¤ The Complete PW Package ¤

Quote:

---

Originally Posted by 343

Sadly I am not very well versed at a01 or a12... So if you wanted to see anything done you would need to be very specific... It's very well possible this next 'update' will (highly likely) be the last one ever... So if there's anything, anyone, would like to see included ~ now would be the time to speak up :wink:

---

Well since Nobody else will ask for it! I will, Upload YOUR edited Server files and client side 343! I want to see all of the hard work you've done! I know you know alot about this stuff and I think it would be amazingly awsome to see all of the work you've put into your own server! If you don't want to that's fine just thought I would ask :)

I don't have an actual ('live') server... I have made and deleted probably a million test/build VM servers over the time though... Right now my current test/build server is not much different than what's already out there (minus stuff for the 'update' though of course).

are your client sync with hrace009 server???

Quote:

---

Originally Posted by alhadi189

are your client sync with hrace009 server???

---

If you read the first post that would have been answered for you (and you would not have even needed to ask) by the way... :wink:

Quote:

---

Originally Posted by 343

Please note - that this release is intended as an entire package. That is, this server is NOT meant to be used with other clients, and this client is NOT intended for use with other servers etcetera... If you do attempt to use other clients with this server, or other servers with this client you WILL run into PROBLEMS!

---

hey..iam running os ubuntu..how i want to open perfect world?

Quote:

---

Originally Posted by waganer25

hey..iam running os ubuntu..how i want to open perfect world?

---

by reading and learning and searching

Quote:

---

Originally Posted by waganer25

hey..iam running os ubuntu..how i want to open perfect world?

---

used wine on ubuntu desktop . :lol:

Hi, 343 do u still got Kuqoi ModelView? do u know how to make it work? i was able to download it around but it says "Cant load elements.data" aparently its not in the patch that the program wanted it to be, i needed it to visualise GFX

Anything I have that is useful should be in my PW_DEV.ISO... I don't know for sure if I have the one that you've specifically asked for/about but I do know there is at least one model viewer in it :wink:

Quote:

---

Originally Posted by 343

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Once you have your server started -- you can navigate to its IP (from your 'client' PC) to view the 'PW website' where you can: register an account, change an existing accounts password, 'purchase' gold, Get an Item, Manage your guild icon, view player rankings, and view the knowledge-base -or- submit a ticket...

Additionally, if you navigate to your.servers.ip/admin that will bring you directly to pwAdmin ;)

Spoiler:

example:
http://192.168.1.51

and

http://192.168.1.51/admin (or http://192.168.1.51:8443/pwAdmin)

Other important

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Make sure to 'configure' your servers IP in the following files:

/opt/lampp/htdocs/config.php
/opt/apache-tomcat-5.5.28/2/webapps/pwAdmin/WEB-INF/.userconfig.jsp

(and of course serverlist.txt on the client side /element/userdata/server/)
(and of course within patcher, if you'll be using a patcher [on the client side])

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

YouTube - Installation Tutorial

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

---

Hi, I wanted to say thanks for the detailed guide.
BUT..

I've followed both your text guide and your video guide several times over.. but I still have a problem.

I can't get past the point where you login via your web browser.. :huh:

I typed in: ifconfig eth0 and found the IP, I've typed that IP in both the: nano /opt/lampp/htdocs/config.php, nano /opt/apache-tomcat-5.5.28/2/webapps/pwAdmin/WEB-INF/.userconfig.jsp and nano /etc/hosts and saved changes.

I typed the same IP into VBox's settings on both the server and VBox..
I typed the same IP into the internet browser, but it can't find the web server.

What have I done wrong? :?:
I'm in-experienced, as you can tell.:/:

Making server PW, and problem on ubuntu server code "cd /root/notes"

I download and following step by step from this thread
http://forum.ragezone.com/f694/compl...ackage-736572/

The first problem is not that but code "mount /dev/cdrom /cdrom" , 1 week that solved my problem with just add code "mkdir /cdrom" < is incorrect?

I've finished the first problem and get new again:*:

"cd /root/notes"

this is the screenshot



Oh,, i use the ubuntu server 12.10 32bit

there is somebody can help the problem?

I've moved this into the release thread as to keep the forum clean :wink:

Looks to me like you didn't (forgot to) mount the cdrom

Is still my friend,, what must i do T_T

another screenshot with mount code
Attachment 126004

and i have 2 questions,

i must use the ubuntu server 64 bit or 32 bit, and non-LTS or LTS

when installing ubuntu server until end , Internet should be active or not

thanks

edited:

oh I see. directory root/notes inside server_root.

But how make server_root read on ubuntu server running VMWare?

