[Release] Change glow color? Piece of cake =)

[|ARIES|]

Hacke, really thanks, but i'm lool in ollydbg, I try, but nothing happened, i'm learning english & try to understand guides, but i'ts difficult to me... english+ollydbg+ARIES=LOOL

Sorry for made lost your time.

Sorry my english.

[Hacke]

aries here is your main its patched and hooked... http://rapidshare.com/files/122956194/main_aries.rar

nihil and this is your main ....
http://rapidshare.com/files/122956353/main_nihil.rar

[|ARIES|]

Great! You are the best! Y really thanks you!

[muillusion]

i tried to hook the dll, and in the end looks like this:


its correct??

[Hacke]

no its not right try it again

[_Nihil]

Thanks a lot for that main, now i have to make another, but this time on my own.
I had 'ModuleEntryPoint', too. Why? I wrote there 'jmp 0073bd18'.

[muillusion]

im having problems with this...i have made all the steps in this guide and dont have problens in none...but the glow of itens "glowed" dont chage...maybe im patch the dll wrong or how knows....u can search teh offset and the calls for me Gembrid? and help me in hooking? thnx anyway!

ps: im using the main of fhx 1.04h (with all new itens)
Main 1.04h + Fhx New Itens ADDs

[TurionX2]

Hello guys! Please hooking main 3D with Serial 1.04j and Items FHX all. Thanks

[_Nihil]

Hacke, you should make a movie how you hook a main, because even I write there jmp 0073bd18, it's always <ModuleEntryPoint>
@down

of course...because the 0073bd18 its the EP (EntryPoint)

Ehh, but it should be there main.0073bd18, not main.<ModuleEntryPoint>.

[muillusion]

Hacke, you should make a movie how you hook a main, because even I write there jmp 0073bd18, it's always <ModuleEntryPoint>

of course...because the 0073bd18 its the EP (EntryPoint)

[_Nihil]

Ehhh, I was making all good without this ^^
'afterwards you can change the Entry Point to the Offset of your dll by useing PE EXPLORER (a very nice tool)'
my foult ;

http://img370.imageshack.us/img370/8...9260000ss7.jpg
http://img122.imageshack.us/img122/3...9270001qv5.jpg
Looks perfect now ;]

[muillusion]

Ehhh, I was making all good without this ^^
'afterwards you can change the Entry Point to the Offset of your dll by useing PE EXPLORER (a very nice tool)'
my foult ;

http://img370.imageshack.us/img370/8...9260000ss7.jpg
http://img122.imageshack.us/img122/3...9270001qv5.jpg
Looks perfect now ;]

this itens rox... :D
where u get them??

and where u get the PE EXPLORER or the lordPE?

[Mititicu]

00753C60                                .  77 7A 47 6C 6F 77 2E 64 6C 6C 00     ASCII "Glow.dll",0
----------------------------------------------------------------------------------------------------------
00753C88                                .  50                                   PUSH EAX
00753C89                                .  90                                   NOP
00753C8A                                .  68 603C7500                          PUSH main.00753C60                                         ; /FileName = "Glow.dll"
00753C8F                                .  E8 08F3127C                          CALL kernel32.LoadLibraryA                                 ; \LoadLibraryA
00753C94                                .  09C0                                 OR EAX,EAX
00753C96                                .^ 0F84 8CDACAFF                        JE main.00401728
00753C9C                                .  FFD0                                 CALL EAX
00753C9E                                .  58                                   POP EAX
00753C9F                                .  55                                   PUSH EBP
00753CA0                                .  8BEC                                 MOV EBP,ESP
00753CA2                                .  6A FF                                PUSH -1
00753CA4                                .  E9 15030000                          JMP main.<ModuleEntryPoint>

Can anybody say if this is ok?

[_Nihil]

this itens rox... :D
where u get them??

and where u get the PE EXPLORER or the lordPE?

They're from silkroad, gnomiux release.
PE EXPLORER
http://www.heaventools.com/files/via...orer_setup.exe

Here's your main
http://www.sendspace.com/file/moca97

it should works

[[FIUZ]]

Ehhh, I was making all good without this ^^
'afterwards you can change the Entry Point to the Offset of your dll by useing PE EXPLORER (a very nice tool)'
my foult ;

http://img370.imageshack.us/img370/8...9260000ss7.jpg
http://img122.imageshack.us/img122/3...9270001qv5.jpg
Looks perfect now ;]

Upload please this set