i have a problem.
Unable to load Gameserver.dll
i already installed .net framework 3.0 and 4
but still no work..
what should i do ^_^
Printable View
i have a problem.
Unable to load Gameserver.dll
i already installed .net framework 3.0 and 4
but still no work..
what should i do ^_^
read all thread
Upload Main.exe server version please. >>>
ClientExeVersion = 1.00.90
ClientExeSerial = 8gksYM30JnvgqpcP
Hey....
how to crack main, i cant see new items... ;S
plz original main.exe by shatter server version
ClientExeVersion = 1.00.90
ClientExeSerial = 8gksYM30JnvgqpcP
just change in server files Data\Lang\Jpn\CommonLoc.cfg
[GameServerInfo]
ClientExeVersion = 1.02.40
ClientExeSerial = 8gksYM30JnvgqpcP
LootingTime = 10
and use the orginal main from his 1st post
pkitem drop problem. How to improve? and how to itemdrop off?
Shatter plz upload tested gameserver.dll end gameserver_CS.dll
upload original gameserver.dll end gameserverCS.dll end original main.exe
how to set up this source files?
Guys, can someone help me? Three times I tried to run this server, but same problem: when run main.exe, loads screen and then server doesn't appear.
I've even downloaded notepad++ to search in all server files IP's and Sql passwords. Only one place where I didn't change IP was ConnectServer\Data\ServerInfo.dat (there is Public FTP, Local FTP, but if I don't use FTP, so I think I don't need to change there)
I tried both: with normal ip and with 127.0.0.1, same problem.
I'm using router, but I made that all ports would be open, firewall+antivirus turned off.
Using client, which Shatter posted: "MU Online Client (NoSound)".
When I've used 127.0.0.1, I've used MainCracker. So my fields are like this:
IP Address: 127.0.0.1
Serial (default from main, don't know should I change that): 8gksYM30JnvgqpcP
Version(default from main): 22585
Thank You very much!
prebuss, try to change main.exe with hex editor. main cracker as a rule not a good solution at all. and- do you try main.exe with your global ip (not 127.0.0.1 crap)?
my advice- if you have global ip, use it anywhere in server/client files. if not have- create/use loopback device.
serial and version must be identical to Data\Lang\*\CommonLoc.cfg. but if you can't connect- problem is not in it.
Thank You for replying, appreciate it :)
So, I've made like You said, changed everywhere IP to my global IP, then used hex editor to edit IP to my global. But here are some new problems, questions:
1) Well, luckily, server files' and client's Serial are same. Now about IP and version changing. IP. I used hex editor to change IP, but when I found where is IP (cs.muonline.....) I mentioned that it is longer than my IP and when I change one by one character, there still some characters with default IP keeps. So, when I tried to remove (delete) that end of default IP, saved and main.exe become not valid program, so I just left ending of that default IP (with my IP in the beginning of default IP). Then it didn't become unstable program. So, how should I make that correctly?
2)Version. In Data\Lang\*\CommonLoc.cfg writes:
ClientExeVersion = 1.00.90
In my client (main.exe used http://forum.ragezone.com/f196/calcu...editor-249171/ this lesson) shows: 1.02.40 (Config.ini same)
So, where should I change? In server files or in client?
And last thing, something is wrong after few minutes of server start up.
Logs of GS and GSCS (attaches), please review :blush:
Screen Shots:
http://img253.imageshack.us/img253/3487/21795734.png
http://img248.imageshack.us/img248/7627/57396681.png
http://img825.imageshack.us/img825/4593/86122704.png
http://img263.imageshack.us/img263/2503/62683770.png
http://img826.imageshack.us/img826/6416/18751023.png
Thank you :love:
P.S. I've created some servers before but not with CzF. I'd really like to try these files, help...:(:
prebuss,
Wrong place. You need to find "xxx.xxx.xxx" (you can read it in czf 4.5 thread's start post) and change it to your ip. If there any useless characters (like you said), you must change it to 0x00 (\0) byte. Because ip string is common string, and it is a null(\0)-terminated string. (Don't delete but change!) Don't change ip in any other places(like cs.muonline).Quote:
when I found where is IP (cs.muonline.....)
No matter where it is to change - only important that they were identical. Config.ini and most files in game root folder is a useless crap, only used by original launcher. You must verify only CommonLoc.cfg and main.exe hard-coded versions.Quote:
ClientExeVersion = 1.00.90
In my client (main.exe used http://forum.ragezone.com/f196/calcu...editor-249171/ this lesson) shows: 1.02.40 (Config.ini same)
So, where should I change? In server files or in client?
Looking at the logs, -your gs and gs-cs can't connect to other servers(data's, exdb, cashshop, ranking). This is strange, because firstly they connected, but after some time(5 min?) were disconnected. As host system you use win2003 sp2?Quote:
And last thing, something is wrong after few minutes of server start up.
Logs of GS and GSCS (attaches), please review
Done! I think now everything will be fine from client side.Quote:
Wrong place. You need to find "xxx.xxx.xxx" (you can read it in czf 4.5 thread's start post) and change it to your ip.
Done, changed version same as main.exe (1.02.40)in both CommonLoc.cfg files.Quote:
No matter where it is to change - only important that they were identical. Config.ini and most files in game root folder is a useless crap, only used by original launcher. You must verify only CommonLoc.cfg and main.exe hard-coded versions.
Ok, now everything works fine, except one thing.
It will be clearer if I tell you where I changed IPs (127.0.0.1 and global)
1) CashShopServer (downloaded CashShopServer.bat from CzF thread, cuz before cash shop server showed common error).
