Setup your MuOnline server Season 1/2/3/4/5/6/7/8/9 S16+S17

Greetings!

:(:

I carefully followed every Detail.

All ip's and configurations, please check:

step1.png - 4shared.com - photo sharing - download image
step2.png - 4shared.com - photo sharing - download image
step3.png - 4shared.com - photo sharing - download image
step4.png - 4shared.com - photo sharing - download image
step5.png - 4shared.com - photo sharing - download image
step6.png - 4shared.com - photo sharing - download image
step7.png - 4shared.com - photo sharing - download image
step8.png - 4shared.com - photo sharing - download image
step9.png - 4shared.com - photo sharing - download image
step10.png - 4shared.com - photo sharing - download image

I checked my commonloc to view the IP, Serial, and version as tuter said, but i only found:

SCF_common1.png - 4shared.com - photo sharing - download image
SCF_common2.png - 4shared.com - photo sharing - download image

I checked all files and found SCF_common, it contains serial and version:

SCF_common1_2.png - 4shared.com - photo sharing - download image
SCF_common2_2.png - 4shared.com - photo sharing - download image

Ok so i go to the client i open main.exe using the main cracker and this is what i saw:

mainIP1.png - 4shared.com - photo sharing - download image

Then i changed it:

mainIP2.png - 4shared.com - photo sharing - download image

I save and close.

So now...

I run as administrator my MuServerStartUp.
Sucessfully no prompt for errors:

Attachment 82316

so ok then i run SCFdb3:
Sucessfully no prompt for errors:

Attachment 82317

Then i run RunServer_GS
a prompt for error occured:

Attachment 82318

Well i dont know what caused this?
Could this be the problem???????
But i click OK for 10 times and the error dissapeared
and this shows up:

Attachment 82319
Attachment 82320

Ok then after that i run RunServer_CS
no prompt for errors:

solution6.png - 4shared.com - photo sharing - download image
Solution7.png - 4shared.com - photo sharing - download image

Then i run RunServer_Sub
no prompt for errors:

Solution8.png - 4shared.com - photo sharing - download image
Soulution9.png - 4shared.com - photo sharing - download image

And SCFdb3 becomes this:
Solution10.png - 4shared.com - photo sharing - download image

and then i go to the client
and run main.exe
so it loads loads loads

and then :(:
"You are Disconnected from the Server"

Please Help me.. :(:

@Gerard316
Sorry dude i cannot reply to your pm, i have not enough post to do so.

Btw, if you are asking me where did i download my sql i just download it here:

http://forum.ragezone.com/f196/setup...-1-2-a-607638/

choose SQL server 2000

Probably your wondering how did i download and install it successfully, since we have the same OS,i guess(windows 7).

Heres what i did:
BEFORE i download it, i DISABLE my antivirus (see in my taskbar its color red), and i also TURNED OFF my windows firewall, then i download it. That's all.

ports opened?
got wireless connection or normal dsl box / router ?
Open Port Check Tool check ports.

Dude im not having disconnected now.

I use the internet loopback.................................

ok it load it loads it loads..

no disconnection notice

i saw the "Server" (at last i entered!!!, i said it to myself)

so click it:

then i saw S1, and S2
(im very excited and so happy)

BUT :(:

when i click one of them


it says: REQUIRE NEW VERSION, DOWNLOAD NEW VERSION FROM THE WEBSITE.

:(:

Why why why what's wrong??????????????????????????????????

check Client version on main.exe with maincracker if it is 22895 or what is it
it should be same with the server files client version.

i ve done all steps and when i try to connect in server i can see a chinese launcher and
what ever i push nothing happens can u tell me what to do ?

first of all u dont tell what files ur using.

2nd maybe search the thread about this problem it happened not just 1 time and already fixed.

http://i250.photobucket.com/albums/g...ntitled-20.jpg

Any Ideas?? Running Season 4 Server.

Thanks in advance =]

---------- Post added at 09:31 PM ---------- Previous post was at 09:31 PM ----------

That is also running on Windows XP SP3 32 bit.

u should change 1.05.50 on main.exe to 22895

Where did you get 22895 from?

---------- Post added at 12:39 AM ---------- Previous post was at 12:35 AM ----------

And change it on both the Client Main.exe and in SCF_Common.cfg?

---------- Post added at 12:43 AM ---------- Previous post was at 12:39 AM ----------

Sorry about adding more and more things to my post, but any idea how to fix this error?

"SCFMT.DLL:archivo no encontr..."
".\error"

It happens when I run the gameserver.

---------- Post added at 12:56 AM ---------- Previous post was at 12:43 AM ----------

Okay, I got the server running and got myself logged in =] Thanks for all the help, really appreciate it!

no dont change it on scf_common just on main.exe
1.05.50 = convert for main.exe = 22895


"SCFMT.DLL:archivo no encontr..."
".\error"

is nothing important u can ignore it
if u dont like it that much then we can do something.

