPort # This is the port that the world server listens on. # It has to be the same as what is specified in the # realms table in the LogonDatabase. # Default: 8129 # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# <Listen Host = "0.0.0.0" WorldServerPort = "8129"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Log Level Setup # # Console Logging Level # This directive controls how much output the server will # display in it's console. Set to 0 for none, or -1 to disable. # -1 = Disabled; 0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug # Default: 3 # # World server packet logging feature # If this directive is turned on, a file called `world.log` # will be created in the server's directory and all packets # sent and received by clients will be dumped here in bfg # format. # Default: 0 # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# <LogLevel Screen="0" File="-1" World="0"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Server Settings # # PlayerLimit # This directive controls the amount of sessions that will be # accepted by the server before it starts to add people to # the server queue. # Default: 100 # # PlrUpdateDistance # This directive controls the distance (internal yards) that the player can "see" up to # and receieve updates for. For smaller servers, you can probably increase this number. # Increasing this number will also increase the servers bandwidth consumption and CPU usage. # Default: 80 # # Motd # This message will be displayed by the server in the chat # box every time any user logs on. Colors can be used in the # standard WoW format. # Default: "No MOTD specified # # Send Build On Join # This directive controls whether the server's internal revision # will be sent to clients upon entering the world. Use it to help # testers report bugs. # # Send Stats On Join # This directive controls whether the server will send the online player # count to a cilent when it enters the world. # # Breathing Setup # If the breathing code is causing problems or you want to run a fun server, you can disable # water checks by enabling this directive. # Default: 1 # # Speedhack detection # If this directive is turned on, speedhack detection will be activated and speedhackers # will be warned / kicked. # Default: 0 # # Level Cap # This variable controls the level that stats will be generated up to internally. # Beyond this level players can still see a higher level visually but their stats won't # increase beyond this point. # Default: 60 # # Expansion 1 Level Cap # This variable does the same thing as Level Cap above, except it applies to those who # have the first expansion: The Burning Crusade. # Default: 70 # # Seperate Channels Control # This directive controls whether horde and alliance chats will be seperated across channels. # Set to 1 for blizzlike seperated channels, or 0 to allow horde/alliance to speak to each other # across channels. # Default: 0 # # Compression Threshold # This directive controls the limit when update packets will be compressed using deflate. # For lower-bandwidth servers use a lower value at the cost of cpu time. # Default: 1000 # # Queue Update Rate # This directive controls how many milliseconds (ms) between the updates # that the queued players receieve telling them their position in the queue. # Default: 5000 (5 seconds). # # Kick AFK Players # Time in milliseconds (ms) that a player will be kicked after they go afk. # Default: 0 (disabled) # # Connection Timeout # This directive specifies the amount of seconds that the client will be disconnected # after if no ping packet is sent. It is advised to leave it at the default. # Default: 180 # # Realm Type # This is the realm type that will be used by the server to handle world pvp. # Default: 0 (pve)(RPPVE) # Other values: 1(pvp)(RPPVP) # # AdjustPriority # Set the server to high process priority? # Default: 0 # # RequireAllSignatures # This directive controls whether the full 10 signatures will be required in order # to turn in a petition. Smaller servers would be better off having it turned off. # Default: off # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# <Server PlayerLimit = "50" PlrUpdateDistance = "80" Motd = "Welcome!" SendBuildOnJoin = "1" SendStatsOnJoin = "1" EnableBreathing = "1" SpeedhackProtection = "0" LevelCap = "60" Expansion1LevelCap = "70" SeperateChatChannels = "0" CompressionThreshold = "1000" QueueUpdateInterval = "5000" KickAFKPlayers = "0" ConnectionTimeout = "180" RealmType = "1" AdjustPriority = "0" RequireAllSignatures = "0"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Die Directive # # If this triggers it means you didn't read your config file! # Just comment it or remove it when you've read this. