Force main.exe 1.04D to open Mu.exe. (ALREADY JNZ, YET NO Mu.exe CALL) (PICS)

**1337Wesley** · 22-07-17

So.. this is how my main is configured, but its not calling Mu.exe. Those values should be JE & JNZ as far as i have been reading. NOT JMP. Im confused in what to do.

I just open main.exe and it launches the game, not Updater.. I can upload the Main.exe so someone can config it for me, but i would love to learn.

Please help me or tell me what am i doing wrong or what i am not seeing.

**MentaL**

Force main.exe 1.04D to open Mu.exe. (ALREADY JNZ, YET NO Mu.exe CALL) (PICS)

**myheart** · 22-07-17

create dll to check mu.exe
if(open)
start main
else
close main

**1337Wesley** · 22-07-17

Originally Posted by myheart

create dll to check mu.exe
if(open)
start main
else
close main

I am very far of being a programmer or being able to do such thing. Can barely understand ollydbg. I wouldnt even be able to understand what to do with such dll sir. Thanks for the reply.

**myheart** · 22-07-17

Originally Posted by 1337Wesley

I am very far of being a programmer or being able to do such thing. Can barely understand ollydbg. I wouldnt even be able to understand what to do with such dll sir. Thanks for the reply.

It's not as hard as you think, go to compile your first project and save your time with 5-10 line of c++

**1337Wesley** · 22-07-17

Originally Posted by myheart

It's not as hard as you think, go to compile your first project and save your time with 5-10 line of c++

I dont even know how to begin. Then how i use that dll with the main?.

-----------------------

I just did this with another main (such main is useless for me) and it worked.. need help fixing this one im using.

**KarLi** · 22-07-17

Originally Posted by 1337Wesley

I dont even know how to begin. Then how i use that dll with the main?.

-----------------------

I just did this with another main (such main is useless for me) and it worked.. need help fixing this one im using.

well give us your main.exe and we will try to help you. dont wait for us to ask you.

**1337Wesley** · 23-07-17

Originally Posted by KarLi

well give us your main.exe and we will try to help you. dont wait for us to ask you.

Yes sir and i am very grateful you are going to help me.

https://mega.nz/#!3MEhlLAJ!RFDaX-AEQxPuQhCk6cLc7pRpOZkzHin3Cyy9VZPQ-Co

**myheart** · 24-07-17

Originally Posted by 1337Wesley

Yes sir and i am very grateful you are going to help me.

https://mega.nz/#!3MEhlLAJ!RFDaX-AEQxPuQhCk6cLc7pRpOZkzHin3Cyy9VZPQ-Co

still recommend you start learn C++. you just can't enable it on main because have some thing like this in client Dll's

Code:

SetByte(0x004D1E69,0xEB); // Crack (mu.exe)

**KarLi** · 24-07-17

Hold on what main is this? what client? what server files..?

**1337Wesley** · 24-07-17

Originally Posted by KarLi

Hold on what main is this? what client? what server files..?

This is a main from titantech 12.00.02++ with custom adds. Items and custom settings. This main takes config from "c.main" which is generated by getmaininfo. This main is still a 1.04D

**KarLi** · 25-07-17

Originally Posted by 1337Wesley

This is a main from titantech 12.00.02++ with custom adds. Items and custom settings. This main takes config from "c.main" which is generated by getmaininfo. This main is still a 1.04D

Yeah thats why we cannot do it i guess, (if im right) its like the muem u files when u build the main u make it open with Launcher.exe config or not just like mu.exe but u rename it to Launcher.exe
hmm @natzugen help ;)

**Maddox** · 25-07-17

Originally Posted by myheart

create dll to check mu.exe
if(open)
start main
else
close main

share source?, Thanks :) :D

**Natzugen** · 25-07-17

its useless if the mu.exe was cracked from the dll, if you have the source just disable that part.

**myheart** · 25-07-17

Originally Posted by Maddox

share source?, Thanks :) :D

i already shared that source in this forums. just use search, have lot of thread ask to open mu.exe by main.

