[Help] add the QuickJobChange In Source

**flyff024** · 28-04-12

I Have Some Question Regarding About Your (How To Put Quick Job Change On Source)Release

When I Put The Codes And Compile It With No Errors,
After Then When I Will Test It When i Click THe Picture There is Nothing Happened.

Is There A Problem With The Code Or In Resdata's?

Hope You Will Reply

**omglike09** · 29-04-12

sir i`am little confused about adding quickjob changer to my source

i use v15 clean source .. but i find that DPClient.cpp is two

the one is in Official Source/Neuz
and the other one is in Official Source/CACHESERVER

which of them i will edit ?
or both of them?

sorry for bad english :(

help me please

**flyff024** · 29-04-12

Originally Posted by omglike09

sir i`am little confused about adding quickjob changer to my source

i use v15 clean source .. but i find that DPClient.cpp is two

the one is in Official Source/Neuz
and the other one is in Official Source/CACHESERVER

which of them i will edit ?
or both of them?

sorry for bad english :(

help me please

DPClient.ccp On Neuz Is The One To Be Edited

Hehehe :))) Xak Please Reply On My Prob

**extra300** · 01-05-12

pls help me T-T

e:\flyff\lawl\Official Source\Neuz\DPClient.cpp(19587): error C2065: 'PACKETTYPE_UPDATE_JOB' : undeclared identifier
e:\flyff\lawl\Official Source\Neuz\DPClient.cpp(19587): error C2593: 'operator <<' is ambiguous
e:\flyff\lawl\Official Source\_Network\Net2\include\dpmng.h(178): error C3861: '_beginthreadex': identifier not found, even with argument-dependent lookup
e:\flyff\lawl\Official Source\_Network\Net2\include\dpmng.h(178): error C3861: '_beginthreadex': identifier not found, even with argument-dependent lookup
e:\flyff\lawl\Official Source\AccountServer\DBManager.cpp(43): error C3861: '_beginthreadex': identifier not found, even with argument-dependent lookup
e:\flyff\lawl\Official Source\_Network\Net2\include\dpmng.h(178): error C3861: '_beginthreadex': identifier not found, even with argument-dependent lookup
e:\flyff\lawl\Official Source\_Network\Net2\include\dpmng.h(178): error C3861: '_beginthreadex': identifier not found, even with argument-dependent lookup
e:\flyff\lawl\Official Source\WORLDSERVER\ItemUpgrade.cpp(1406): warning C4244: '=' : conversion from 'float' to 'int', possible loss of data
e:\flyff\lawl\Official Source\WORLDSERVER\ItemUpgrade.cpp(1481): warning C4244: 'argument' : conversion from 'DWORD' to 'BYTE', possible loss of data
e:\flyff\lawl\Official Source\WORLDSERVER\ItemUpgrade.cpp(1482): warning C4244: 'argument' : conversion from 'DWORD' to 'BYTE', possible loss of data
e:\flyff\lawl\Official Source\WORLDSERVER\ItemUpgrade.cpp(1491): warning C4244: 'argument' : conversion from 'DWORD' to 'BYTE', possible loss of data
e:\flyff\lawl\Official Source\WORLDSERVER\ItemUpgrade.cpp(1605): warning C4018: '>=' : signed/unsigned mismatch
e:\flyff\lawl\Official Source\WORLDSERVER\DPSrvr.cpp(566): error C2065: 'PACKETTYPE_UPDATE_JOB' : undeclared identifier

**extra300** · 02-05-12

Spoiler:

MoverParam.cpp error pls help me T-T

**RynoKabbage** · 02-05-12

hello:

so i tried this out. and when using your code you posted for WndChangeJobEx.cpp i get his error:

Code:

c:\Documents and Settings\Ryno\Desktop\Blessed Source\Official Source\Neuz\WndChangeJobEx.cpp(122): error C2065: 'nApply' : undeclared identifier
c:\Documents and Settings\Ryno\Desktop\Blessed Source\Official Source\Neuz\WndChangeJobEx.cpp(122): error C2227: left of '->EnableWindow' must point to class/struct/union
        type is ''unknown-type''

so i tried using the WndChangejobEx.cpp that came with the packet and it compiles with no errors. so i moved the resdata.inc, resdata.h and resdata.txt to the server files along with the newly compiled exe files but when i get to the lvl of a job change nothing shows up?
any way to fix this? i followed the tut perfectly.

