Npc, weapon, website problem nid help thanks

[redgie]

hello im back and full of joy thanks to this FORUM but i still have some problems...

1st my problem is this my friends.... i put my carts engines.. and cart parts on mildun... and they are there but the problem is this when i buy those it says... "problem at the NPC warn admin" some thing like that what should i do then....

2nd some of my items names are the descriptions... like the zephy bow... it should be zephy bow but instead of zephy bow as the name... the name of the item become..."a legendary bow that was made out of...." like that....

3rd still the website problem i hope some one can help me..
when you are a user and you log in to your cp it says you must log in you noob. and
when you log in as the admin it says user doens't exist.. but my access is 400 now i change it to 300 it says you must log in you noob... same as like the user huhuhu wat will i do....

4th how can i know all the ID CODES OF MY SERVER.. coz at the stl the item code is 51 but in the id list in the ms execell is 50.. im confused help please thanks


thanks in advance.....

[MentaL]

[Purpleyouko]

1) Do you mean that in the server it gives a message saying "WARNING, User "some username" purchased an item"?
If so then it is nothing to worry about

2) Sounds like your STL files are messed up. Did you edit them at all? This kind of thing sometimes happens when STBs and STL from one rose version are used in another. For example using irose STB/STL in an evo server/client.

3) Sorry can't help with the website

4) Item codes are found in the STB not the STL. The numbers in the STL are completely irrelevent. The values in there can be stored in any random order you like provided the reference value of the item is correct. The STB uses the reference value to pull in the name and description from the STL

[redgie]

1. it says "problem at the NPC, warn admin" some thing like that....
i did what imame told me, extract files using vfs editor then paste ai,questdata,stb to the 3ddata folder of my server files,,, and boom i can buy the carts i had put in BUT my wings are gone and some items... so what did i do is put back the original or the previous files on my 3ddata for me to use my wings.. cause i think i will just pick some files and paste it to my 3ddata files,. now the problem is what files should i paste in order for me to buy those carts..

2. mind if you check my STL and STB LIST_WEAPON..?
http://www.mediafire.com/?wntkmzmqzjm
i wish im right those are the patches before my item name went rumbled i dont have a dev.. my old dev done the patch 802 and patch 804 then i did then patch 06 08 and 10... OMG what should i do please help me thanks purpleyouko

3. i think i will just put the original back on the website.... but you can try the website just in case you want to help me there...
http://www.redgierose-online.co.nr/

4. OK THANKS for the item codes but is there a way i can convert the STB to MSExcell?.xls file format i think?

thanks for help purpleyouko.... i hope you help me till my problems are gone thanks

[Purpleyouko]

1. it says "problem at the NPC, warn admin" some thing like that....
i did what imame told me, extract files using vfs editor then paste ai,questdata,stb to the 3ddata folder of my server files,,, and boom i can buy the carts i had put in BUT my wings are gone and some items... so what did i do is put back the original or the previous files on my 3ddata for me to use my wings.. cause i think i will just pick some files and paste it to my 3ddata files,. now the problem is what files should i paste in order for me to buy those carts..

The only trick here is to use the SAME STB files in both client and server. If you modified something to add some carts then use the modified file in both. As long as they match there will be no problem.

2. mind if you check my STL and STB LIST_WEAPON..?
http://www.mediafire.com/?wntkmzmqzjm
i wish im right those are the patches before my item name went rumbled i dont have a dev.. my old dev done the patch 802 and patch 804 then i did then patch 06 08 and 10... OMG what should i do please help me thanks purpleyouko

Your patches look fine. i don't see anything wrong with the STBs and the STLs are definitely in the right format
In the weapons STB/STL there are some issues though. Places where you have changed the name of the weapon in the STB, you still have the original name in the STL. Like this "Redgie Of Shadow Sword" will be seen as this "Brave Blood Sword" in game because that is the name in the STL

3. i think i will just put the original back on the website.... but you can try the website just in case you want to help me there...
http://www.redgierose-online.co.nr/

Little tip...
If you want anybody to stay on your website for longer than it takes find the back button.
LOSE THE MUSIC!!!!!
I lasted about 5 seconds before I was scrabbling to find a way out of there. I have no idea what is on the site because the only thing i noticed was the music and I had to kill that ASAP.
I HATE musical websites. I leave them immediately and never go back. Pretty much everybody i know feels the same.

4. OK THANKS for the item codes but is there a way i can convert the STB to MSExcell?.xls file format i think?

Why not just use an excel based editor then it's all in excel already?
http://forum.dev-osrose.com/viewtopic.php?f=32&t=1046
Just make sure macros are enabled and that you have comdlg32.ocx installed on your computer

[redgie]

1st so i need my STB same on client and on server files..
2nd i will just make my STB and STL same..
3rd hehehe i already removed the music box BUT can i ask something how can i put SHOUT BOX ON THE FORUMS? i know on the web site but i cant put it on forums
4th thanks for all the helps BUT

how this things work

"Just make sure macros are enabled and that you have comdlg32.ocx installed on your computer "

macros? comdlg32.ocx? sorry causei dont have a DEV thats why i want to leran all thanks in advance you really help me a lot

[Purpleyouko]

1st so i need my STB same on client and on server files.

YES. that is rose server 101 for absolute beginners. FILE MUST MATCH or you get bad things happening.

2nd i will just make my STB and STL same..

