links broken
Printable View
links broken
Hewo!
I have a question about genesis interface
I downloaded it and changed the .pck files but it changed more things than only interface, i have new map and such
So i was wondering
Can u tell me WHICH EXACT FILES i need to add to change the interface to genesis one, i dont want to replace maps or any other thing except the interface >.>"
Answer would be rly appreciated
Thx in advance
Sorry, yes they are at the moment. I have fixed several more issues that were brought to my attention, and will be re-uploading the entire package again soon ;)Quote:
Originally Posted by DeathRobert
The genesis_interface I supply is meant for my client, if you're using it with my client you should have *no* issues whatsoever. If you're using it with a different client -- well then I can't really tell you what's going on because I wouldn't be familiar with that client now would I ;)Quote:
Originally Posted by Misonia
OK so the server installed perfectly the first time, but then something went wrong (I think it was with my router) and loads of IPs got re-assigned and my server's IP changed. Now other people can't get onto the server when they could before.
I decided something had gone wrong in somewhere I didn't know, so went to re-install the server. Followed the video to the letter (as much as I could because my Ubuntu installation was slightly different) and when I came to configure the IPs, ifconfig turned up an IP that is DRASTICALLY different to what is has been on other installations (now 10.0.xx.xx instead of 192.168.xx.xx) and I can't connect to the website or PWAdmin with this IP.
:grr: What the heck went wrong?
10.* is one of the reserved blocks for IP's for local addresses, usually used in very large LAN's (such as a school or corporation). Virtualbox NAT network adapter assigns in that range as wellQuote:
Originally Posted by McVinster
192.168.* is usually used for smaller networks due to its significantly smaller address space, you can use 10.* on a home network but usually it isn't.
You more then likely either switched to NAT inside virtualbox (if that is what you are using) OR your router is now assigning in the 10.* range
Got it, thanks, it had switched to NAT while I wasn't paying attention.Quote:
Originally Posted by das7002
Still no idea what went wrong the first time, but if this new installation goes ok, I'll just put it down to one of those bugs in the system that decide to pop up and surprise you every so often.
someone can put a guide to learn how can i use my player files in other repacks (save the player data to use it in other repack like this one).
that will help alot because i started my server with other package
Well you gotta make sure you add all the items that you had in other one or you might have items called wrong item. Theres two databases you need to copy though. One is found in phpmyadmin and the other is in the gamedbd folder.
ty men =P, my problem is because i started my server with other serverfiles after 343 release his repack and i dont want to loose my players data
Links are back up -- Newest package is now available =D
A few things fixed:
-Marriage
-a33/is33 (OHT)
-domain.sev
-TT/HH teleports
Hi 343Quote:
Originally Posted by 343
Now marriage work perfect?
yupp.Quote:
Originally Posted by Vito Corleone
...and don't forget the marriage daily quest works (once two ppl are married ofc) in my release too ;) :)
Could you be a bit mor specific abt this point or link to some informativ ressources?Quote:
Originally Posted by 343
How did you fix the mirage bug?
Posted via Mobile Device