Printable View
They're even in the second post (by the directions) =\Quote:
Originally Posted by crxfreak
---------- Post added at 02:49 AM ---------- Previous post was at 02:47 AM ----------
They sure were (as I've not changed pwAdmin versions since initial release)...Quote:
Originally Posted by Psytrac
I missed that somehow, my appologies.
I am still getting lvl 0 chars after yet another reinstall. I seriously doubt it's just me at this point.. I re-installed from a BLANK Hard drive file
Well, no one else has confirmed theirs behaving the same way. That and, I cannot replicate this no matter how hard I try. So, so far, yes, you are the only one, unless someone else steps forward or I can replicate it myself...Quote:
Originally Posted by Psytrac
I am staring to think this release just hates me.. I'll have to dig about the defalt templates and see what may be up (once I can find them..)Quote:
Originally Posted by 343
Psytrac you could just install the server from ronnys guide and then replace the maps and .data from 343's release, practically the same thing, just changing the server configuration and webserver etc etc but you could of course add them in too
---------- Post added at 08:15 PM ---------- Previous post was at 08:11 PM ----------
And also, it could be a problem with the hardware, I was having very weird and annoying errors (corrupting files, crashing maps, segmentation faults etc) and it turned out to be I had channel A and B RAM and I had them in the wrong spots.
So it could be your computer problem, have you tried installing it in a virtual server on another computer?
Quote:
Originally Posted by 343
I tried that before, just made more peoblemsQuote:
Originally Posted by NaMeLeS
about hardware: its virtual, how could that be the problem?
The hardware on the computer you are running it virtual in...
Got another computer you could try it on? Just to see if it works, if not, redownload the package
Also I suggest trying another vm program eg if you are using VMware try Vbox
md5 is correct, it's not a corrupt ISO.and no, I dn't have another PC fot it. but once again, previous release worked fineQuote:
Originally Posted by NaMeLeS
I have tried vbox, no difference
Not even a computer you could borrow to try temporarily.
I really don't see what the problem could be other than the hardware, no one is having this problem and it's not like you are doing anything wrong, pretty straight forward install.
I know... it's like the server files just said "Psytrac, we hate you" and refuse to cooperate with me :@Quote:
Originally Posted by NaMeLeS
and no, there isn't another PC I could use
Maybe try zeroing your drive (or if/since you're using VM start a total new VM [don't re-use the 'drive' file])Quote:
Originally Posted by Psytrac
---------- Post added at 05:24 AM ---------- Previous post was at 05:23 AM ----------
I'm running out of suggestions =\
And sorry if you have already answered this, but what distro of linux are you using?
I am using ubuntu server (desktop/gui makes it unstable) 11.04 and it works fine
@343: I already do this, I delete the VM before installign a new one. like I said though, it wasworking 100% fine in your previous release. so somethign must have happened to THIS release
@nameles: ubuntu-10.04.3-server-i386.iso
OK now i have dload and follow everything from the guide.. Darn this really hates me.. When i try to navigate myself to the server ip (192.168.1.4) and it ask for Username/password.. What is wrong here? i have try to put the server /root password and username and i dont remember i set the password other than that...
Anybody can tell me what is the problem?
Anyway i install this on a physical machine not a VM.
---------- Post added at 08:05 PM ---------- Previous post was at 08:04 PM ----------
i can ping and i can navigate myself to 192.168.1.4 ( and that is the register page) but i only cant go to pwAdmin page.
do you go to http://192.168.1.4:8443/pwAdmin ?
The information you seek is in this post:Quote:
Originally Posted by taiko
http://forum.ragezone.com/f694/compl...2/#post6233360
Thnx 343, i will get back here and tell the results tomorrow as it is 2am here at my place.. need to sleep.Quote:
Originally Posted by 343
---------- Post added at 09:55 PM ---------- Previous post was at 09:54 PM ----------
will try that tomorrow also.. thnx Psytrac.Quote:
Originally Posted by Psytrac
What version of PW is that btw ?
Kind of puts me in mind of this quiz.Quote:
Originally Posted by taiko
Directions: You have a 5 minute time limit to complete the parts of this test. Carefully read all of the parts of the test before doing anything. In order to ensure the accuracy of this exam, you should not use more than the allotted time of 5 minutes. You may start the timer and begin whenever you choose. Good Luck!!