It doesn't matter what names you put in the STB. the client and server never read them anyway. Your STL is the file that defines what names the items will have in game.
If you use my editor in excel, it loads and saves both STB and STL and also has a feature that copies across all teh names from the STL directly into the STB

3rd hehehe i already removed the music box BUT can i ask something how can i put SHOUT BOX ON THE FORUMS? i know on the web site but i cant put it on forums

Glad to hear it.
Shoutbox will depend on the forums code that you are running. Most forums have available mods or plugins that you can use to install a shoutbox.

macros? comdlg32.ocx? sorry causei dont have a DEV thats why i want to leran all thanks in advance you really help me a lot

A "macro" is a sequence of code that performs a function in the spreadsheet.
In this case it opens a common dialog (file browser) window and allows you to load STB and STL files directly into the excel sheet.
Excel has security settings which, if set too high, will disable the macro so that when you click the buttons to do stuff, nothing happens. You have to set security low enough to allow macros to work.

Some computers will fail to run my macro because they are missing a dll type file called comdlg32.ocx
if yours does this then go here and follow the simple instructions to install teh file
http://www.ascentive.com/support/new...e=COMDLG32.OCX

[redgie]

thank you so much....

im not familiar with the comdlg32 so i just read it 1st before i use thos to transfer STB AND STL INTO EXCELL but really thanks.... now can i ask how can i put CG category on mildun? all my carts are working now hehehe thanks...

now i want to put CG on mildun hehehe but i dont know how to put category i mean like
-GUNS- -CARTS- then -C.GearS- like that.... then when i click the C.GearS the castle gears will show and we can buy them thanks your so much help...

[Purpleyouko]

im not familiar with the comdlg32 so i just read it 1st before i use thos to transfer STB AND STL INTO EXCELL but really thanks.... now can i ask how can i put CG category on mildun? all my carts are working now hehehe thanks...

Just download the editor and open it in excel then use it
You will soon find out if you need comdlg32.ocx or not

here is a full tutorial to add items to an NPC sell list
http://forum.dev-osrose.com/viewtopi...orial+npc+sell

[redgie]

huhuhu i cant understand..

[lmame]

Why I'm not surprised...

[Purpleyouko]

Sorry. I have no idea how to make this any simpler.
I wrote that tutorial to be as simple as it is possible to get.
If you can't even grasp how to use the editor then I really don't know what to say here.

These are beginners instructions for an entry level project to modify some incredibly simple aspects of your server/client. It really doesn't get any simpler than this.

[lmame]

I got one for him:
1

[Purpleyouko]

logging off and unplugging the computer sounds way too complicated.
Can you simplify that a bit please?

[lmame]

Sure, always ;)

He can just throw it throug the window, and then jump to catch it back (and hopefully fell on his head).

[whhacker93]

damn,i had this sorta problem to, but i could never figure out exactly how to fix it. so sorry. your own your own buddy.

[perrin9028]

Okay, since you guys aren't helping much with editing sell data; here's a guide with pictures.

Firstly, you'll need a VFS Editor, such as VFSNextGen, the editor I'll be using in this. Here's a download link for it from FileFront; http://files.filefront.com/VfsNextGe.../fileinfo.html ; If you need an alternative mirror, I'll be happy to supply one. Secondly, you'll need an STB Editor and an STL Editor. I recommend Brett's STB editor; http://forum.dev-osrose.com/viewtopic.php?f=32&t=1222 ; only because it imports the STL entries as well, but only if you have the corresponding STL files, which I won't be covering.

Anyway, once you have a VFS editor and an STB/STL editor, place the VFS editor into your R.O.S.E. Online folder and open it after scanning for viruses, because you can't always be sure of that stuff. Once you've opened it, extract the files; LIST_NPC.STB ; LIST_SELL.STB ; LIST_SELL_S.STL.



With you STB editor, open LIST_NPC.STB and find the row of your NPCs, which start in the 1000's. For the sake of saving time, Mildun is row 1096 in LIST_NPC.STB. Then find the STL entry numbers in columns 22-25 of the STB.



Next, open the LIST_SELL_S.STL with your STL editor and find the tab name you want. Take for example, Castle Gear is STL entry 492, and therefore you'd put 492 in the LIST_NPC.STB.



Save the STB file and you can close it. Open LIST_SELL.STB and find the row number that corresponds to the tab name; in this case 492. Column 1 and 2 are just descriptions, you can put w/e you want in there; Column 4 is the STL entry, put LSEL and the row number, so LSEL492. In column 3, you can start entering data. To put an item in the tab, fist place the identifier, or item type, and then the ID of the item. Felice Party Wear would be 3161 and Ego Mask would be 1121. Each row in the NPC stores is 8 columns in the STB.



If you're placing Castle Gear in Mildun, most all of your entries will start with the identifier 14, for PAT.

[lmame]

Thanks for the tutorial, but PurpleYouko linked to the one he did too. That's why we went into "suicide yourself" mode :)
Anyway, perhaps Redgie will understand yours ;)

[Purpleyouko]

Mine has all the pictures too.
Every tiniest detail is covered in it.
Maybe he will find brett's editor simpler than mine. I certainly hope so.
My editor does STB and STL too. It also parses the STB and imports the names from the matching STL. All that stuff is fully covered in my tutorial.

[redgie]

sorry guys i just got home from vacation... what i meant to say is that i dont understand how to make the own ITEM ID list... not to sell and change the prices... but thanks guys