Attachment 126023

E:\GAME\136_343Client\PW_136_Client.7z.001 : 97741D520BEB46C25B911A2AAFB75E82

E:\GAME\136_343Client\PW_136_Client.7z.002 : 6E08BC83E32A3075E101A5C8EE675E66

E:\GAME\136_343Client\PW_136_Client.7z.003 : 04EE1E8A58319E8405C857693986E99A

i got err.. any solution ???

i already finished on this problem (by my self)
http://forum.ragezone.com/f694/compl.../index195.html

and the last problem is setting the IP to open pwAdmin site (10.0.0.51/Admin),

so basically:

where must i change the IP (very detail like setting in VMware, Network and Sharing Center, or inside server_root)

and ip what should I enter? whether from the site What Is My IP Address or on cmd " ipconfig "

Quote:

---

Originally Posted by strekerboy

i already finished on this problem (by my self)
http://forum.ragezone.com/f694/compl.../index195.html

and the last problem is setting the IP to open pwAdmin site (10.0.0.51/Admin),

so basically:

where must i change the IP (very detail like setting in VMware, Network and Sharing Center, or inside server_root)

and ip what should I enter? whether from the site What Is My IP Address or on cmd " ipconfig "

---

Those HASH'S don't look the same as what I have up, so my guess is bad DL's... DL again until checksums match (and or just wait for my update [if you're willing/able to wait a couple months LOL])...

Quote:

---

Originally Posted by strekerboy

i already finished on this problem (by my self)
http://forum.ragezone.com/f694/compl.../index195.html

and the last problem is setting the IP to open pwAdmin site (10.0.0.51/Admin),

so basically:

where must i change the IP (very detail like setting in VMware, Network and Sharing Center, or inside server_root)

and ip what should I enter? whether from the site What Is My IP Address or on cmd " ipconfig "

---

Use the LAN IP of the machine (not the one you'll get from any "what is my ip" website). Also not the one from IPCONFIG, as that is your Windows machine (and a windows command) -- that would also be like typing 127.0.0.1 in to your browser. You will want to use the IP from your VM (you can use ifconfig to get this)...

If you need any other basic networking assistance check out THIS thread :wink: http://forum.ragezone.com/f695/absol...6/#post6038760

HAHAHAHA:laugh:

Now its work my friend 343 . I search and read by read in forum , blog , other in google .

I waited so long reply from you:glare:

but I still thank you for the help and information.
and again my question is what should be selected in VMWARE network connection?

Bridge, NAT, Host-Only, or Custom? , In here im using NAT and work.

hey 343 i followed your guild to the T and it came out perfect but i have a small problem now lol i had to take back my 32 inch flat screen back to hhgreg but they had discontinue the model i had so i ended up getting a 39 inch now I'm not sure if its the new flat screen causing my problem but every time i start the client up it loads then closes , ia it possible the monitor causing the problem?

just incase upload my logs for client

Quote:

---

Originally Posted by strekerboy

HAHAHAHA:laugh:

Now its work my friend 343 . I search and read by read in forum , blog , other in google .

I waited so long reply from you:glare:

but I still thank you for the help and information.
and again my question is what should be selected in VMWARE network connection?

Bridge, NAT, Host-Only, or Custom? , In here im using NAT and work.

---

Bridged (with replicate a physical network connection state ticked/selected)

At least that's what I use, and recommend... I guess it could depend on what exactly you want from it. Myself I like being able to test things from any PC in my LAN, so host only would not be viable (that only allows a "network connection" between the VM host and guest OS's)... Now NAT from what I understand (never used it) actually shares a single IP for your host and guest (VM) OS... IE your windows (guessing windows [host]) would have IP 192.168.1.10, so your linux (guest) VM would also be 192.168.1.10 (like I said, I think)... So, and, I think bridged (w/ replicate physical) is the best, because then it's truly like being it's own machine. It will need a UNIQUE IP on the network, and it will truly be like a separate physical machine on the network... So EX: your host windows machine would be 192.168.1.10 while your VM/guest/linux could be 192.168.1.11 (or anything excetp 192.168.1.10 [and whatever the IP of any other devices on your network including your router])...

Quote:

---

Originally Posted by Q2Q

hey 343 i followed your guild to the T and it came out perfect but i have a small problem now lol i had to take back my 32 inch flat screen back to hhgreg but they had discontinue the model i had so i ended up getting a 39 inch now I'm not sure if its the new flat screen causing my problem but every time i start the client up it loads then closes , ia it possible the monitor causing the problem?

just incase upload my logs for client

---

Not too sure on this one, although I must say it doesn't sound right (I don't really think swapping displays would cause this)... I am actually about to go to bed (super tired) so I will check over your logs at my next soonest possible convenience :wink:

client some how got corrupted so just mounted iso and redid client

are there any other links to download the client ?
so slow when downloading from 4shared..
please,any full speed web hosting...
thx before...

Right now the only place it's available is 4shared sorry. Also the download that is currently available is heavily dated as I am currently working on a MAJOR update to this package (mentioned several times in this thread I think by now)... However I haven't really had any clue on when I may finish... More or less it's "in the air" at this point, it could be tomorrow, it could be next week, it could be next year - who knows... This next 'update' will probably be the last one EVER to this package as I will most likely be leaving PW 'dev' in its entirety after I finish and release it...

Quote:

---

Originally Posted by HeavenOnlyWishe

By the way 343, is there a way to use the CPW to remove unneeded files? Like say there are extra graphics inside of the models.pck that you want completely removed from the game, can this be done somehow? (Made a nooby mistake, got into a rush last night for an update and accidentally uploaded the interfaces.pck instead of each individual file, now my player's client is crashing, had to repack the files and give it to them manually to fix it, but now this might affect anyone who joins....)

