But Do you have any suggestion what can make this error? :/Quote:
Originally Posted by 343
Any way, What kind of package is that? Still 1.3.6 or it's more? :)
Printable View
But Do you have any suggestion what can make this error? :/Quote:
Originally Posted by 343
Any way, What kind of package is that? Still 1.3.6 or it's more? :)
The only real suggestion I can offer is to re-install, as many times as it takes even. Because especially with the problem you described it sounds like something went awry during the copy and or install.
It is an update to this package. That is all I can say at this moment. About the only other thing I /can/ say is: This package has always focused on being an easy installation and operation. The update makes things even easier than they already are! I can say there weren't really even any "in game" changes made as this "MAJOR" update revolves mainly around how the package is installed as used. Again, to follow with the main intent this package has always had, to be easy to install and operate. :wink:
So far it's looking as if it may be out within a few months, though with something as major as this one (and my recent lack of free time) I don't want to give any specific times or dates...
@343 i am using a separate system as a server, ( linux 12.04-- 32 bit, with 160 HDD, an 1 GB of ram), i have copied this files to server, but when i borrows to server through my laptop it says server OFFLINE, i did start the file called start.sh in root folder, could you explain why is it so..
You have to go to... YourIP:8443/pwAdmin and then go to server control and then start the server from there after you start.sh
Hi 343, sorry if I don't speak English well.
I can't open myIP/admin when I start the server (I try IP:8443/admin and IP:8443/pwAdmin too, but I think is the same).
Images:
http://i44.tinypic.com/sercd3.png
http://i39.tinypic.com/2my8fbb.png
http://i40.tinypic.com/313hjmc.png
http://i41.tinypic.com/2vd1b1x.png
http://i43.tinypic.com/2zqfpug.png
http://i40.tinypic.com/2sb76t3.png
http://i40.tinypic.com/2dbtpjo.png
I don't know what's wrong. I would be very grateful if you help me. Thanks :)
PD: I have seen some people modify /etc/network/interfaces but I never modify that file, maybe that's the problem, I really don't know.
You shoud try to modify your /etc/hosts file to the Vmware adapter ip v4 address. Because now you are link to your own computer not your Virtual pc.Quote:
Originally Posted by Kmkazz
It's in your case 192.168.17.1, and you should do this too on the .../htdocs/config.php and the .../userconfig.jsp.
Maybe that will help.
Personally suggest: Use a Bridged host card on you virtual pc. My virtual pc never works when I try the NAT card.
Thank you 343 I found what was the problem, the installer works perfect. Now I only need the cpw Patcher set up and everything will be fine :3Quote:
Originally Posted by 343
I have the same problem as the last guy (kmkazz) here is what mine looks like, ALL files that i seen that needed to be edited, i just didnt Screenshot them all
First: http://i.imgur.com/K2BBojc.png
Second: http://i.imgur.com/IxP0dFm.png
Third: http://i.imgur.com/sI9RY11.png
i have checked around on this but i didn't understand much, can anyone help me on this?
You need to either put your VM on the same network or change all subnets involved to 255.255.0.0 so that they ARE on the same network. You are also going to want to tick the "replicate physical network connection state" in your VMware network adapter properties for the VM :wink:
Hey 343 :)
im having problems with the iso is there a way to connect with winscp? and copy the files manually? i tried the ip in ifconfig but cant connect even checked in my router to see an ip and the machine not showing.
***** update
I fixed this issue .... looking at wrong router :sneaky2:
if anyone else having problem with the server files try connecting with winscp but first install this
sudo apt-get install openssh-server
not sure this is the right thing to do but hey i am trying lol
Thanks so much for the reply.Quote:
Originally Posted by takkigergo
You suggest don't use NAT card. But if I use Bridged, what is the IP I should use?
http://oi43.tinypic.com/mb370l.jpg
192.168.17.1 is the IP of VM Network #8 type NAT (I try use this adapter with the files hosts, userconfig and config modified and don't work for me too when I try go to the website from my computer)
192.168.86.1 of VM Network #1 type Host-only (I also tried this IP in the files with this adapter and don't work)
http://oi40.tinypic.com/1219w9h.jpg
as what is the ip of the VM Network #0 (Bridged)?
http://oi44.tinypic.com/9jepo6.jpg
But the subnets are the same 255.255.255.0, VMware subnets and my internet connection. Or my internet needed a different subnet?Quote:
Originally Posted by 343
http://oi41.tinypic.com/jq2tms.jpg
And also tried...
http://oi44.tinypic.com/346xcns.jpg
I changed my router to 255.255.0.0 subnet (Network -> LAN) but I can't change this in VMware.
http://oi40.tinypic.com/1zl3z8z.jpg
If anyone want help me with TeamViewer: www.facebook.com/JonaIsHere
hmm my server are from 343 and i have one problem...some time my gamedbd are offline.
pm me your skype id ill have a look for youQuote:
Originally Posted by Kmkazz
I'm having trouble at mounting the server ISO. When I type mount /dev/cdrom /cdrom it gives me /dev/sr0: unknown device. Does anyone know how I could fix this please?
You can follow the directions HERE to figure out what device name your cd/dvd ROM drive is (if it's not sr0)
it seems it is sr0Quote:
Originally Posted by 343
http://img208.imageshack.us/img208/7238/ax8q.jpg
Copy the files from the ISO on your server......its easyQuote:
Originally Posted by Foxb0ss
check the connected in your cd rom settingQuote:
Originally Posted by Foxb0ss
I've an annoying problem.
I installed the server, no flaws. Ran it, no flaws. pwAdmin works fine.
But I cannot connect to MySQL via Navicat (I changed pwAdmin's password from "root" to my own via phpmyadmin (encrypted it using THIS MySQL5 encryptor).
Weird thing is that I installed the server a while ago on VMWare and did the same as above, but I could've connected. Now I can't anymore.
Therefore CPW doesn't work either. I get "host "xxx.xxx.xxx" is not allowed to connect to this mysql...". In phpmyadmin, pwAdmin has "%", so I should be able to connect from any host, but still doesn't work. Any ideas?
Quote:
Originally Posted by lolumadsir
me too thats why i dont use it
tyr this
http://YOURIP/phpMyAdmin-3.2.4/index...9115b049cf190d
http://oi39.tinypic.com/xpdawn.jpg
I think the image says enough.
Searched with the forum's search engine and nothing unusual.
Searched with google, the closest find of mine regarding Territorial Wars was http://forum.r..canceled-803174/
Anyone has any idea? Using 343's package. (The latest available release)
Best 1.3.* server. Works perfect.
Thanks for your hard work and your detailed and easy to follow guide.
Waiting for a 1.4.* Complete Package ;)
Keep up the good work!
1.4.x ? 343 ? never xD
343 hates 1.4.x There will never be a 1.4.x by him.Quote:
Originally Posted by fgru
How I can add Gold via Navicat?
You can also use pwAdminQuote:
Originally Posted by Victor GP