You may begin now!!
1. Write today's date--month-day-year in the top right hand corner of your test paper.
2. Write the answer to the following multiplication problem directly underneath the date on your test paper--6 X 5 = ?
3. Write the name of the month that begins with the letter "D" in the top left hand corner of your test paper.
4. Add 15 to the answer you got in part #2, and write this new total directly underneath your answer for part #3.
5. In the lower left hand corner of your test paper, write the names of your favorite singer and your favorite group.
6. Just above your answer to part #5, write "This test is very easy."
7. In the lower right hand corner of your test paper, draw a rectangle and inside the rectangle draw a five pointed star. The size of these drawings is not important.
8. Directly above your answer to part #7, draw a row of three small circles. Once again, size is not important.
9. Write the name of the first president of the United States on the back of your test paper anywhere you choose. If you don't know who this is, write your own name instead.
10.Write the name of any country that begins with the letter "I" directly underneath you answer to part #2.
11. Take the number of dwarfs in the Snow White story and add it to the number of bears in the Goldilocks story. Divide by 2. Write this total in the approximate center of your test paper.
12. Think of a number between 1 and 50. Double that number. Add 20. Add 6. Subtract 17. Subtract 9. Divide by 2. Write this number on your test paper directly underneath your answer to part #11.
13. Now that you have carefully read all of the parts so far, and you have not carried out any of the actual work, read the next 2 parts just to see what they say and then go back and only complete part #3.
14. The name of the first president of the United States is George Washington. He was president from 1789 until 1797. Add the 2 dates together to see if the total is less than 5000.
15. You should not be reading the end of the exam before the beginning of the exam, but now that you are here, you have just wasted some of the time you may need to complete the test.
Thnx 343, i think is don't read all the info again after your latest release and i use this Username and pass to accessQuote:
Originally Posted by 343
Quote:
.htaccess (/opt/lampp/security/restricted.users & restricted.groups) = username:pwAdmin password:root
---------- Post added at 11:16 AM ---------- Previous post was at 11:12 AM ----------
and i got the same problem like yours, and i fix it by giving the 777 permissions in 'java' file inside this path.Quote:
Originally Posted by HeavenOnlyWishe
go to your /PWServer/authd/authd to check your java directory.Quote:
/usr/java/jdk1.6.0_12/bin/java
Hey 343, have you noticed that Venomancer's can't see what pets can be tamed, since the taming symbol on monsters is missing now? Just wondering what's up with that, and if there is a simple way of fixing it.
I don't think that our server/client ever supported that. At least I don't remember it. It may be a newer thing (age of spirits expansion is latest I can be certain it existed)Quote:
Originally Posted by HeavenOnlyWishe
No, it always been there. And I can see which mobs I can tame (using older 343 release as a base), maybe it's interfaces.pck issuse?
It is something that has been in PW since it was first made, and I'm going to check into the interfaces and surfaces to see if it has anything to do with them, but today is my birthday so I'm taking the day off work. Just thought I would throw it out there so he knew that there was an issue with that.
Psytrac, the last 343 release worked alright?
Why can't you just use that and replace the PWServer folder or gamed folder with the latest ones?
Yea, he's gonna have to start really digging into it himself... I am now working on adding Q20 -- which I will probably 'pop out' an update as soon as I finish that since I wasn't planning an OCT release 'update'... (no reason to make yall wait till OCT for my Q20 :laugh:)Quote:
Originally Posted by NaMeLeS
---------- Post added at 12:26 AM ---------- Previous post was at 12:25 AM ----------
... ok gotta tear myself off the board *slaps self with whip* BACK TO WORK
:lol: BBL
Ugh, I was afraid of this, the issue with the monster taming icon is in the Interfaces.pck.... Guess I'll have to sort through it and figure out whats wrong. Never toyed with the interfaces before, but I'll let you know what I find.
k thank you :)
(still grinding away at crankin' out Q20)
343 I have found several ERR's inside the map, not sure which pck files would be missing from though. Just thought I would give you a heads up on it.
I am done with the map part now -- I was only able to locate 3 ERRs (all in one room)Quote:
Originally Posted by crxfreak
Why the game client has to weigh so much? You did not try to optimize elements and throw out all unnecessary, that is not used.