And your welcome, I use the Genesis interface for my server, so I'll be continuing to update it. When I make a more updated version I post it here for you along with notes on what I did.

---

I know this is not an elgant solution, but you could alwasy use cpw to replace the graphics files with files 1 byte in size...

does anyone have a list of maps and corresponding file names?

Quote:

---

Originally Posted by shard1976

does anyone have a list of maps and corresponding file names?

---

You can get this on your own from the server or the client. You can look at precinct.clt from the client, or you can even look at serverctrl.jsp from pwAdmin. Also from surfaces.pck form the client, from all the maps in /surfaces/ingame/XXX.dds

Or the interwebz (maps) @ : Map - ecatomb.net : Perfect World (on this website the images have an added 2 before the extension IE a022.jpg == map a02 :wink:)

Also, if you're looking for what they're called for the command to use to start a certain map ~ that can exclusively be found in gs.conf (ie you want to know how to start secret passage, it would be "./gs is02" [not "./gs a02"] and you would look at the server side gs.conf to figure this out)

Spoiler:

Code:

---

;----------------------------------------------------------------------------
[World_is02]
index                        =        32
tag                        =        102
base_path                =        a02/

---

This is what you would use command line to start this map with GS. This is the directory it will look for the map files in ./PWServer/gamed/config/

Hey,
The website keeps redirecting me to /register/ i've looked in every single config file and found 0.

Where can I change this?

----------------------------------

Other thing is:

- How can I make the start.sh (in root) start at startup (not when I log on but when the computer starts?) I have tried but the it just gives some error in Tomcat,, I think is something with the java, but it goes so fast that I dont have time to read the rest!

Thank you,
Daalpadu

PS: Great release, 343.

It's supposed to do that...

Although if you're attempting to make customizations ~ you can change this on your own via the simple HTML redirect that I have in there (this release uses a lamp stack (xampp) installed to opt)...

Quote:

---

Originally Posted by 343

It's supposed to do that...

Although if you're attempting to make customizations ~ you can change this on your own via the simple HTML redirect that I have in there (this release uses a lamp stack (xampp) installed to opt)...

---

Oh, I forgot to check for HTML Redirects! :sleep:

Thank you!

Quote:

---

Those who continue to bring up this false positive in this thread WILL receive an infraction...

---

well Im very Positive about this thread :P

Code:

---

Using username "root".
root@192.168.1.15's password:
Linux PerfectWorld 2.6.32-33-generic-pae #70-Ubuntu SMP Thu Jul 7 22:51:12 UTC 2011 i686 GNU/Linux
Ubuntu 10.04.3 LTS

Welcome to Ubuntu!
 * Documentation:  https://help.ubuntu.com/

Your CPU appears to be lacking expected security protections.
Please check your BIOS settings, or for more information, run:
  /usr/bin/check-bios-nx --verbose

  System information as of Wed Apr  3 22:19:36 UTC 2013

  System load:  0.12              Processes:          106
  Usage of /:  1.7% of 140.49GB  Users logged in:    0
  Memory usage: 0%                IP address for eth0: 192.168.1.15
  Swap usage:  0%

  Graph this data and manage this system at https://landscape.canonical.com/

100 packages can be updated.
72 updates are security updates.

New release 'precise' available.
Run 'do-release-upgrade' to upgrade to it.



==================================================
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

            Welcome to 343's PW SERVER
                                              *343
__________________________________________________
==================================================


Last login: Wed Apr  3 22:01:57 2013 from 192.168.1.4
cannot (un)set powersave mode
root@PerfectWorld:~# ./start.sh

=== STARTING MySQL, APACHE, & APACHE TOMCAT NOW ===

=== STARTING MySQL ===
XAMPP: Starting MySQL...
=== DONE! ===


=== STARTING APACHE ===
XAMPP: Starting Apache with SSL (and PHP5)...
=== DONE! ===


=== STARTING APACHE TOMCAT ===
Using CATALINA_BASE:  /opt/apache-tomcat-5.5.28
Using CATALINA_HOME:  /opt/apache-tomcat-5.5.28
Using CATALINA_TMPDIR: /opt/apache-tomcat-5.5.28/temp
Using JRE_HOME:        /usr/java/jdk1.6.0_12
Using CLASSPATH:      /opt/apache-tomcat-5.5.28/bin/bootstrap.jar
=== DONE! ===


=== STARTING APACHE TOMCAT ===
Using CATALINA_BASE:  /opt/apache-tomcat-5.5.28/2
Using CATALINA_HOME:  /opt/apache-tomcat-5.5.28/2
Using CATALINA_TMPDIR: /opt/apache-tomcat-5.5.28/2/temp
Using JRE_HOME:        /usr/java/jdk1.6.0_12
Using CLASSPATH:      /opt/apache-tomcat-5.5.28/2/bin/bootstrap.jar
=== DONE! ===

=== ALL DONE! ===

---

this is second time i installed it first time was to test my learning knowledge but then i decided to redo it again re-installed ubuntu and followed your guided once again however second time around everything went correctly edited all the needed files that you posted however

im getting this never happen before

Code:

