- MaNGOS ~Amber~ Releases 3.x.x

[cruiselee]

I have a quick ? if anyone can awnser it for me, I downloaded and installed everything installed great, but I load up wow and loggon and select realm and it say's connected for about 10-15 sec's then disconnects me from server, I have went on to create multiple realms and all of them do it, can someone please help?

[mshep]

I have a quick ? if anyone can awnser it for me, I downloaded and installed everything installed great, but I load up wow and loggon and select realm and it say's connected for about 10-15 sec's then disconnects me from server, I have went on to create multiple realms and all of them do it, can someone please help?

Hi Cruise, This sounds like your realm is up but your world isn't (or you can't connect to it).
Could you please provide a little more information.

Have you opened the ports on the windows firewall on your server? Have you configured the correct IP in your Realm DB? If you are running the client and server on the same PC then it should just work...

Have you looked at the console screens to see if you have any errors?

Sorry for the rather vague response, but there are a lot of reasons this could happen and it would be useful to know a bit more about your setup .

Cheers,
Mike...

[crixxu]

thank you shiva from vienna. great work. keep going.
greetz, crixxu

[ninofarino]

It has been answered before about not being scripted yet into the core and this is correct. The way to get pass that one quest is to type .quest complete 12641
That will allow you to complete the quest to continue on.

Hope it helps,

WyCKyD

Hi Guys,

I will be doing a similar DK walkthrough for v8035, but in a manner in which a non GM player can complete the entire quest runs...will include auto completion of bugged quests, and teleporting to required locations after accepting quests which cannot be completed due to teleportation bugs.

It's just that autocompletion of quests changes the quest structure and introduces new problems.

Keep you posted.

[ninofarino]

I have wow wotlk 3.1.3.9947 enGB client . This is not good client ?
And if i use extractor ... extractor extract only dbc and maps but no vmaps .

Hi,

I use the same setup, and have not had any problems.

[silvermcd]

well shivajiva i hope the next release have some spell fixes for the core, there's so many bug abuses :S

i think that's the most important right now

[apolon]

I have last mangos Amber v8035 Mangos 3.1.3 but on console with i login to my char is tape this error

SESSION: received not allowed opcode UMSG_UNKNOWN_1203 (0x04B3)

for what is this error and how i fix thanks

[shivajiva101]

If you could be more specific that would be great. I'm sorry I just got back into this so I'm not entirely fluent in mangos/sql hehe. I honestly don't know which file is affecting it. I just know that making a new account row, copying the row from the old account into the new account minus name/pass, and making ownership of her characters transfer to the new account makes the problem go away, but only until a server restart. Even with a GM .saveall command ingame while the toon is active and working correctly.

I could try making a new account and only transferring character ownership to the new account, but I think it is something with the character specifically that affects the whole account that it is on. Originally, she logged out right after res'ing, and when logging back in it showed her still dead for like 10 seconds, then it popped her alive then the issues happened. There are several accounts on the server and only this one has the issue. Figures that out of all the people playing, the only one having an issue is the one I need to fix most, my fiance's lmfao.

She was only lvl 24 on a server with 10x rates, so if we can't find a reason, then I will just make a fresh account and leave it blank and have her start over. It's not a big deal, I just wanted to be prepared in case this issue spreads to more accounts. Thanks for your time.

Im suggesting you use sqlyog or similar to import the 2 sql's found in \sql\tools as they target possible corruption of the characters stored in the db, it was just a thought, as Im sure its not the account but her character data thats causing the problem...importing the sql's will clean all chars in db and are provided for maintainance. Use google if you need a step by step on importing sql's using sqlyog.

I have last mangos Amber v8035 Mangos 3.1.3 but on console with i login to my char is tape this error

SESSION: received not allowed opcode UMSG_UNKNOWN_1203 (0x04B3)

for what is this error and how i fix thanks

Is this affecting the running of the server? If not don't worry about it as the error messages are for the dev's to fix...