I suspect that a lot of textures just hangs in the pck-files and they are not involved, but take up much space. Hence the dramatic increase in file size.
Missing models. Open q20.ecwld with notepad++ (turn on simplified chinese encoding) and find the needed .ecm for that map inside the Legend of Martial Arts models.pck then add them into the PW models.pckQuote:
Originally Posted by 343
It contains additional 1 LOMA and 1 Jade Dynasty map, so 343 had to merge clients from those 2 games, because it's difficult to find out which files particular map needs (in my opinion it's not worth it, I would just update the client to 1.4.4 - because the client models are still 1.4.2...)Quote:
Originally Posted by Deron
Previous release I think, too, was overstated by file size.
If you do the optimization, I think the size of the client is reduced by 1.5 times, if not more.
I know what it is -- I don't have LoMA though, so these will most likely remain -- cuz I sure in the hell aint downloading LoMA for 3 stupid ERR models :pQuote:
Originally Posted by Romulan
---------- Post added at 04:03 AM ---------- Previous post was at 04:02 AM ----------
No the release does not yet contain the LoMA map -- I am putting that in as we speak...Quote:
Originally Posted by avalanche3
---------- Post added at 04:09 AM ---------- Previous post was at 04:03 AM ----------
Quote:
Originally Posted by Deron
I am not looking to make the smallest or most compact client here. This is intended as a BASE release (so yes, there are things that aren't "used") so that people can easily add them / customize whatever they want...Quote:
Originally Posted by Deron
If you don't like it, you don't have to download it :ott1:
Your releases some of the best, I like them and I'll download them. Job well done :thumbup:.Quote:
Originally Posted by 343
But not all high-speed Internet, and download a huge amount of very long (just this reason). If offended - sorry, just asked a little question :wink:
Now I think, what and where to remove excess (a very difficult task for me)...
I apologize if you took my response the wrong way... I have been working hard on q20 for several hours now and I'm almost cross-eyed LOL... I thought you were saying it's not good though because the client is too big, but must have just been a small mis-intepretation on my part -- sorry; glad you like the release :thumbup:Quote:
Originally Posted by Deron
343 your release is awesome, and I feel you, as I got it working just about an hour ago. Again thanks for all the help getting me headed in the right direction. Now just need to figure out what I'm doing with it. The job never ends.
Yea hence the whole "base release" concept I have -- I will be leaving the instance itself empty (like I did with z9 and the t/b and e/g areas) so that each individual can customize it however they want...Quote:
Originally Posted by crxfreak
However I will be adding an NPC that will bring you into it (that's what I'm working on right now)...
---------- Post added at 05:24 AM ---------- Previous post was at 04:46 AM ----------
I do appreciate the 'tip'/help; but it would also be more efficient to read the client logs ;)Quote:
Originally Posted by Romulan
---------- Post added at 06:09 AM ---------- Previous post was at 05:24 AM ----------
well according to my AF log I am missing this file (x3):
Models\场景动画模型\蜘蛛蛋\蜘蛛蛋.ecm
and this one (2x):
Gfx\场景\石柱效果蓝.gfx
anyone have LoMA client, or know of a way I can just 'remove' these from .ecwld ???
that would be a great idea.. if I still HAD the old server ISO. I deleted it assuming this one would workQuote:
Originally Posted by NaMeLeS
(yes, I just got on now. 6am Sunday morning)
@343: any chance you would humor me and upload a "working" VM I could test with? (as in one you created from your own files and is working properly)
I'm not sure about that, it would be a HUGE upload. I would almost humor you by just driving to your house, bearing in mind you do only live about an hour away from me :laugh:Quote:
Originally Posted by Psytrac
But in all seriousness I am working right now pretty extensively on adding q20 to this release... Sometime when I'm done with that though perhaps I could give you some assistance via T/V -- I'll PM you later whenever I'm 'free'...
---------- Post added at 07:39 AM ---------- Previous post was at 07:38 AM ----------
...don't know for sure if it'll be today or not though, but I'm hoping to wrap up what I'm doing either today or tomorrow...