---

Oops! Google Chrome could not connect to 192.168.1.15:8443
Suggestions:
Try reloading: 192.­168.­1.­15:­8443/­pwAdmin
Search on Google:

---

Code:

---

Oops! Google Chrome could not connect to 192.168.1.15:8080
Suggestions:
Try reloading: 192.­168.­1.­15:­8080/­pwAdmin
Search on Google:

---

so kind of curious what might gotten screwed up

never mind after retracing steps found error with java fixed now

hey, any mirror to mediafire???
my speed are low, and 4shared not support resumable download...
it take more than 24 hour :(:
to download client :(:

-------edited---------
i got error when start the server,
gacd still offline, but in server status is online,
is that ok without gacd???
here's the screenshoot :
Attachment 127011
Attachment 127012

Every Linux emu I try to put on my computer gives me a warning regarding NOT having a windows logo. I have win XP, I would like to know what program to grab or if I should disregard warning. BTW I ran my search for them on the basis of it running on XP. Also I chkd the forums, but maybe I passed over it by accident if so, yell, scream, and point at me, just point out the post,pls.

Quote:

---

Originally Posted by roadtrip0088

Every Linux emu I try to put on my computer gives me a warning regarding NOT having a windows logo. I have win XP, I would like to know what program to grab or if I should disregard warning. BTW I ran my search for them on the basis of it running on XP. Also I chkd the forums, but maybe I passed over it by accident if so, yell, scream, and point at me, just point out the post,pls.

---

Download THIS: VMware Player:

Hey Can you help me how many RAM need to run this server?

http://forum.ragezone.com/f755/requi...1/#post6885483

I didn't sticky that thread fer nuffin <.<

Quote:

---

Originally Posted by likertuban

i got error when start the server,
gacd still offline, but in server status is online,
is that ok without gacd???
here's the screenshoot :
Attachment 127011
Attachment 127012

---

help sir :(:

There are many things that come to mind: Something could be wrong/bad with you machine. Perhaps bad RAM, or a bad HDD, maybe even a bad CPU... That would probably be the worst case scenario (having some bad hardware)... Maybe you just got a bad DL, of either the package and or the OS; have you checked all of the file hash's to make sure you have all good downloads? A bad download should be relatively easy to remedy (as long as you don't have bandwidth constraints or something)... Or at the simpler end of things, maybe you just a bad install of the OS or this package. If your hardware tests ok, and all your file download hash's match their proper 'checksums' then most likely a simple re-installation should cure it...

notes: Segmentation fault - Wikipedia, the free encyclopedia

for those who have a finicky dvdrom drive like i have upload your iso to server place it in /tmp/

chmod on iso so you can access

Code:

---

chmod rwxr--r--

---

then

Code:

---

mkdir /mnt/iso

---

after making the dir
do this :

Code:

---

mount -o loop /tmp/server_root.iso /mnt/iso

---

then go to dir it's mounted in

Code:

---

cd /mnt/iso

---

to verify iso

Code:

---

ls -l

---

then finally just do

Code:

---

cp -R * /

---

this is for those who had a problem with ubuntu detecting disk image on cd-rom

Quote:

---

Originally Posted by 343

There are many things that come to mind: Something could be wrong/bad with you machine. Perhaps bad RAM, or a bad HDD, maybe even a bad CPU... That would probably be the worst case scenario (having some bad hardware)... Maybe you just got a bad DL, of either the package and or the OS; have you checked all of the file hash's to make sure you have all good downloads? A bad download should be relatively easy to remedy (as long as you don't have bandwidth constraints or something)... Or at the simpler end of things, maybe you just a bad install of the OS or this package. If your hardware tests ok, and all your file download hash's match their proper 'checksums' then most likely a simple re-installation should cure it...

notes: Segmentation fault - Wikipedia, the free encyclopedia

---

i've check it sir,
MD5 hash sum is match...
so my download is not corrupt...
i'm sure my computer hardware are fine,
btw i use ubuntu 12.10 server
i've search it, and someone have the same problem with me, with ubuntu 12.10 in this forum,
but he didn't tell how to fix it, and not replay my message...
:(:

likertuban, if you can find it, try using 10.04 instead and use the server edition(as you should be using for all ubuntu versions).

my internet too slow...
i'm currently downloading the client, and not done yet after 2 days...
that's why i hope someone have a fix,
and another version is the last methode if it not work :(

sir,
i'm succesfully play the game,
but still,
gacd is offline,
i just want to know, what gacd used for??
and is it ok to play wothout gacd online???
since it's anti cheat right? (i'm playing alone, not live server)
hope someone mind to answer my question :D:

Ideally you'd want to grab ubuntu 10.04 LTS (included in the first post) since that is what this release was meant for. There is also a high probability it would also work just fine with ubuntu 12.04 LTS as well (since that's what I'm designing the major update for this package to work on), you do NOT want to use 12.10 or any other NON LTS version...

Quote:

---

Originally Posted by 343

Ideally you'd want to grab ubuntu 10.04 LTS (included in the first post) since that is what this release was meant for. There is also a high probability it would also work just fine with ubuntu 12.04 LTS as well (since that's what I'm designing the major update for this package to work on), you do NOT want to use 12.10 or any other NON LTS version...

