[Discussion] Dual Quad Core Processor Dedicated Servers - 8 Cores

[biogenic70]

Core : Dual Intel Xeon 5620
RAM: 12GB DDR3 ECC
Hard Drive: 60GB Kingston KC300 SSD
Uplink Port Speed: 1000mbps
Bandwidth: 5000GB
Operating System: Windows 2003 Standard R2 (64bit)

Hello, i would like to open a discussion about computer requirements on hosting a private server. Hope others can consider this thread, i have server specs that written above which cost me around $250/monthly. Im just little confused on this specs, recently my players are experiencing lag problem when reaching 100 to 120+ online players which is not experiencing before even i have 160+ online i didnt change anything no updates no settings update just a single restart to refresh the server. I already tried to reformat the server even trying to upgrade another set of Uplink Port Speed, but theres no changes at all. Lag issue only exist when my players is on Market Place specially PK on Practicing Yard and Club War, but when they on party leveling in a map. Theres no problem only a minimal lag experience.

Any comment about this? Sorry for having bad/poor english anyway. I appreciate any comments for all who can read this thread.

Thank You

[MentaL]

[Tanakwagu]

there is definitely issue in your server side settings.. try check field server cfg.. sometimes setting the cpu thread in fieldserver cfg solves such problem..

[biogenic70]

Thanks for the reply which settings are you referring?

service_provider 3
max_thread 4
server_type 3
server_group 0
server_number 0
server_field 0
server_channel 0
//
pk 1
pkless 0
adult 1
testserver 0
heartbeat 1
gameguard 0
use_event_thread 0
Use_Intel_tbb 1

[Tanakwagu]

Thanks for the reply which settings are you referring?

service_provider 3
max_thread 4
server_type 3
server_group 0
server_number 0
server_field 0
server_channel 0
//
pk 1
pkless 0
adult 1
testserver 0
heartbeat 1
gameguard 0
use_event_thread 0
Use_Intel_tbb 1

try increasing max_thread to 5 or 6.. :P, & use_event_thread = 1

[biogenic70]

try increasing max_thread to 5 or 6.. :P, & use_event_thread = 1

thanks for the tip ;) i will try this, but what if nothing changed happened? will i need to try to increase max_thread more?