DUN need tis Ip -.- GO start click run type cmdQuote:
Originally Posted by luigix
then a command prompt came out type ipconfig tat is ur ip and u forward using tat ip -.-
Printable View
DUN need tis Ip -.- GO start click run type cmdQuote:
Originally Posted by luigix
then a command prompt came out type ipconfig tat is ur ip and u forward using tat ip -.-
after i had start the server and when i start my client. i get the error message as the screen shot attached.
can anyone help me ...... pls......
Ok.. Im New at this stuff and has been up about 20 hours without sleep.. I set up everything that you told me to...When i go to test the Links Foler with the 8 programs all of them say this:
SQLSTATE:08001,diagnosis:[Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]Specific SQL server now found..
If I Push This I get the Error Messege:
SQLSTATE:08001,diagnosis:[Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]ConnectionOpen(Conenect())
Someone Plz dont delete this post i just need some help. And im sorry if i missed it through the faq guides cuz i went through about all of em.
Thx. Tyler
Can anyone give me the link to download mureg.exe ?
i did whatever u ask me too in the guide ( thanks btw ) but if i change my ip at the internet connection i cant connect to the internet . if i change back to my normal one i can connect to the internet but i cant go into my server ( it says im disconnected ) even if my ip is the global ip i also cant connect .. may i know the problem please
Now , my server is working fine ? i open all 8 links one by one and my com lag like hell but still i got diconnected from the server , but this time is not in the middle , its at the side in blue words . please help me
Hi all ( i am english little)
İ have v97d+99 server is runnnig
Local is nt problem
Wan is nt problem
But LAN + WAN nt connect!
Pls help me
What open port?Pls Ragezone plsssss :( :( :(
To Boko
Please help me this is my last problem ( I think ) Im having problems with my links . when i open link 5 its says Failed to connect MU2003 Event Db To Load Maximum Index and Failed to lord mutto number file . when i open my link 8 alot of pop ups with error as their headline appeared but the words cant be read . Please help me
nooby here
when i install SQL and i follow al ur instructions just at the configration my install failes then i look in the log and this is the error
--------- [Microsoft][ODBC SQL Server Driver][Shared Memory]General network error. Check your network documentation------
what must i dooo :S
Ok I have a problem all my other links work but the 08 link.
When i go into it it said a whole bunch of stuff... So i found the files put em where they were spose to be.. Now it cannot find messege_kor.wtf
does anyone know where i can get that file or can anyone post it here. thx
i have no clue wat to do with the port fowarding it seems netgear is different to the others.
here is screenshot of the port fowarding set up of my router. wat do i do???
i keep on gettin D/C btw my router is linksys BEFW11s4 V.4 can you tell me why?? i have follow all the step.....
Connecting to your Server
There are several ways to connect to your Server, but the best thing is using a launcher (That's what I think):
1. Unzip the 0.96y client full in a new folder (Make one yourself)
2. Unzip the 0.97 patch in the same folder
3. Unzip the 0.97 english patch in Data/Local folder (In the folder you made)
4. Unzip the launcher in the folder you made (same folder as 0.96y and 0.97 patch)
5. Run launcher 2.exe. Name = Your Server Name, Host = Your Global IP, Version = 0.97 (Until you've updated the server of course), port = 44405
and step 1 to 5 i dun understand it....