I have to figure in sleep somewhere (still haven't gone to sleep :(:)
---------- Post added at 08:26 AM ---------- Previous post was at 07:39 AM ----------
NVM I'm just gonna download LoMA =\Quote:
Originally Posted by 343
that might freak out a few people living here :P and it souldn't be "huge" of it's compressed with 7z or rar, that's about as tiny as it gets (generally I use 12gb VMs)Quote:
Originally Posted by 343
and I dare ask, in hour in which way LMAO, I may actually be closer to you than you think sometimes :P
and TV is good too, just lemme know bro
Hi i have a slight problem...i fast forwarded the server time to 6:45 wednesday to test the TW function and all went well with bidding.
Then 4 of us decided to try out the BH in TT 3-3
The problem is when we start TT all the mobs disappear to the ceiling including bosses.
I was wondering what i could've done to cause this and if you or anyone else have encountered this problem?
Im thinking it may be something to do with me fast forwarding the server by that few days but im not sure...any ideas would be greatly appreciated.
BTW thank you very much for your new release...we are happily playing and keeping eyes peeled for your "easter eggs":w00t:
:thumbup:
I know you said you were just going to download and install it, but here are those files.
Attachment 92407
If only I knew how to spell "parts" properly, woops.
FYI the ERR's are wiggly spider eggs
Thanks, but I had finished it last night before I passed the hell out... Also you're missing the 'textures' inside gfx ;) (in the file you u/l'd).Quote:
Originally Posted by crxfreak
---------- Post added at 04:41 PM ---------- Previous post was at 04:37 PM ----------
I will look into TT/HH now, I could have sworn I had 'proper' height maps in there =\Quote:
Originally Posted by argonaut
Alright so I figured out where the issue with the monsters not having the taming icons is, it's in hpother.dtf and hpotherb.dtf.... Naturally....
Anyway, where it says: IMAGEPICTURE "Img_PetLevel" "" "" -2000 -2000 16 16 0 0 "" -- change the -2000 -2000 to 88 39 for hpother.dtf and 86 38 for the hpotherb.dtf.
This should fix the missing monster tamable icon.
Enjoy! XD
P.S. For those who aren't used to editing the interfaces, the first value I said to change adjusts the object horizontally on the screen, a lower number being towards the left and a higher number being more to the right. And the second value being the adjustment for the vertical axis, a higher number being lower on the screen and a lower number being higher on the screen.
Thank you I will attempt to get this into the next 'update' ;) :):
You might also consider removing the LABEL "Txt_HP" lines from the hpother.dtf(line 19) and hpotherb.dtf(line 22), to remove the stupid ?/? in the monster's hp HUD, I think a lot of people prefer to remove it anyway, unless you intend to fix it so that it shows hp properly at some point.
I'll just comment them out ;)Quote:
Originally Posted by HeavenOnlyWishe
---------- Post added at 05:35 PM ---------- Previous post was at 05:34 PM ----------
&
ahhhhhhhhhh, you're talking about the genesis interfaces :laugh:
I just unpacked my normal interface and didn't see any problems in it...
Ok, I'll still fix it in genesis interfaces by the next 'update' :)
---------- Post added at 05:38 PM ---------- Previous post was at 05:35 PM ----------
ok done ...
---------- Post added at 05:40 PM ---------- Previous post was at 05:38 PM ----------
No, 'fast forwarding' time would not cause mobs to fall through the floor or jump through the ceiling... Unlike players / player models (which DO pay attention to LITMODELS) mobs bosses and what not only pay attention to heightmaps -- so my guess would be it's a height map problem =\Quote:
Originally Posted by argonaut
Here is another version of the Genesis Interfaces:
Genesis Interface
List of Fixes:
- Removed the ?/? from the monster HUD
- Fixed the tamable icon on the monster HUD
- Fixed character window class and title placement
- Server listing, fixed the title and sub-title
- Login screen, server display, server button, exit button, and texts
- Character creation screen, titles and sub-titles
Ok, I have also resolved the server height map for a31 (tt) for the next 'update' ;) :):
Ok, I'm not sure that I'm going to wait for the 4th for the next 'update', so...
Please provide any input/'bug reports' etc... now ;)
Hi again, i thank you for looking at the TT mobs height problem as this has greatly put my mind at ease knowing i didnt stuff something up in all my experimentations.
I do have an incredibly noob question and i really have read all your tutorials (which are very informative) and i have read through all the threads in this massive forum which has helped immensely with understanding.