I mean, it gets annoying everytime I open the gameserver I gotta hit okay like 10 times but I'm not too worried about it because the server runs =]

Uhmmmm, So I'm kinda new in making a private server. So I've got a few newb questions. But I successfully created a S4 Private Server.

1st Question: How to add Sockets on S4 Items. 'Cause when I make a S4 Item it does not have sockets.

2nd Question: Since I created a private server, I didn't want to play alone so I wanted to invite my friends to play my server. But the thing is, they can't connect to my server.

If anyone knows a solution to my problem, please answer. I would appreciate if you will help me out. Anyway thx in advance, and Great Guide for newbies like me :D

same 2nd question (problem) with samspawn

Quote:

---

Originally Posted by SamSpawn

Uhmmmm, So I'm kinda new in making a private server. So I've got a few newb questions. But I successfully created a S4 Private Server.

1st Question: How to add Sockets on S4 Items. 'Cause when I make a S4 Item it does not have sockets.

2nd Question: Since I created a private server, I didn't want to play alone so I wanted to invite my friends to play my server. But the thing is, they can't connect to my server.

If anyone knows a solution to my problem, please answer. I would appreciate if you will help me out. Anyway thx in advance, and Great Guide for newbies like me :D

---

have to put your global ip some files,

check all the guides here,,

Quote:

---

Originally Posted by nofeara

same 2nd question (problem) with samspawn

---

edit monstersetbase ,,,:thumbup:

Quote:

---

Originally Posted by tutero69

have to put your global ip some files,

check all the guides here,,

---

I've already change my IP's to my Gloabl IP. The thing is that I have Dynamic IP so it changes everytime.

Greetings!!!:):

ok i think im on my way to in making the legendary mu online..:P:
thanks for the guides..

but still i need help and have some questions since (I AM A NOOB). and i guess tired reading all tuturial in ragezone

well i want to start fixing this:

Attachment 82318

Anyone who knows how to fix this???
Its anoying opening the server and this shows up and i need to click "OK" ten times before it dissappear...

@ samspawn

dude download this Download Hamachi

use its IP in replace for your global IP

see:
help.png - 4shared.com - photo sharing - download image

I hope it helps:rolleyes:

Ok so I've solved my problem about the IP. I already used the Hamachi Ip.

Now my problem is, how can I make the sockets appear in S4 Items. 'Cause every time I make a S4 Item, it doesn't have sockets in it.

Quote:

---

Originally Posted by SamSpawn

Ok so I've solved my problem about the IP. I already used the Hamachi Ip.

Now my problem is, how can I make the sockets appear in S4 Items. 'Cause every time I make a S4 Item, it doesn't have sockets in it.

---

for ip better to use no-ip
here ---> No-IP - Dynamic DNS, Static DNS for Your Dynamic IP

enable sockets in data folder/s4setitems
or in GS/season4

Quote:

---

Originally Posted by tutero69

for ip better to use no-ip
here ---> No-IP - Dynamic DNS, Static DNS for Your Dynamic IP

enable sockets in data folder/s4setitems
or in GS/season4

---

Sure thing I'll try both of that. But how do I use the No-IP? Never used it and never heard of it before.

Quote:

---

Originally Posted by SamSpawn

Sure thing I'll try both of that. But how do I use the No-IP? Never used it and never heard of it before.

---

here check here

--> http://forum.ragezone.com/f196/ip-se...online-367919/

hi guys.. i have a problem about SQL 2000.. i cant start.. it says error 6(the handle is invalid).. im using win 7 32bit ultimate..

can you tell me what is the problem..

Quote:

---

Originally Posted by karLi

Dude i said previously SQL Server 2000 works on 64bit u just have to install it from /SQLEVAL/x86/Setup/Setupsql.exe/ if u dont have then sry u must try sql 2005 or other stuff.

---

Quote:

---

Originally Posted by muhyul

hi guys.. i have a problem about SQL 2000.. i cant start.. it says error 6(the handle is invalid).. im using win 7 32bit ultimate..

can you tell me what is the problem..

---

up here is the post of KarLi hope you are

guided and enlightened ,,,

and please check other tutorial threads

you might find some answers there ,,:ott1:

Quote:

---

Originally Posted by muhyul

hi guys.. i have a problem about SQL 2000.. i cant start.. it says error 6(the handle is invalid).. im using win 7 32bit ultimate..

can you tell me what is the problem..

---

try updating ur windows
also if not gonna work install another serivce pack.

uhd dude, how can i fix my problem regarding ...
http://forum.ragezone.com/attachment...-solution3.png
without clicking 10 times???

btw,,,, i first use that no-ip things but i did not worked.. i dunno why.

im not sure nofeara u must put scfmt.dll in right place so the gs wont error.