**extra300** · 07-05-12

sir pls help me

**exoth4595** · 16-05-12

@KING5

if you are using roc source then already put the fix.. remove the fix for MAX_LEGEND_LEVEL 99% fix..

if you remove that when you reach level 130 it will not be 99% anymore but 0 %

sorry for my bad english just wnna help..

**exoth4595** · 25-05-12

sir zaksi., can u help me how to remove d Master and Hero job change here.?

**Puffie** · 28-06-12

So..

For me, Hero and 3rd Job windows aren't opening. Any ideas how to fix that?
I've tried to put that window to hotkey. Problem is - Hero's working fine, but it doesn't appear, instead of 3rd Jobs, it says just "Error".

Any ideas fixin' that?

// NVM, I've fixed it. If you want to know how to fix, just say it.

**CielPhantom** · 10-07-12

Spoiler:

Considering it has APP_ in it i was considering that it might be an issue inside of Resdata.h but i was unsure and could not find anything when i searched for "APP_MESSAGEBOX_OK_CANCLE"

If any assistance is given i shall respond with a like/rep boost.

**audisbroder** · 21-08-12

Originally Posted by DrBlowFish

GIve Credits to Pumbaa for coding, and ClouD for Translations.
Also put up a working DL link?

Originally Posted by Xakzi

Credits goes for the guy who released in at ePVP (Sorry but Im lazy to check who u are

Guessing Pumbaaa since your name is in the code

)

And about the DL link, Download links for QuickJobchange.7z - Mirrorcreator - Upload files to multiple hosts.

**TFXKasutaja** · 26-08-12

Can someone help, i'm having some kinda errors with neuz after added this. The error log is here

WndWebBox1.obj : error LNK2005: "public: __thiscall CWndWebBox::CWndWebBox(void)" (??0CWndWebBox@@QAE@XZ) already defined in WndWebBox.obj
WndWebBox1.obj : error LNK2005: "public: virtual __thiscall CWndWebBox::~CWndWebBox(void)" (??1CWndWebBox@@UAE@XZ) already defined in WndWebBox.obj
MoverParam.obj : error LNK2019: unresolved external symbol "public: __thiscall CWndJobChangeEx::CWndJobChangeEx(void)" (??0CWndJobChangeEx@@QAE@XZ) referenced in function "public: int __thiscall CMover::SetExperience(__int64,int)" (?SetExperience@CMover@@QAEH_JH@Z)
.\..\..\Output\Neuz\NoGameguard/Neuz.exe : fatal error LNK1120: 1 unresolved externals

**GuilhermeL** · 21-10-12

I managed to do just fine without error Compiled, but when Tightening the picture does not change the job area someone could help me?

Since ja grateful

Srry my bad english

**flyff024** · 23-10-12

C:\Users\PRINTER\Desktop\Blessed Source\Official Source\_Common\Mover.cpp(5902): error C2601: 'CMover::InitLevelPumbaaa' : local function definitions are illegal
#ifdef __QUICKJOBCHANGE
void CMover::InitLevelPumbaaa( int nJob, LONG nLevel, BOOL bGamma )
{
#ifdef __WORLDSERVER

Please Help......

[Help] add the QuickJobChange In Source

Thread Tools

Re: How to add the QuickJobChange In Source

Re: [how to][tutorial] add the QuickJobChange In Source

Re: [how to][tutorial] add the QuickJobChange In Source

Re: [how to][tutorial] add the QuickJobChange In Source

Re: [how to][tutorial] add the QuickJobChange In Source

Re: [how to][tutorial] add the QuickJobChange In Source

Re: [how to][tutorial] add the QuickJobChange In Source

Re: [how to][tutorial] add the QuickJobChange In Source

Re: [how to][tutorial] add the QuickJobChange In Source

Re: [how to][tutorial] add the QuickJobChange In Source

Re: How to add the QuickJobChange In Source

Re: How to add the QuickJobChange In Source

Re: [how to][tutorial] add the QuickJobChange In Source

Re: How to add the QuickJobChange In Source

Re: [how to][tutorial] add the QuickJobChange In Source

Advertisement