---

ummmm,
sir, i downloaded ubuntu 10.04.3, but not from first post,
i downloaded it in this site :
Ubuntu 10.04.3 LTS (Lucid Lynx)
http://old-releases.ubuntu.com/relea...erver-i386.iso
is that the same?
if so, i'll try again from the beginning...
:):

Ideally you'll want the 64-bit version:
http://old-releases.ubuntu.com/relea...rver-amd64.iso

Quote:

---

Originally Posted by 343

Ideally you'll want the 64-bit version:
http://old-releases.ubuntu.com/relea...rver-amd64.iso

---

ok, thanks sir, i'm trying...
btw, what is gacd used for??
is that only for anti cheat???
since i'm able to play it without error yesterday, with gacd offline...

I believe so yes...

Well how is this completed?

I mean all other release like hrace are same just diffrent Ips nothing else right?

but hrace realese have many guides on making it online does this have?

Well if it does please tell me cause I already used it

You don't need a guide to "making it online" making ANY server online is the SAME... It does not matter whether it is a PW server, or an apache server, or a WoW server, or a MySQL server, or a Ventrillo server, or a Teamspeak server, or a CounterStrike server, or a Mumble server, or an FTP server, or a DNS server, or a ... ... ... do you get the point???

Though, if you're having problems with networking ("making it online" as you say) you may want to read (note: you'll have to not only read but understand it too, so re-read it over and over if you have to, until you fully understand it) THIS: http://forum.ragezone.com/f695/absol...6/#post6038760

Well I downloaded all the files but I dont understand[where is the guide?] lol

Everybody with half a brain does not need a guide for this fantastic release. I wish it would have been around when I started, props to 343.

I really really wish that u would once try to answer me in a good way.every time u answer me u make me feel like if iam a noob well try to tell me that in a good way LOL.

Well my question is what file do I open in the vbox?

if you dont want to answer then just dont but dont keep insluting others.

thankyou

Alright I finished downloading but which file do I put in my vbox ?

hey guys I just downloaded the 343 package I want to ask how to use it?

and which file to import to the vbox?

and what is the ubuntu-10.04.3-server-amd64 used for
and what is the ubuntu-10.04.3-server-i386 used for?


thanks in advance

can I get help please? I think you guys all use that package and I think you all know how to use it so.. please help me :)

Come-on guys lol I really want to use that it like 10 ppl told me its better and now no one responds? seriously? I just want to know how to use it or install it

Quote:

---

Originally Posted by taildfox16

Come-on guys lol I really want to use that it like 10 ppl told me its better and now no one responds? seriously? I just want to know how to use it or install it

---

The second post is guide about installation.

nice work bro, I think until I see it also plays

I suggest you use 64-bit (amd64) OS

The upcoming major update to this package wont support x86 any longer BTW, so just another reason to go x64 (amd64)

taildfox16 any 'instructions' you may need are post #2 of this thread...

You're going to want to install the OS (linux) I recommend using the x64 (amd64) version listed in post #1. Once you have the OS installed you can install this PW server package using those instructions from post #2... Takes about 12 minutes to do :wink:

That's one of the nice things about my release. You can install it in any which way you want. On a physical (real) machine, or in a VM etc... All you have to do is install the OS, then this package. Doing both should take you about 12 minutes (as depicted in the video of me doing it in post #2 of this thread)... It's really that easy!!!

well how do I install it I have the file [ubuntu-10.04.3-server-amd64.rar] right?

Well where is the installation application

-------------------------------------------------------------------------------------------

So mind tell me where and how to install it?

I did watch ur installation tutorial but u didnt mention where is the file to start that instllation?

Its Vbox [Iguess] will which file did you import in the vbox?

thank u
--------------------------
Iam waiting all day for getting help lol.. please help me

thank u..

Quote:

---

Originally Posted by taildfox16

well how do I install it I have the file [ubuntu-10.04.3-server-amd64.rar] right?

Well where is the installation application

-------------------------------------------------------------------------------------------

So mind tell me where and how to install it?

I did watch ur installation tutorial but u didnt mention where is the file to start that instllation?

Its Vbox [Iguess] will which file did you import in the vbox?

thank u
--------------------------
Iam waiting all day for getting help lol.. please help me

thank u..

---

And now we are back to the epic and the great : LET ME ******* GOOGLE THAT FOR YOU
:?: you wont fiind everything on ragezone , try googling stuff

Yeah no clue why talid can't google, I stopped answering to him because I would be offensive :O:

Quote:

---

Originally Posted by taildfox16

I really really wish that u would once try to answer me in a good way.every time u answer me u make me feel like if iam a noob well try to tell me that in a good way LOL.

Well my question is what file do I open in the vbox?

if you dont want to answer then just dont but dont keep insluting others.

thankyou

---

i think you are totally a noob

Quote:

---

Originally Posted by taildfox16

Alright I finished downloading but which file do I put in my vbox ?