I am struggling with a couple of basic things in CPW and seek clarification before i noobily make destruction of my server,
STEP 1) FULLY UN-PACK CLIENT AND PLACE IN:
/opt/cpw/files/new/
is this the new or old client going in here?
STEP 2) RUN BASE BUILD:
./cpw initial
STEP 3) TO CREATE PATCHES - PLACE NEW FILES IN:
/opt/cpw/files/new/
What new files? I thought i already placed them here previously?
Sorry but im confused because i thought by placing the new client files in /opt/cpw/files/new/ is updating the server side and client but now it says in step 3 to place new files which i assume i did in step 1...
I do understand i have to unpack all 14?(counted earlier quickly) of the .pck and place in correct directories in unpacked form but im confused from part 3 saying again to place new files to create patch.
Sorry about my noob questions..i think when i understand this part i will feel confident enough to update.
Eagerly awaiting your update and replies:thumbup:
Oo i just realised...b4 the rebuild new files go in to update server side..and after rebuild new files go in again to update client side?..is that right?
They aren't really that noob, I had some of the same questions not that long ago.Quote:
Originally Posted by argonaut
uhm well how CPW works is--you add your full unpacked client to /opt/cpw/files/new then you run the initial build
Well (you'll notice when you go in there to make an 'update') that -- once you run initial build the files are no longer there (in new) [it moves them where it needs them]
so now to create a patch you put any new or changed files in NEW (again just like for 'initial' build)[though you do NOT have to add the WHOLE client for every patch, it has those already stored where it needs them]
run the cpw revision/new to build a 'patch'
same thing, next time you go to update, you'll again notice NEW is empty again (because it took them and put them where it needs them)...
rinse lather and repeat...
Wow thank you very much for your quick and helpful reply crxfreak.
I have 1 more question regarding the revision being made..when the revision has been processed it will automatically update my friends clients'?..i read the last part involving .cup files patch creation and assume this is an alternative way to update and is different from CPW (im sticking with CPW)
Again tyvm for you support :)
Yes, when your players connect it will say 'update available' automatically or just automatically update it for them (depending on their settings, and provided they are launching their client through the patcher [ofc] and not directly launching their client)...Quote:
Originally Posted by argonaut
Wow again...you guys rock and roll, many thanx 343.
Thanks, any other 'input' or 'bug reports' for this pending release 'update' ???
---------- Post added at 10:43 AM ---------- Previous post was at 10:43 AM ----------
before I get ready to pack it all up and ship it all out again ;) :):
---------- Post added at 11:05 AM ---------- Previous post was at 10:43 AM ----------
Thank you for these little fixes :) I find it really tedious sometimes to work on two interfaces (and I do personally prefer the old one) :thumbup::thumbup1:Quote:
Originally Posted by HeavenOnlyWishe
lol how about giving me a few days to find any :P (you knwo full well it JUST started working today :P )Quote:
Originally Posted by 343
oh.. and um.. warsong/nirvana if possible? (mostly warsong)
EEW noQuote:
Originally Posted by Psytrac
---------- Post added at 11:29 AM ---------- Previous post was at 11:27 AM ----------
imo two JOKES of instances
I can tell how fucking lazy PW developers are -- warsong comon RE-USED misty city
nerd-vana reused and raped hall of blasphemy
sorry, but nty I think those two instances are an insult to real/original PW...
granted, but warsong would be good to learn about. seeing as I'll have to be going in there soon my my sin on the real servers (so I could use the practice)
also I noticed your server doesn't have the warsong molds/weapons. why not?
Lol sorry, you'd have a better chance at me taking you on the real server -- it aint that hard :p
please do? :PQuote:
Originally Posted by 343
Too bad we don't play on the same server :ott1:Quote:
Originally Posted by Psytrac
I agree... at least warsong has interesting ncpgen and quests and it's VERY difficult. It could be great instance if they gave some interesting reward... because they aren't worth shit :/Quote:
Originally Posted by 343
And Nirvana is a joke, they cut passages and put only bosses... boring easy
Yep exactly...Quote:
Originally Posted by avalanche3
Granted I will probably feel dumb after saying this IDC (it further pushes my point)
at first I didn't even think nerd-vana was old hall of blasphemy they raped it so hard ! I really though nerd-vana may have been new
UNTIL I open actual images of the map for HoB and NV and hit alt-tab real quick
That's when I realized how badly they raped it
f#$^ those lazy asshole developers (ALL of us HERE do a BETTER job than THEM !)!