Ok I got the server working fine with lan. I've changed all the settings to my WAN adress but I can still connect lan. My friends can ping the server and can see the 1 server, but when they click on it they get disconnected. Im pretty sure the problem is what is described as the loopback device. I set it up but unfortuneatly no one can connect when its on. I know the ports are foward because I set my router to DMZ for the comp. Is the Loopback device really necesary?
i need help with Editing IP Address and Setting up Server Files
i cant open the files(.dat and cfg) so i cant do the ips help
2. Change all the ip addresses found in config files to the IP adress you see in www.whatismyip.com (this is your Global IP)
All Ip adresses in the following files must be changed to this Global IP Address:
C:\muserver\CS\Connectserverlist.dat
C:\muserver\CS\data\Connectserverlist.dat
C:\muserver\CS\data\ServerList.dat
C:\muserver\data\IpList.dat
*C:\muserver\data\lang\eng\commonloc.cfg
*C:\muserver\data\lang\kor\commonloc.cfg
*C:\muserver\data\lang\tai\commonloc.cfg
*C:\muserver\data\lang\chs\commonloc.cfg
http://img116.exs.cx/img116/7734/untitled1ny.jpg
This is what i get every time i try login with the sa user and the password .... Can someone please help me ?
Very Very good guide dude. Informative and straight to the point
Hello
I have now set up everything but my router says this when i tried to add the following ports : * 44405 TCP(only got this to work)
(one every single port you see here except the one that i got worked i all get this msg when trying to apply the ports : Duplicate entry or entry conflicts with previous configuration :eh:
* 55557 UDP
* 55970 TCP
* 55971 TCP
* 55960 TCP
* 55961 TCP
* 55962 TCP
* 55557 TCP
* 55901 TCP
And i tried to lauch the main shortcut with connect/u My Ip / and the port But when i then got inn i just got a blank screen (just mu online ) not any server ... So it might be the Launcher.exe that i can`t download (becuase the link you provided is dead) or that i can`t open the ports....
Please Help Me Here Bounce8 :bounce8:
I need help
hi people!!!
I need a help, i folow al tutorial but the link 8 not work, all others links works fine but the link 8 dont work ic hier
http://www.snevo.com/muonline/erro.JPG
please somebody help me
i search for other guids but dont find
hmm this is what i get : http://img113.exs.cx/img113/8765/scr...33100009zi.jpg
Just nothing.......probably because i only have 44405 port open , my ISP is fixing the rest of ports .......plz answer though if you know why i cant connect....
Btw i need launcher ..someone plz send me :thumbup:
edit: i just have the server running....not the inks in links
Hello
i now got almost everything to work except the ports.........This pic show that it works but when i try the main shortcut with connect command in properties i only get resolution 1024x760 and it stays in that resolution without entering the actual mu....Please help me here and what does the kind of error mean in this pic : http://img38.exs.cx/img38/5097/untitled5yx.jpg
I also need launcher ........Can i connect with my own connection or do i have to try with a friends comp ?
Hello
I would like this to be taken in picture guide :
3. Go to Start -> Run and type in "cmd". It will load a command prompt. Type ipconfig /all in command prompt to check your ip adress (This is your Computer IP).
4. Change all Ip adresses in the following file (There are 3 IP adresses in this file) to your Computer IP: C:\muserver\data\commonserver.cfg
5. Change the IP Addresses found in 4.lnk and 8.lnk in the c:\muserver\Links folder(right click on them and select properties) to your Computer IP.
I dont understand what ip om suppose to choose....
I know this it tells u this becouse u write the same ip 2 times which u have toQuote:
gamerman Hello
I have now set up everything but my router says this when i tried to add the following ports : * 44405 TCP(only got this to work)
(one every single port you see here except the one that i got worked i all get this msg when trying to apply the ports : Duplicate entry or entry conflicts with previous configuration
* 55557 UDP
* 55970 TCP
* 55971 TCP
* 55960 TCP
* 55961 TCP
* 55962 TCP
* 55557 TCP
* 55901 TCP
but ur router reads it as a dublicate which means u can forward only 1 port
In other words i cant set up server ? :(
Il let my ISP take care of this opening i mean i should be able to forwarding ports with the router that came with the modem its like and router inside the modem that came when i order my broadband
Find Out Your Router name and Version and search for it here. It Says exactly how to forward ports with pictures. Big variety of routers
my eror has solution ??Quote:
Originally Posted by Zerocould
bye