[wowit]

Hmm...have you tried importing the files in sql\tools to fix the bad account?

somethings wrong....no seriously It will cause problems and suggests the previous installation wasn't entirely successful as it should have renamed that column to the title now stated as missing...pls check table in db and post what the title actually is, as this will provide furthur clues...

thanks for replying...
i am a little unsure what you are sugesting is nammed wrong..
i loaded the character db and there is a table called character_pet just seems like normal data in there..

a little prod (or a big stick) in the right direction would be appreciated...

on another tact ,,, as my current instalation is the full pack 7624 then all the updates applied i guess the failed update could of happened an any of them..
would it be worth exporting the current active characters then to do the last full 3.0.9 7899 then do the 7899 to 7928 then importing the characters back in then doing the 3.1.3 update ?? just a thought

[max.q]

Hi,

I have some kind of problem with the latest full installer 8030 for wow 3.1.3 - during the installation process there pops up an error saing, that there was an error and fail of creating W: drive - that .. something (I can't read that error correctly) is not in naming of inner nor outer command, executable program or batch file. Than the installation wents down, the process is stopped and uninstaller comes out...

What's wrong?

[09:23:46] Loading settings from amber.ini...
[09:24:06] Error: Failed to create W:
[09:31:35] Checking ini file for redundant entries...
[09:31:35] Error: app failed @ exitOK check! Please report bug!
[09:31:35] Installer encountered a fatal error and must terminate...

[hellxfire]

Could you fix this? Characters get stuck in a crashloop when you teleport to Dustswallow Marsh.

do .tele sw
walk around a little, walk into the water

wow will crash. everytime you try to log in your client will keep crashing.

[silvermcd]

Is this affecting the running of the server? If not don't worry about it as the error messages are for the dev's to fix...

yes is affecting can't log on char's sometimes

[Diabolix]

Hey can you leave the DK area with the new release (support for 3.1.3) ?

[WyCKyD]

not yet. There are still a few things not fully working and some items missing. I am working on the items now. If you would like to see the few things fixed faster, help with the development. Just my thoughts.

[mshep]

If you would like to see the few things fixed faster, help with the development. Just my thoughts.

Nicely said

[Hokarr]

Just dropped these lines here to say thanks for this AWESOME repack!!

I'm new to the whole wow-private-server-thingy, and setting up my first 3.0.9 mangos server was a pain in teh @ss.

Then looking for a newer patch i found your repack and so i decided to switch to that al together and go for that.

I was TOTALLY BLOWN AWAY by the fact that it installed FLAWLESS on the first run, i only had to stop/remove old mysql/apache services etc.
Even the website, minimanager, everything worked, automatically......amazing!
(This way i don't even have to learn anything and can remain safe in my comfortable noobish state )

Too bad that as far as i could notice DK's Quest are more bugged(read incompletable as player), and Ebon Hold and surroundings seem less 'alive' compared to the old (3.0.9) repack i used, but who's complaining, i still love it!
Keeping an eye on this for updates

[faciopl]

hey guys i have 2 questions
1.How to change password in start.bat
2.How to edit page (news,pictures,...)

[faciopl]

hey guys i have 3 questions
1.How to change password in start.bat
2.How to edit page (news,pictures,...)
3.How to fix this error and tell me how to make this maps to work correctly... (wow US)



2009-06-30 10:11:36 MaNGOS/0.14.0-DEV (* * Revision 8035 - 3741f64fad6389ed954accd4bfebd490ab81518a) for Win32 (little-endian) [world-daemon]
2009-06-30 10:11:36 <Ctrl-C> to stop.

MM MM MM MM MMMMM MMMM MMMMM
MM MM MM MM MMM MMM MM MM MMM MMM
MMM MMM MMM MM MMM MMM MM MM MMM
MM M MM MMMM MM MMM MM MM MMM
MM M MM MMMMM MM MMMM MMM MM MM MMM
MM M MM M MMM MM MMM MMMMMMM MM MM MMM
MM MM MMM MM MM MM MMM MM MM MMM
MM MM MMMMMMM MM MM MMM MMM MM MM MMM MMM
MM MM MM MMM MM MM MMMMMM MMMM MMMMM
MM MMM http://getmangos.com
MMMMMM