figures.. :grr::grr:Quote:
Originally Posted by 343
OH YEA, and notice our (latest) "NEW" instance is recycled FB 19 caves
(PV) WTF talk about #$%@#$@#$% lazy #$%#@$%@#$%
yes, we do need something NEW, but they're too lazy rolling out useless crap (thankfully thought MAYBE they'll fix stryen.. then make FC return to what it was)Quote:
Originally Posted by 343
Yea and hopefully DELETE everyone that hit 105 (except the first two)... it's @#$^&@@! crazy now we have OVER 210 lv 105sQuote:
Originally Posted by Psytrac
and you KNOW they used the dragoon method to get there...
I know 2 or 3 personally. I know one that hit 101 with dragoons, but his main was already that high so it wasn't a big deal lolQuote:
Originally Posted by 343
still IDC
I'm old school I guess but I say (if I ran the company anyway) it would be time to hit the button - DELETE
banning naa - cuz once the ban is over they can come back and still have the char they cheated to get.. naa just delete :laugh:
---------- Post added at 11:51 AM ---------- Previous post was at 11:50 AM ----------
and don't get me wrong I'm not jealous I CHOSE not to abuse that, because I'm old school
I leveled to 101 100% old school all questing and grinding
I did not do a SINGLE FF until I was 101 and even now I have only done enough that can be counted on one set of hands (10 or under)...
With ya there. 105s *POOF* goneQuote:
Originally Posted by 343
PWi official is sinking to the level of private servers =\ they're like an official private server in my eyes now, it's all about how QUICKLY you can get to 105, and how much MONEY they can make :((
so sad... which is why one day I WILL open a 1x private that WILL NOT even accept donations :D: :thumbup:
---------- Post added at 11:55 AM ---------- Previous post was at 11:53 AM ----------
THAT will be a server that is OBVIOUSLY about THE GAME (not money and BS)
:behindsofa:
PW is an official 1.4.4 pserer. but to make matters worse, they don't even work on or monitor the gameQuote:
Originally Posted by 343
and I call shannigans: "I did not do a SINGLE FF until I was 101"
there were quests IN fC at lvl 75 lol
No I didn't and I don't give two shits if you don't believe me :ott1: I purposely stayed away from it because people LIVE IN THERE yuckQuote:
Originally Posted by Psytrac
---------- Post added at 12:02 PM ---------- Previous post was at 12:01 PM ----------
BUT I can tell you I feel a LOT more accomplished about BEING 101 than some asshat who lived in FF to get there :ott1::ott1:
---------- Post added at 12:02 PM ---------- Previous post was at 12:02 PM ----------
no offense intended if you're one of those 'asshats' :rofl:
Hey.. lvl 80 on psy without FC tyvm.. (save the FC quests) Sin is one of those "asshats" but I don't care, it's for farming lolQuote:
Originally Posted by 343
that's cool I was only talking about my main
all my alts, LOL will prolly live in FF LMFAO
70 veno, no FC, 80 Psy (since a week after release. now 86). sin is 90 (fc'd at 60), seekrr is FC'd to 64 (from 5) lolQuote:
Originally Posted by 343
tbh old frost was better
Green frost gear is comparable to hh90 (heck it even has higher base stats) and gold frost easily rivals hh90 only being surpased by cv and hh99 (both of which were quite a bit harder to get at the time old frost existed, old lunar was insane as well)
By the way 343, is there a way to use the CPW to remove unneeded files? Like say there are extra graphics inside of the models.pck that you want completely removed from the game, can this be done somehow? (Made a nooby mistake, got into a rush last night for an update and accidentally uploaded the interfaces.pck instead of each individual file, now my player's client is crashing, had to repack the files and give it to them manually to fix it, but now this might affect anyone who joins....)
And your welcome, I use the Genesis interface for my server, so I'll be continuing to update it. When I make a more updated version I post it here for you along with notes on what I did.
I know this is possible, but tbh I don't know for sure how how to do it =\ Hopefully someone that does will chime in :)Quote:
Originally Posted by HeavenOnlyWishe
and - awesomesauce...
