Kobold (ludmilla) Setup Guide v0.4

command is .mod item <iD>

id's can be found on Allakhazam.com: World of Warcraft

Quote:

---

Thanks Alizee,

I think I have found the issue. I do not have skillline.dbc in my dbc folder. Any idea why the extrator would have missed it? I have tried it again but no luck, if i can find where its extracting from it might help.


--------------------------------------------------------------------------------

Regards
Highlord

---

dude get my dbc.rar good and very well working
http://forum.ragezone.com/world-warc...eb-180964.html
u can find there usefull stuff too

Alizee your the don!! Works a treat now to test the new setup :)

:D thx ! :P

i have two questions.
I have changed the 'XP_MAXPLAYERLVL' to 255 in the config.py and cleaned all the pyc files. but i still can't get the character's level higher than 60 in the game.

Also i don't now how to manipulate the spell's damage, duration or anything. I've looked into the py files and sql database and can't find where these data are stored.

Can anyone give some hints? thanks.

Quote:

---

Originally Posted by luw

i have two questions.
I have changed the 'XP_MAXPLAYERLVL' to 255 in the config.py and cleaned all the pyc files. but i still can't get the character's level higher than 60 in the game.

Also i don't now how to manipulate the spell's damage, duration or anything. I've looked into the py files and sql database and can't find where these data are stored.

Can anyone give some hints? thanks.

---

I'd like to know also. Same modification, no change.

Is there any file with all commands and exampels.

And how do i add skill trainers for all classes?

I have to say, all in all when i do this setup first then do Alizee's guide, i get the best results. Unfortunately, i still can't seem to make it so people can connect to my server. I've tried putting my WAN ip in the realm_list table and the worldserver_list with no success. I've tried putting my WAN ip in the conf files for all 3 servers, with no success except MySQL allowing remote root commands. Is there anyone else having problems with networking in this setup?

how far do people get when they try to connect to your server? Just to realm selection and it says its offline?

I had that problem also, but fixed it by changing the status column in the realm_list table with Navicat. It was set to 3, I set it to 1 and now it works fine. Also set your WAN IP in the realm_list and worldserver_list tables.

Check if remote users can see your WAN ip.

Then you need to check if your server is behind any kind of firewall and allow it to be accessible from the internet.

Its hard to guide you as everyone has a different setup but I will give my test rig as an example.

I have a hardware firewall sitting between my test network and the internet. This is connected to a router that handles my test network (like working out what traffic goes to which machine etc).

I also have a DNS server that tells the internet how to find one of my servers and I have configured my firewall (opened up some ports and added redirection) so that any traffic going to one of my wan IP adresses e.g. 212.12.34.202 will get routed to my Emu server.

If you have a dynamic IP i.e. it gets changed by your ISP each time you log in then you need to use some kind of DynamicDNS service like dyndns.com etc.

You register your WAN ip with them and then they take care of the DNS for your network. Setup a DNS name for your WAN IP and tell people to point their machines to that DNS name.

On the server you would probably use a Dynamic DNS updater program (quite a few free ones on the internet); they simply run in the background on your server and look for changes in your IP address, as soon as the WAN IP has changed they updated the DynamicDNS hosting service so people will still see your server.

Send me a PM describing how your network is setup and I might be able to guide you to getting your server online.

Thanks,

Fz

How to change Maxlvl, item droprate and xp??? thankz. nice repack :D

Quote:

---

Originally Posted by finalzero

Check if remote users can see your WAN ip.

Then you need to check if your server is behind any kind of firewall and allow it to be accessible from the internet.

Its hard to guide you as everyone has a different setup but I will give my test rig as an example.

I have a hardware firewall sitting between my test network and the internet. This is connected to a router that handles my test network (like working out what traffic goes to which machine etc).

I also have a DNS server that tells the internet how to find one of my servers and I have configured my firewall (opened up some ports and added redirection) so that any traffic going to one of my wan IP adresses e.g. 212.12.34.202 will get routed to my Emu server.

If you have a dynamic IP i.e. it gets changed by your ISP each time you log in then you need to use some kind of DynamicDNS service like dyndns.com etc.

You register your WAN ip with them and then they take care of the DNS for your network. Setup a DNS name for your WAN IP and tell people to point their machines to that DNS name.