2009-06-30 10:11:36 Using configuration file mangosd.conf.
2009-06-30 10:11:36 World Database: 127.0.0.1;3306;root;mangos;mangos
2009-06-30 10:11:37 MySQL client library: 5.0.56
2009-06-30 10:11:37 MySQL server ver: 5.1.23-rc-community
2009-06-30 10:11:37 Character Database: 127.0.0.1;3306;root;mangos;characters
2009-06-30 10:11:37 MySQL client library: 5.0.56
2009-06-30 10:11:37 MySQL server ver: 5.1.23-rc-community
2009-06-30 10:11:37 Login Database: 127.0.0.1;3306;root;mangos;realmd
2009-06-30 10:11:37 MySQL client library: 5.0.56
2009-06-30 10:11:37 MySQL server ver: 5.1.23-rc-community
2009-06-30 10:11:37 Realm running as realm ID 1
2009-06-30 10:11:37 Using World DB: UDB 0.11.5 (381) for MaNGOS 8030 with SD2 SQL for rev. 1143
2009-06-30 10:11:37 Using creature EventAI: ACID 0.1.0 - Full Release
2009-06-30 10:11:37 Using DataDir ../Data/server1/WOTLK/
2009-06-30 10:11:37 WORLD: VMap support included. LineOfSight:1, getHeight:1
2009-06-30 10:11:37 WORLD: VMap data directory is: ../Data/server1/WOTLK/vmaps
2009-06-30 10:11:37 WORLD: VMap config keys are: vmap.enableLOS, vmap.enableHeight, vmap.ignoreMapIds, vmap.ignoreSpellIds
2009-06-30 10:11:37 ERROR:VMap file '../Data/server1/WOTLK/vmaps/000_43_31.vmdir' is missing or point to wrong version vmap file, redo vmaps with latest vmap_assembler.exe program
2009-06-30 10:11:37 ERROR:Correct *.map files not found in path '../Data/server1/WOTLK/maps' or *.vmap/*vmdir files in '../Data/server1/WOTLK/vmaps'. Please place *.map/*.vmap/*.vmdir files in appropriate directories or correct the DataDir value in the mangosd.conf file.

[plince]

Thank you very much! nice job! really appreciate your hard work. :)

[Hokarr]

hey guys i have 3 questions
1.How to change password in start.bat
2.How to edit page (news,pictures,...)
3.How to fix this error and tell me how to make this maps to work correctly... (wow US)



2009-06-30 10:11:36 MaNGOS/0.14.0-DEV (* * Revision 8035 - 3741f64fad6389ed954accd4bfebd490ab81518a) for Win32 (little-endian) [world-daemon]
2009-06-30 10:11:36 <Ctrl-C> to stop.

1 - dont know what you mean here? default is administrator - administrator for admin!
2 - everything about editing the page can be found in README.txt in folder yourdrive:\\mangos\v8035\diskw\www\
basically you have to create some forum to show content and edit yourdrive:\\mangos\v8035\diskw\www\CONFIG.xml for finetuning/configuring
3 about the maps, make sure they extracted from a proper client (9947), otherwise it should be working automatically (at least it did for me)
Doublecheck the paths in CONFIG.xml!

More info on various manual installs of parts of this package can be found in readme files and/or by the heavily commented php files.

I found this one bug with the forum/topic ID codes and how they work with the Frontpage News, bugtracker and faqpage.

I cant seem to change the ID numbers with admin panel->forum so i had some trouble getting the info i wanted to show up on the frontapge.
No biggie, just had to view the links of the topic in the forum to get the proper ID and manually change CONFIG.xml to the corresponding ID-numbers

[nash33]

hi,

i've a problem with the auction house bot. he is corectly activated but the item list is empty....
thanx for your help.

[I_Am]

Is it possible to extract the dbc,maps,and vmaps via a network drive?

[Simbian]

Hey... ...
Im new to MaNGOS and I like it!!! xD
But I have a question...
How to put this "UDB 0.11.5 CS380 + MaNGOS 0.13.0 v7899" version online with HAMACHI ...just to play PvP with school friends???!
Thx...and pls answer :)
MaNGOS FTW :D

[mantha]

hi,

i've a problem with the auction house bot. he is corectly activated but the item list is empty....
thanx for your help.

u can use this 1

.ahbotoptions minitems,.ahbotoptions maxitems

it should work

[I_Am]

My wow client is 3.1.3.9947 and when I extract the maps I get

Map file '../Data/server1/WOTLK/maps/0004331.map' is non-compatible version (outdated?). Please, create new using ad.exe program.
Correct *.map files not found in path '../Data/server1/WOTLK/maps' or *.vmap/*vmdir files in '../Data/server1/WOTLK/vmaps'. Please place *.map/*.vmap/*.vmdir files in appropriate directories or correct the DataDir value in the mangosd.conf file