---

Quote:

---

Originally Posted by taildfox16

hey guys I just downloaded the 343 package I want to ask how to use it?

and which file to import to the vbox?

and what is the ubuntu-10.04.3-server-amd64 used for
and what is the ubuntu-10.04.3-server-i386 used for?


thanks in advance

---

Quote:

---

Originally Posted by taildfox16

can I get help please? I think you guys all use that package and I think you all know how to use it so.. please help me :)

---

Quote:

---

Originally Posted by taildfox16

Come-on guys lol I really want to use that it like 10 ppl told me its better and now no one responds? seriously? I just want to know how to use it or install it

---

fine, i'll try to give you a guide,
it's different with hrache which you can just simply "import appliance"
in this files,
you must install ubuntu in vbox, klik new, and follow the guide
that is what this files used for :

Quote:

---

Originally Posted by taildfox16

and what is the ubuntu-10.04.3-server-amd64 used for
and what is the ubuntu-10.04.3-server-i386 used for?

---

how to install linux?
watch video in post #2
after you install linux/ubuntu
you need to install winscp (google it)
second, run your linux
type : sudo passwd
then enter
then type a password (password you type won't appear)
retype your password
type ifconfig
there's your IP
open winscp
click new,
type your ip from ifconfig to hostname in winscp
username=root
password=password you type in sudo passwd
save and login
import files server_root.iso contain into root : /*.*
here they are,
just watch the video in post #2
and you'll know what to do next...
sorry for bad english :P:

well what is iwant is related to here I guess.

the vedio doesnt show what to do after I click 'NEW'

Attachment 127896

what to click there?

Quote:

---

Originally Posted by taildfox16

well what is iwant is related to here I guess.

the vedio doesnt show what to do after I click 'NEW'

---

wew,
total noob,
if you want to follow my guide :
use virtual cd drive (i'm using ultra Iso, you can use daemon tools too)
after that,
mount the ubuntu-10.04.3-server-amd64.iso or ubuntu-10.04.3-server-i386.iso
depend on which one you want to install it...
open vbox
click new, next, give a name, choose operating system linux, version ubuntu choose memory RAM you want to used for that ubuntu (at least 1GB or 1024MB, create new hard disc, click next, next, dynamically expanding storage, click next, change size to 30GB
finish, finish
click on start
next, click on cd/dvd room device,
on media source, change to your mounted iso virtual drive, next, next, finish (next follow video on post #2)

i used sun virtual box v 3.1.2
not oracle

Ohh ok thanks bro and dont call me noob [ I wont answer u back because u helped me]

In my opinion you should just quit. You won't get anywhere.

well, that is ur opinion, Who cares? lol

I only care about my opinion.

You will see ;)

sure lol You know its great when a 13 years old kid start making his own game right?

what do you mean I wont be able to get to any thing? you mean the items and npc? well If its same like hrace realese then It will be easy to edit things.. lol

you know just because Iam small I take time to do things

But atleast I do it after asking and trying,[I ask more] XDD
-----------------------------------------------------------------------------------------
name server should be same as my gateway?

Quote:

---

Originally Posted by taildfox16

sure lol You know its great when a 13 years old kid start making his own game right?

what do you mean I wont be able to get to any thing? you mean the items and npc? well If its same like hrace realese then It will be easy to edit things.. lol

you know just because Iam small I take time to do things

But atleast I do it after asking and trying,[I ask more] XDD
-----------------------------------------------------------------------------------------
name server should be same as my gateway?

---

LOL LOL LOL LOL LOL LOL LOL LOL LOL LOL LOL LOL LOL LOL LOL LOL
Try searching then asking more , cause you already bored of soo many questions

Okay guys Iam finally done with the server and here is my problem..

Attachment 127905Attachment 127906

thanks in advance.

13 Years old? That kind of explains it...

Well I still needhelp with my winscp
--------------------------
btw what is the mac adress of this release?

Stop bothering with winSCP, mount this package ISO as an optical disc and install it that way. MAC addresses aren't software related they're hardware related...

Quote:

---

Originally Posted by taildfox16

Ohh ok thanks bro and dont call me noob [ I wont answer u back because u helped me]

---

LOL,
you don't want to be called as noob?
but you sure ask too much than trying?
hey, i'm also new in here,
but at least i knew how to install ubuntu on vbox without anyone teach me, and without asking :P:
and yeah, i'm once asked when i'm stuck,
and swoosh91 once get angry because of my stupid, but at least, i admit it if i'm a noob,
:P:
and learn from that :):

Told you, I didn't get angry. Why would you care even if though, this is the internet...

Quote:

---

Originally Posted by taildfox16

Well I still needhelp with my winscp
--------------------------
btw what is the mac adress of this release?

---

From what I can see the address you entered is the gateway address when you should have used 192.168.100.10, it also looks like you have Hamachi running, I have had problems in the past with that running while trying to get the server up on the network side of things.... just a heads up.

Yea, I didn't wanna really say anything, since I already have, in this very thread at that <.<

http://forum.ragezone.com/f694/compl...ml#post7266282

Quote:

---

Originally Posted by 343

First of all GET RID of Hamachi, it is GARBAGE!

