[Help] Server setup using IGCN-v9.5-MuServer-S9EP2

[DooDz22]

Hi Guys!

I've used IGCN-v9.5-MuServer-S9EP2 server files and im basing my files and client to Daovanstrong
https://github.com/daovantrong/IGCN-v9.5-MuServer-S9EP2

I've tried everything on the video tutorial and even set up my IP both WAN and 127.0.0.1 to be in the safe side and open the ports and stuff still I get DC`ed whenever i tried to login , I've changed the IP on the main.exe and also into the serverinfo in the client , still the same , could you shed a light into this?


I appreciate your help.

[MentaL]

[DragonSeth]

If you need a compiled version i would recommend these: http://forum.ragezone.com/f197/compi...erver-1126961/
I use them for a bit and they work pretty good. And you don't need to change IP on main.exe only serverinfo.bmd

[DooDz22]

If you need a compiled version i would recommend these: http://forum.ragezone.com/f197/compi...erver-1126961/
I use them for a bit and they work pretty good. And you don't need to change IP on main.exe only serverinfo.bmd

Thanks , i was able to get it work , but i have another issue , could you help distinguise this? see screenshot : https://www.screencast.com/t/kzwGtLllEc

[DragonSeth]

Disable the DLL requirement in the server files which should be in the common.ini or the IGC.dll doesn't match up to the server version so you have to replace the files.