To be sure, I've added in AllowableIPList.txt two IPs, global and 127.0.0.1
CashShopOption.ini I used 127.0.0.1, cuz if I used global IP, simply it couldn't connect to SQL, dropped error. So with 127.0.0.1 it works fine. (I've changed to 127.0.0.1 in Data\CashShopOption.dat). WITH this one is everything fine, no errors in GS, GSCS.
Chatserver. Didn't change anything, cuz there aren't any IPs.
\ConnectServer\Data ServerInfo.dat didn't change, cuz there requites IPs for FTP only.
\ConnectServer\Data ServerList.dat 2x mine global IP.
C:\MuServer\Data\Lang\Jpn CommonLoc.cfg changed IP to global+changed clientexeversion to 1.02.40
Same in C:\MuServer\Data\Lang\Kor
Data\CashShopOption.dat as I already said, changed IP to 127.0.0.1
Data\CommonServer.cfg everywhere my global IP.
Data\IpList.dat Global IP.
Data\MapServerInfo.dat 2x Global IP.
C:\MuServer\DataServer1 AllowableIPList.txt my global IP (w/o dots)
Same as DataServer1 made in DataServer2
C:\MuServer\JoinServer\Data CountryIP.txt as there was I left 127.0.0.1
Now, C:\MuServer Configs.ini:
P.S. Using win xp pro, I've just made appearance as Win2003 (lower resource usage).Code:[Captions]
v0v=dataserver1
v1v=dataserver2
v2v=joinserver
v3v=connectserver
v4v=exdb
v5v=chatserver
v6v=eventserver
v7v=rankingserver
v8v=gameservercs
v9v=gameserver
[Paths]
v0v=dataserver1\
v1v=dataserver2\
v2v=joinserver\
v3v=connectserver\
v4v=exdb\
v5v=chatserver\
v6v=eventserver\
v7v=rankingserver\
v8v=gameservercs\
v9v=gameserver\
[Exes]
v0v=dataserver.exe
v1v=dataserver.exe
v2v=joinserver.exe
v3v=connectserver.exe
v4v=exdb.exe
v5v=chatserver.exe
v6v=eventserver.exe
v7v=rankingserver.exe
v8v=gameservercs.exe
v9v=gameserver.exe
[Commands]
v0v=55960 1
v1v=55962 2
v2v=/p55970 /caGLOBAL IP /cp55557
v3v=
v4v=GLOBAL IP
v5v=127.0.0.1 [USED THIS, cuz if global, chatserver couldn't connect to exdb. And here is the problem: GS and GSCS can't connect to joinserver]
v6v=
v7v=
v8v=GLOBAL IP 55970 GLOBAL IP 55962 55919
v9v=GLOBAL IP 55970 GLOBAL IP 55960 55901
[Interval]
v0v=2500
v1v=2500
v2v=2500
v3v=2500
v4v=2500
v5v=2500
v6v=2500
v7v=2500
v8v=2500
v9v=2500
[Restart]
v0v=no
v1v=no
v2v=no
v3v=no
v4v=no
v5v=no
v6v=no
v7v=no
v8v=no
v9v=no
[Main]
AutoRestart=0
RestartInterval=1
IP=GLOBAL IP
Problem written in configs.ini file (code) marked red [SCROLL down 3/4 bar, scroll right.
Thank YOU again! :blush:
can someone upload gameserver.dll & gameservercs.dll ?
plz
Just go here http://forum.ragezone.com/f197/czf-s...-5-1-a-618286/ and download that server files. Copy/paste [replace] GameServer.exe with your current GameServer.exeQuote:
Originally Posted by nahmani1
Same with GameServerCS.exe
If it still doesn't work, make sure you have installed .net framework and updated it to the newest version. Good luck, now I'm looking for help in my previous post. :(:
k it works.
but now when GS load i get error cashshopserver failed
i changed the ip there to 127.0.0.1
and the id+pass sql
IP must be identical in these files (according to cashshop):
CashShopServer\CashShopOption.ini
CashShopServer\AllowableIPList.txt
AND
Data\CashShopOption.dat
BTW, if it's not a secret, did you put everywhere else your GLOBAL ip (WAN)?
Still looking for help from my problem :( http://forum.ragezone.com/f197/czf-s...ml#post5996448
yea i changed all like the guide in page 6
and at cashshopserver folders all ip's should be global ip
or 127.0.0.1 ?
p.s
what should be the client exe version to edit at main with main cracker
i changed in commonlock to 1.02.40
127.0.0.1Quote:
Originally Posted by nahmani1
you changed correctly, remember to change both in JPN and KOR commonserver. Still looking for help: http://forum.ragezone.com/f197/czf-s...ml#post5996448
what version should be the main ?
it says 22858 but when i enter the game its says i need to uptade
something like thats
Same as you wrote in commonserver. Remember, that main.exe version is in hex coding.Quote:
Originally Posted by nahmani1
MAN, can you tell me what IPs did you use?
Did you use everywhere global IP except CashShopServer?
i did exactly what written in page 6
in cashopserver folder all IP's are 127.0.0.1
in commonlock the version is 1.02.40
what the hex for it to put in main cracker ?
is this stable?
prebuss,
Seems to me like strange manipulations because i use always my global ip and it works perfectly. Your global ip identical to What Is My IP Address - Shows Your IP Address?
In the first time your server works normal? If yes may you try to check first time configuration again? And after what moment your configuration broken?
If don't work at all, try to create microsoft loopback device and run with it.