**1337Wesley** · 25-07-17

Originally Posted by myheart

i already shared that source in this forums. just use search, have lot of thread ask to open mu.exe by main.

I dont want to take your time but i've been doing what you told with no success, i dont know where to start. You are telling me to go "right" when i dont even know that directions even existed. I really thank you. What should i even search to start doing what you say? What software should i buy or download?

- - - Updated - - -

Originally Posted by natzugen

its useless if the mu.exe was cracked from the dll, if you have the source just disable that part.

Do not have the sources, and if i even had them, its kind of hard for me to understand how to compile or even disable something, i cant even imagine.
CAn i disable something @ ollydbg or HxD to make it work?

**myheart** · 25-07-17

no problems. i have some free times to make it.

https://mega.nz/#!GVtFmAiA!d51trDqKF...iGf2VCm7P8icX4

API to hook: Init / work any main / but will not work some launcher

Config Data/Local/mu.dat
WindowName is this:

**1337Wesley** · 27-07-17

Originally Posted by myheart

no problems. i have some free times to make it.

https://mega.nz/#!GVtFmAiA!d51trDqKF...iGf2VCm7P8icX4

API to hook: Init / work any main / but will not work some launcher

Config Data/Local/mu.dat
WindowName is this:

Thanks for your job. Maybe i did something wrong (for sure) because it did not deny me to open main.exe without launcher. What i did:
Paste file on mu folder & replaced Data folder> Open lord PE> PE Editor > Directories > Import table ... > Add import > write mu.dll & Init then press +> Ok | Save - ok | save - ok>

Went to main.exe, double click and it started w/o launcher anyway. Launcher was named "mu.exe"

ADD: tested deleting the mu.dll from the folder and it is asking me for the DLL so i assume it is well hooked.

**myheart** · 27-07-17

Originally Posted by 1337Wesley

Thanks for your job. Maybe i did something wrong (for sure) because it did not deny me to open main.exe without launcher. What i did:
Paste file on mu folder & replaced Data folder> Open lord PE> PE Editor > Directories > Import table ... > Add import > write mu.dll & Init then press +> Ok | Save - ok | save - ok>

Went to main.exe, double click and it started w/o launcher anyway. Launcher was named "mu.exe"

ADD: tested deleting the mu.dll from the folder and it is asking me for the DLL so i assume it is well hooked.

Copy mu.dat to Data/Local/

open and set Type = 1

------

edit: StudPE doesn't work, i don't know why.
use Libhook or DLibAttacher

**1337Wesley** · 27-07-17

Originally Posted by myheart

Copy mu.dat to Data/Local/

open and set Type = 1

------

edit: StudPE doesn't work, i don't know why.
use Libhook or DLibAttacher

It already is

[Launcher]Type=1WindowName=MULauncherName=mu.exe;// Type 0/1;// Name[50]

------

edit: StudPE doesn't work, i don't know why.
use Libhook or DLibAttacher

will try, will update tnx

**myheart** · 27-07-17

Originally Posted by 1337Wesley

will try, will update tnx

to make it work, require your launcher have sleep(xxx) time before close, after click start button

**1337Wesley** · 27-07-17

Hooked it with DLibAttacher:TLS Callback+Tick "enable procedure call", Wasnt able to hook it with EntryPoint "Error can't attach!", opened main.exe then mu.exe launched, but when i press "Start Game" mu.exe launches itself.

**myheart** · 27-07-17

Originally Posted by 1337Wesley

Hooked it with DLibAttacher:TLS Callback+Tick "enable procedure call", Wasnt able to hook it with EntryPoint "Error can't attach!", opened main.exe then mu.exe launched, but when i press "Start Game" mu.exe launches itself.

https://mega.nz/#!mc03XIoK!TNsVWv5d7...uWi2ywBQO_nDlA libhook 100% work

and depend your launcher, will not work if doesn't have time sleep before close

and you need correct this:

WindowName=Launcher Name(main close if this wrong)

**1337Wesley** · 27-07-17

Originally Posted by myheart

https://mega.nz/#!mc03XIoK!TNsVWv5d7...uWi2ywBQO_nDlA libhook 100% work

and depend your launcher, will not work if doesn't have time sleep before close

and you need correct this:

WindowName=Launcher Name(main close if this wrong)

Ok, correctly hooked, but facing the same problem. The name that appeared in the process is Mu Auto Update. Do you think that having spaces is an issue?