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Power regeneration multiplier setup # # These directives set up the multiplier in which regen values will be # multiplied by every 2 seconds. # Powers: # Power1 = Mana, Power2 = Rage, Power3 = Energy # # Reputation: # Kill = Rep gained on kill, Quest = rep gained from quests # # Honor: # Honor = multiplier used to calculate honor per-kill. # # PvP: # PvPTimer = in ms, the timeout for pvp after turning it off. default: 5mins (300000) # # XP: # The xp that a player receives from killing a creature will be multiplied # by this value in order to get his xp gain. # # RestXP: # Value is the amount of rest XP a player will recieve per minute of rest time. # # Drop: # This value will be multiplied by any gold looted and the drop percentages of the # items for creatures will also be multiplied for this to determine which items # to drop. # # Save: # Value in milliseconds (ms) that will be between player autosaves. # Default: 300000 (5 minutes) # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# <Rates Health="3" Power1="5" Power2="5" Power3="5" QuestReputation="2" KillReputation="2" Honor="2" PvPTimer="300000" Compression="1" XP="500000" QuestXP="500000" RestXP="500000" Drop="60" DropMoney="30" Save="300000"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # GM Client Channel # # This should be set to 'gm_sync_channel' for the My_Master addon to work. # # Default: gm_sync_channel # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# <GMClient ReqGmClient = "0" GmClientChannel = "gm_sync_channel"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Terrain Configuration # # Set the path to the map_xx.bin files and whether unloading should be enabled # for the main world maps here. Unloading the main world maps when they go idle # can save a great amount of memory if the cells aren't being activated/idled # often. Instance/Non-main maps will not be unloaded ever. # # Default: # MapPath = "maps" # UnloadMaps = 1 # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# <Terrain MapPath = "maps" UnloadMaps = "1"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Log Settings # # Cheaters: # This directive sets up the cheater logging file, if turned on any # cheat / packet exploit / speedhack attempts will be logged here. # # GMCommands: # These two directives set up the GM command logging fie. If turned on, # most gm commands will be logged for this file for abuse investigation, etc. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# <Log Cheaters="0" GMCommands="0"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Mail System Setup # # These directives control the limits and behaviour of the ingame mail system. # All options must have Mail prefixed before them. # # ReloadDelay # Controls the delay at which the database is "refreshed". Use it if you're # inserting mail from an external source, such as a web-based interface. # 0 turns it off. # Default: 0 # # DisablePostageCostsForGM # Enables/disables the postage costs for GM's. DisablePostageCosts overrides this. # Default: 1 # # DisablePostageCosts # Disables postage costs for all players. # Default: 0 # # DisablePostageDelayItems # Disables the one hour wait time when sending mail with items attached. # Default: 1 # # DisableMessageExpiry # Turns off the 30 day / 3 day after read message expiry time. # WARNING: A mailbox still cannot show more than 50 items at once # (stupid limitation in client). # Default: 0 # # EnableInterfactionMail # Removes the faction limitation for sending mail messages. Applies to all players. # Default: 1 # # EnableInterfactionMailForGM # Removes the faction limitation for sending mail messages, but only applies # to GM's. EnableInterfactionMail overrides this. # Default: 1 # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# <Mail ReloadDelay="0" DisablePostageCostsForGM="1" DisablePostageCosts="0" DisablePostageDelayItems="1" DisableMessageExpiry="0" EnableInterfactionMail="1" EnableInterfactionMailForGM="1"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Status Dumper Config # # These directives set up the status dumper plugin. Filename is an # absolute or relative path to the server binary. Interval is the # time that the stats will be dumped to xml. # Default: stats.xml / 120000 (2 minutes) # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# <StatDumper FileName = "stats.xml" Interval = "120000"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Startup Options # # Preloading # This directive controls whether the entire world will be spawned at server # startup or on demand. It is advised to leave it disabled unless you are a # developer doing testing. # Default: off # # Background Loot Loading # This directive controls whether loot will be loaded progressively during # startup or in the background in a seperate thread. Turning it on will # result in much faster startup