I use this interface as well, the only issue I see with the one you uploaded was the horizontal quickbar. It does not stay in the position that it was left, ie I normally move mine to the center, however on log out it moves back to default. I have semi fixed this however it adds a background behind the bar.Quote:
Originally Posted by HeavenOnlyWishe
Attachment 92451
This was accomplished with an xml.
That's really weird mine stays where I put 'em ...
hmm how can i make a soundtrack list for the zone music??
It did on mine also until applying the genesis ui.Quote:
Originally Posted by 343
I'll test mine now with G/I...
---------- Post added at 06:02 PM ---------- Previous post was at 05:58 PM ----------
Nope, still stays where it belongs...
---------- Post added at 06:03 PM ---------- Previous post was at 06:02 PM ----------
http://forum.ragezone.com/f452/need-...8/#post6524360Quote:
Originally Posted by CULOBG
yeh i saw that... also asked there but no reply... bgm(music) [3] doesnt seem to work neither bgm(music) 1,2,3 and neither bgm(music)=1,2,3
Weird, not sure why it does it.
I don't understand what you're saying at all
this works, and is how it is controlled (in precinct.clt (the .sev / server side does not even contain this info so no need to 'export' to server for this) the number 3 in the 'top line' denote there will be 3 lines for BGMs - they will play in order... So say you want to add a song to an already existing list that was 3. you would change the 3 => 4 and add the line of music in the 'list' 'down below' (appearing in which order you want it to play in the 'loop')...
---------- Post added at 06:27 PM ---------- Previous post was at 06:26 PM ----------
Well Heaven and I were just messing with itQuote:
Originally Posted by crxfreak
so you may as well wait until next 'update' to see if it continues for you ;)
Overwrite it with a 0 length file, about as close as you'll get to deleting without repacking entire pck...Quote:
Originally Posted by 343
i know which file to edit but dunno how to
how do u play 3 songs one after the other? what code u have to use?
This should surely work, but there has to be a way to 'tell it' to actually delete a file -- I know it's possible back from when PWi changed their music and put them in PCKs (they wound up deleted in the music folder) =\ How this is done though *shoulder shrugg*Quote:
Originally Posted by das7002
the same exact way it looks in my post I linked:Quote:
Originally Posted by CULOBG
http://forum.ragezone.com/f452/need-...8/#post6524360
keep on saying to you that:
BGM(music) 3
doesnt work
sure it does -- it could be 0, 1, 3, 100, or 300 it will work =\
i want to play the 2 mp3 files
"huanjingyinxiao\disco.wav"
"Music\music\disco.mp3"
"Music\music\disco1.mp3"
ambiencestereo = 0
BGM(music) 3
like this doesnt work...
Nice nice nice, but the first 2 links are corrupted (or just not working) for me x.x
Here's another example: (excerpt from world precinct)
Code:"Arrowhead Peak"
5301 9 8 4 1 4 30 1 1 30
328.095001, 219.985001, -906.658997
629.495911 0.100000 -508.216553
548.084229 227.213715 -630.137939
540.868530 221.601669 -741.981018
584.162659 203.588730 -889.902588
606.280334 199.716583 -903.118286
860.025452 199.156281 -977.177124
1031.951782 0.100000 -899.726257
1027.873535 0.100000 -510.218323
629.441956 0.100000 -508.316162
"City of the Plume" -722.031982 219.100006 -1222.629028
"Heaven's Tear" 715.632996 472.467987 170.423004
"Arrowhead Manor" 313.000000 220.000000 -892.000000
"Rook's Valley" 426.782990 222.046997 -824.432983
"King's Feast" 649.000000 371.000000 -1232.000000
"Stairway to Heaven" 307.130005 344.804993 -199.612000
"Gate of Antiquity" -108.102997 219.716003 -322.764008
"Officer of the Stair" 302.433990 326.054993 -133.205994
"ambiencestereo\grassdaynormal.wav"
"Music\Common_F1.mp3"
"Music\Common_F2.mp3"
"Music\Common_F3.mp3"
"Music\Common_F4.mp3"
"ambiencestereo\winterwindtrees.wav"
ahh finnally understood lol tnx 343 a lot
is there also a way to make it random?