And i will need help to add time before closing the auto updater, i tried to google that but nothing appeared. Do you know any guide or video to make this? i cant find anything related

- - - Updated - - -

This is the config

Force main.exe 1.04D to open Mu.exe. (ALREADY JNZ, YET NO Mu.exe CALL) (PICS)

Thread Tools

Search Thread

Force main.exe 1.04D to open Mu.exe. (ALREADY JNZ, YET NO Mu.exe CALL) (PICS)

Re: Force main.exe 1.04D to open Mu.exe. (ALREADY JNZ, YET NO Mu.exe CALL) (PICS)

Re: Force main.exe 1.04D to open Mu.exe. (ALREADY JNZ, YET NO Mu.exe CALL) (PICS)

Re: Force main.exe 1.04D to open Mu.exe. (ALREADY JNZ, YET NO Mu.exe CALL) (PICS)

Re: Force main.exe 1.04D to open Mu.exe. (ALREADY JNZ, YET NO Mu.exe CALL) (PICS)

Re: Force main.exe 1.04D to open Mu.exe. (ALREADY JNZ, YET NO Mu.exe CALL) (PICS)

Re: Force main.exe 1.04D to open Mu.exe. (ALREADY JNZ, YET NO Mu.exe CALL) (PICS)

Re: Force main.exe 1.04D to open Mu.exe. (ALREADY JNZ, YET NO Mu.exe CALL) (PICS)

Re: Force main.exe 1.04D to open Mu.exe. (ALREADY JNZ, YET NO Mu.exe CALL) (PICS)

Re: Force main.exe 1.04D to open Mu.exe. (ALREADY JNZ, YET NO Mu.exe CALL) (PICS)

Re: Force main.exe 1.04D to open Mu.exe. (ALREADY JNZ, YET NO Mu.exe CALL) (PICS)

Re: Force main.exe 1.04D to open Mu.exe. (ALREADY JNZ, YET NO Mu.exe CALL) (PICS)

Re: Force main.exe 1.04D to open Mu.exe. (ALREADY JNZ, YET NO Mu.exe CALL) (PICS)

Re: Force main.exe 1.04D to open Mu.exe. (ALREADY JNZ, YET NO Mu.exe CALL) (PICS)

Re: Force main.exe 1.04D to open Mu.exe. (ALREADY JNZ, YET NO Mu.exe CALL) (PICS)

Re: Force main.exe 1.04D to open Mu.exe. (ALREADY JNZ, YET NO Mu.exe CALL) (PICS)

Re: Force main.exe 1.04D to open Mu.exe. (ALREADY JNZ, YET NO Mu.exe CALL) (PICS)

Re: Force main.exe 1.04D to open Mu.exe. (ALREADY JNZ, YET NO Mu.exe CALL) (PICS)

Re: Force main.exe 1.04D to open Mu.exe. (ALREADY JNZ, YET NO Mu.exe CALL) (PICS)

Re: Force main.exe 1.04D to open Mu.exe. (ALREADY JNZ, YET NO Mu.exe CALL) (PICS)

Re: Force main.exe 1.04D to open Mu.exe. (ALREADY JNZ, YET NO Mu.exe CALL) (PICS)

Re: Force main.exe 1.04D to open Mu.exe. (ALREADY JNZ, YET NO Mu.exe CALL) (PICS)

Re: Force main.exe 1.04D to open Mu.exe. (ALREADY JNZ, YET NO Mu.exe CALL) (PICS)

Advertisement