I REALLY wish I could claim this kid was mine (he sounds like he's 10 but) he knows more about networking than 90% of the adults I know <.<

http://www.youtube.com/watch?v=fQ7s4HY-fSE]

http://www.youtube.com/watch?annotation_id=annotation_431145&feature=iv&list=UUYiEeDs-ZkojiMjOwRCQ_KA&src_vid=fQ7s4HY-fSE&v=5O5H8ds5_kA]

I wont give him any credit for using an apple product (in the 2nd video) since I HATE apple, but I will give him credit since I noticed he was using a DLink "office" router (which will be better than standard 'consumer crap'), even though I realize it's most likely his parents that bought it, and it's probably also his parent(s) that can be credited for him knowing so much... Trust me, my kids will know just as much if not more than this little guy >.>

@corri800:
I'm really not trying to insult you, I AM trying to help; but I am not going to spoon feed you because then you wont learn anything. If you GIVE a man a fish you feed him FOR A DAY, but if you teach him to fish, you feed that man FOR LIFE...

First thing is first, get rid of Hamachi... It will not help you learn networking one bit... Also, you really do NOT have to learn advanced networking to run a server of ANY type. It's the most basic of networking... Some points you should learn/read up on:

• DHCP (static and dynamic IPs) because for servers you HAVE to use STATIC
• Firewall / Port Forwarding because for servers you HAVE to allow inbound traffic on the designated port(s) for whatever services you're running
• DNS (if you want people to be able to access your server using a simple name like MYSERVER.COM)
• ROUTERS ~ They are the middle man between your LAN and the WAN
• The difference in LAN and WAN IP's

---

right I had it my bro used it for his runescape server?

lol damn I thought the problem was in the installation so I deleted it and going to restart it now..

I should delete it from the cp right?
--------------------------

btw my homegate ip is 192.168.100.1 xD..-

------------------------
btw when iam installing the server is there anyway to get the ips automatically?

cause Iam not sure about all my ips

No, you do not want to use DHCP for servers, ever...

Do I need to choose virtual hard disk or virtual machine disk? thnks

btw 343 are u rage from oldschool pw?

-------------------------

I mount the server root now how to put it in the root directory?...

If its in winscp I have problem and it doesnt work

------------

is there anything wrong with my interfaces? Attachment 127976

Quote:

---

Originally Posted by taildfox16

Do I need to choose virtual hard disk or virtual machine disk? thnks

btw 343 are u rage from oldschool pw?

-------------------------

I mount the server root now how to put it in the root directory?...

If its in winscp I have problem and it doesnt work

---

IDK, I don't use VBOX - I would suggest consulting VBOX instructions/manuals/websites/forums...

No...

Just follow the directions in post #2 :wink:

I do not use WinSCP myself, so again (like with VBOX) I would suggest consulting WinSCP instructions/manuals/websites/forums...

if you dont use vbox you should be using VMWare right?
f you dont use Winscp how do u put the root.iso in the data base?

So. I set up the server on some virtualization software (I use VBox but I believe VMware player is easier to use, just the free version is super annoying), and it worked fine. Played around with the server and the settings, fantastic. Can configure it through lan, no problems there.

Then I set it up on a dedicated server. access to your (343's) account management pages is fine. I can initialize the server through putty, ok. But I can not access pwAdmin.

I have opened port 8443 in UFW but it hasn't helpped.

I dont mind not being able to use phpmyadmin, I can access the database through putty, but I need pwadmin access :/

If you could give me some pointers? (Chrome wont even tell me the error. It merely says it could not connect to IP:8443/pwAdmin)

Many thanks

Falney

Edit:

On a side note. It seem's to be a great server from what I have seen and it has been a fantastic introduction to setting up PWservers. Thank's :>

can u show me ur interfaces?

Quote:

---

Originally Posted by taildfox16

if you dont use vbox you should be using VMWare right?
f you dont use Winscp how do u put the root.iso in the data base?

---

One way of doing it is to download Daemon tools or some other program that allows you to mount .iso files, mount it then in linux type

"mount /dev/cdrom/ /cdrom" I think it is. It says on the second post.

As for my interfaces? It wont do you any good. The chance we have the same IP/hardware is unlikely.

yes I know I dont want to copy ur ips, but I want to see somthing in the netmask ..
-----------------------------------------

falney as it works for u can u help me please?

add me in skype for easier speech please.

skypename: john.jakson7

I would really appreciate it if u add me and help me. [I REALLY LIKE TO TEST THIS RELEASE Bro SO PLEASE HELP ME.........

thanks in advance.

Quote:

---

Originally Posted by falney

One way of doing it is to download Daemon tools or some other program that allows you to mount .iso files, mount it then in linux type

"mount /dev/cdrom/ /cdrom" I think it is. It says on the second post.

As for my interfaces? It wont do you any good. The chance we have the same IP/hardware is unlikely.

---

This sounds like the long way around. You shouldn't have to mount the ISO within your host OS to be able to mount it within your guest OS. You should be able to directly mount it to the guest OS using the VM software. At least I know this is the case with VMware, again can't say anything about VBOX as I do not use it (and never have, only tried it once to see that I thought it sucked compared to VMware!).

Although, that should still work (I highly doubt there is any necessity to do it the long way like that).

Quote:

---

Originally Posted by taildfox16

if you dont use vbox you should be using VMWare right?
f you dont use Winscp how do u put the root.iso in the data base?