times. # Default: on # # Multithreaded Startup # This controls whether the server will spawn multiple worker threads to # use for loading the database and starting the server. Turning it on # increases the speed at which it starts up for each additional cpu in your # computer. # Default: on # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# <Startup Preloading = "0" BackgroundLootLoading = "1" EnableMultithreadedLoading = "1"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Flood Protection Setup # # Lines # This is the number of "messages" or lines that it will allow before stopping messages from # being sent. This counter is reset every "Seconds" seconds. # Default: 0 (disabled) # # Seconds # This is the number of seconds inbetween the Line counter being reset. # Default: 0 (disabled) # # SendMessage # If this is enabled, a "Your message has triggered serverside flood protection. You can speak again in %u seconds." # message will be sent upon flood triggering. # Default: 0 # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# <FloodProtection Lines = "0" Seconds = "0" SendMessage = "0"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # LogonServer Setup # # DisablePings # This directive controls whether pings will be sent to the logonserver to check # if the connection is still "alive". Expect problems if it is disabled. # Default: 0 # # RemotePassword # This directive controls the password used to authenticate with the logonserver. # It must be the same between the two configs. If it is not, your server will # not register. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# <LogonServer DisablePings = "0" RemotePassword = "11223344"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Die Directive # # If this triggers it means you didn't read your config file! # Just comment it or remove it when you've read this. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
what is wrong???Code:####################################################################### # Ascent Realms Configuration File # Last updated at revision 446 by Burlex ####################################################################### /******************************************************************************** * How to use this config file: * * Config files are in a block->variable->setting format. * * A < signifies the opening of a block, the block name is expected after that. * * After the block name, a space and then the settings sperated by = / ' '. * * * * e.g. * * <block setting="0" someval = "1"> * * * * Comments can be in C format, e.g. /* some stuff */, with a // at the start * * of the line, or in shell format (#). * ********************************************************************************/ # LogonDatabase Section # # These directives are the location of the `realms` and `accounts` # tables. # # LogonDatabase.Host - The hostname that the database is located on # LogonDatabase.Username - The username used for the mysql connection # LogonDatabase.Password - The password used for the mysql connection # LogonDatabase.Name - The database name # LogonDatabase.Port - Port that MySQL listens on. Usually 3306. # LogonDatabase.Type - Client to use. 1 = MySQL, 2 = PostgreSQL, 3 = Oracle 10g # <LogonDatabase Hostname = "localhost" Username = "root" Password = "11223344" Name = "antrix" Port = "3306" Type = "1"> # Host Directive # # This is the address that the realmlist will listen on. # To listen on all addresses, set it to 0.0.0.0 # Default: 127.0.0.1 (localhost) # # Note: ISHost is the interserver communication listener. # <Listen Host = "0.0.0.0" ISHost = "0.0.0.0" RealmListPort = "3724" ServerPort = "8093"> # Server console logging level # # This directive controls how much output the server will # display in it's console. Set to 0 for none. # 0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug # Default: 3 # <LogLevel Screen = "0" File = "-1"> # Account Refresh Time # # This controls on which time interval accounts gets # refreshed. (In seconds) # Default = 600 # <Rates AccountRefresh = "600"> # Accepted Build Range Setup # # These two directives set up which clients will be # allowed to authenticate with the realm list. # # Set these to the same builds that the server was # compiled for. # # As of the last update, version 2.1.1 was build 6739. # <Client MinBuild = "6739" MaxBuild = "6898"> # WorldServer Setup # # This directive controls the password used to authenticate with the worldserver. # It must be the same between the two configs. If it is not, your server will # not register. # # Default: "change_me_logon" # <LogonServer RemotePassword = "11223344">
i opened the port 8129 tcp/udp tcp udp
???
Reply With Quote![[help] ppl cant log into my server..plz..](http://ragezone.com/hyper728.png)
Originally Posted by Darkj