On the server you would probably use a Dynamic DNS updater program (quite a few free ones on the internet); they simply run in the background on your server and look for changes in your IP address, as soon as the WAN IP has changed they updated the DynamicDNS hosting service so people will still see your server.

Send me a PM describing how your network is setup and I might be able to guide you to getting your server online.

Thanks,

Fz

---

Yeah, i have port forwarding looking for traffic on ports 4200, 8085, and 3724. My friends can hit the port on the machine. We've even managed to establish Netcat connections to it from outside the router. I've even put the target Machine IP as DMZ, all with no luck. When my friend connects, the login status just sits on "Connecting" and never really does anything. When i look in the World Server window, i see his connection was accepted but that's about it. Then eventually my friend will get a "Disconnected by server." show up about 2 minutes after the "Connecting" dialog. It seems to me like MySQL doesn't mind authenticating for local users, but doesn't want to authenticate remote users.

Quote:

---

Originally Posted by warrior10

How to change Maxlvl, item droprate and xp??? thankz. nice repack :D

---

maxlvl and xp rate u can change it from luddy root/ws/scripst/config.py
but the drop rate and loot dunno for sure ....if someone knows pls post :)
thx

hi this prog works really fine but how can i kill the world bosses like Onyxia as gm . the command .npc kill works 0% how other command gaves .

dunno that yet! and i didn't saw anywhere an answer to that question

I'm getting one small problem. After i add Default to the reputation line and then go to execute the batch using file wow_server.sql I get this error.

[Err] 1101 - BLOB/TEXT column 'reputation' can't have a default value

A fast response as to how to fix this problem would really help.

Quote:

---

Originally Posted by Lacara

I'm getting one small problem. After i add Default to the reputation line and then go to execute the batch using file wow_server.sql I get this error.

[Err] 1101 - BLOB/TEXT column 'reputation' can't have a default value

A fast response as to how to fix this problem would really help.

---

STop STop STOp please hehe :console:

i had the same problem ,

But whit this one you are able to do every thing Right

Take the KENNY'S REPACK http://forum.ragezone.com/world-warc...ds-180964.html dont take the Laughing repack thing is not so good. and folow every step of the guide , you can olso juse the acoutn that are in the acoutn table so you can play a little with them :o) , and dont forgett to delete all of you MSQL en Navicat..

olso the Folders in your C:/programe files . Otherwise you get a mestup data tha wont work great beleive if you do it right , then youwil be playing :king: seeya

does any one know a program that helps u sort files like if the same line is duplicate to remove on of them
or how do i import some files to a database and overwrite the existing ones ...

Quote:

---

Originally Posted by kennythekid

maxlvl and xp rate u can change it from luddy root/ws/scripst/config.py
but the drop rate and loot dunno for sure ....if someone knows pls post :)
thx

---

thankz kenneythekid :)

17 14:23:40 W realm: this realm is put to InActive realms in DB
17 14:23:40 I RealmSrv: <<<-- Accepting client connections -->>>


i have set the realm_list status to 1 after i run RS_Server_Alive.bat it changes back to 3.. it`s driving me crazy pls help

press update record for me it works
and when u change it click on the left thingy that shows an arrow > this way
and then update record
if it doesn't work this way dunno how to do it other way!

i have a little question gave the new set items on this pack or n not?

Quote:

---

Originally Posted by jinx18

i have a little question gave the new set items on this pack or n not?

---

~67% Naxxramas items have this server

____________________________________________

Q: plx m8s now i need to now how i can make Dual-Wield =\ i done all trainers but i dont find skill me :( rogues sux without this skills , all players ( rogues ) crying :(

Hi, great post. Just wanted to say thanks for it ^^

I have used for this a translator I sit down my English

I have some problems with the servant to see if you can help me.

1&#186; when I activate the servant they leave me the following errors.

a)60 items can't be created by spell. update [items] DB!

2&#186; When I try to connect myself to the he/she tells me that

LogonSrv: Login failed...
auth: failed to auth client with error code[9]
~SocketHandler<> 027D9AE8
~Protocol: 027DC338
~Handler: 027D9AE8


Need help please.

Sh... came everyone in any high instanz really zul`gurub are closed naxxramas , ahn qui`rai doesn`t work .this are not opened?????