---

(as above) Directly mount it to the guest OS as an optical disc (and you're "putting it in" the VM, not any "data base")

Quote:

---

Originally Posted by falney

So. I set up the server on some virtualization software (I use VBox but I believe VMware player is easier to use, just the free version is super annoying), and it worked fine. Played around with the server and the settings, fantastic. Can configure it through lan, no problems there.

Then I set it up on a dedicated server. access to your (343's) account management pages is fine. I can initialize the server through putty, ok. But I can not access pwAdmin.

I have opened port 8443 in UFW but it hasn't helpped.

I dont mind not being able to use phpmyadmin, I can access the database through putty, but I need pwadmin access :/

If you could give me some pointers? (Chrome wont even tell me the error. It merely says it could not connect to IP:8443/pwAdmin)

Many thanks

Falney

Edit:

On a side note. It seem's to be a great server from what I have seen and it has been a fantastic introduction to setting up PWservers. Thank's :>

---

Not sure about the whole port 8443 thing for you :(: The update that will be coming out sooner or later has done entirely away with the 2nd installation of tomcat...

As redundant as it will be (troubleshooting usually is) double check EVERYTHING. Make sure it's running, make sure all the ports are open in any and all firewalls, if this dedicated server is located outside the LAN, also make sure 8443 is an allowed OUTBOUND port, etc etc etc... (Also ofc make sure you've installed ia32-libs if using x64) Pulling it apart and being redundant is the only way you or anyone else will find the problem :wink: :):

Quote:

---

Originally Posted by taildfox16

yes I know I dont want to copy ur ips, but I want to see somthing in the netmask ..
-----------------------------------------

falney as it works for u can u help me please?

add me in skype for easier speech please.

skypename: john.jakson7

I would really appreciate it if u add me and help me. [I REALLY LIKE TO TEST THIS RELEASE Bro SO PLEASE HELP ME.........

thanks in advance.

---

if you're sitting at a home computer, on a home network, your netmask is most likely 255.255.255.0 (MAYBE 255.255.0.0 depending on the router, but I doubt it)...

(as above) Directly mount it to the guest OS as an optical disc (and you're "putting it in" the VM, not any "data base")
by 343

Well how should I do that? when I write the
mount /dev/cdrom/ /cdrom

it says block device /dev/sr0 is write-protected , mounting read-only


so what to do there?

---------------------

what VMware do u use in the vedio?

I mean workstation or VMWare server or what?

Quote:

---

Originally Posted by 343

This sounds like the long way around. You shouldn't have to mount the ISO within your host OS to be able to mount it within your guest OS. You should be able to directly mount it to the guest OS using the VM software. At least I know this is the case with VMware, again can't say anything about VBOX as I do not use it (and never have, only tried it once to see that I thought it sucked compared to VMware!).

Although, that should still work (I highly doubt there is any necessity to do it the long way like that).

---

I have never managed to mount an ISO natively while using vbox without first manually setting up a drive in ubuntu on any version of ubuntu. I mentioned the method because he was talking about using vbox and that was the easy way of doing it. I couldn't get vBox to register server_root.iso as a ligit iso. It kept throwing a tantrum so I added a virtual drive to ubuntu and uploaded the iso to the server when I was doing initial tests on a cheap vps.
Using daemon tools is a much easier way of getting around vbox's pissyness over the iso.

Before you say to change to VMWare. I use vBox because I like the VBoxManage CMD program and I think VMWare took the network manager out of the free player they have.

Quote:

---

Originally Posted by taildfox16

it says block device /dev/sr0 is write-protected , mounting read-only

---

given that it is a CDROM, this is pretty natural. I believe it did this on the tutorial video.

As for my problem.

Many hours and much headache later... It is fixed and working. I am considering pulling it apart and setting it up manually for the production server though. Despite the problems I have had though, I really love this release. Thanks again.


EDIT:: For Taildfox

When it says that is is "mounting read-only" type in

cd /cdrom/

then?

I typed that and now root@perfectworld:/cdrom#

then I type cp -R * /

what next?

-----------
add me on skype please...

john.jakson7

question, is there any specific reason i can't use a later version of ubuntu such as 12.04.2 LTS ?

Can someone edit me on skype and help me please with this release?

skypename:john.jakson7

Quote:

---

Originally Posted by shard1976

question, is there any specific reason i can't use a later version of ubuntu such as 12.04.2 LTS ?

---

If you can get it to work on anything later than that, go for it. I managed to get it working on a vbox with 12.10 but it limpped and it was hard. I couldn't get PW Admin to work properly either.

Mounting the disk would not work without manually adding a loop for it among other things as well as the pwadmin issue. It's more trouble than it's worth at the end of the day.

I did not want to go through it all over again with the test server then again on the production server so I decided to just downgrade to the version you can download on the original post. It save's a lot of hassle and most companies will install it on dedicated servers on request.

nice release.

Major update coming :wink:

Still don't have an exact date, but I assure you it's coming :wink:

Quote:

---

Originally Posted by 343

Major update coming :wink:

Still don't have an exact date, but I assure you it's coming :wink:

---

Do you have a list of updates are you doing? If not, not to worry.

We haven't gone live yet. Is it close enough for us to just hang back and wait for it?

___

Falney