[Release] RAN IP Interceptor v1.09 (Bye Hamachi and WPE Project)

already set it...
CFG = Set lan Ip
Port Setup = All Port Open..

but still char cant in...

pc problem?

my PC core i7 ht 16GM ram 1.5TB x2 HDD..
Internet speed 4mbps...

i have make another server 100% succes..
but when i want make ran Ep6 s2 character cant play..

where can i find that login_cofig?? sorry for noob question

@loyalz12 - you can find your login_config file inside your ran server folder and inside your ran server folder there's a config (CFG) folder where your config files located, and one of them are your login_config file. Hope you'll understand this.

---------- Post added at 06:50 PM ---------- Previous post was at 06:44 PM ----------

@loyalz12 - The question is to sir pyro, after we install the Ran Ip interceptor in our server and it run perfectly without any error, how do our player connect to our server? And what ip address do we write in, in the param.ini of our client installer?

Param Ip put ur wan ip....

guys when i start ran ip interceptor i got this error.

Quote:

---

Originally Posted by yetb0

guys when i start ran ip interceptor i got this error.

---

open riinconfig.
and find this :
~login_config_path cfg\slogin.cfg

Another 1 why ur login CFG put this (slogin.ini)..
lor it will read slogin.ini.cfg..

Rename it to slogin....

thanks shawrin its working now.
another question about port forwarding.
what port will i forward in my cfg?
do i need to port forward the service port of all cfg?
do i need to forward this?
server_service_port 5003
server_control_port 6003

i have a dynamic IP what IP will i use the LAN IP or the WAN IP?

Yup.....
PARAM = WAN ip

the first time i use RAN IP interceptor i succesfully connect LAN/ONLINE then i turn off my modem and router for hours then turn it on again then i change the param wan ip again bacause i have a dynamic ip connect again "character failed" now i cant connect agin.

u hv changed back rosed cfg ip...?

the IP list of rosed cfg sir? yup i change that also.

change all cfg...
if still character process failed i dont know...

because i got that problem to...
that problem like svr field port not open but when your check its open...

i got problem :(


Detecting IP Address...
IP Detected: 66.7.213.62

that ip is not my IP :(
then i cant connect to my server ... :(
that ip was show when i run or execute my ran interceptor..
then when my real ip 121.x.x.x was show .. after a minute ..
it will be change or being updated to 66.7.213.62
w/ out doing anything...

since it must be .. my is 112.x.x.x

:( ... please help me ..


please help me co ragezoner .. thanks ..

what should i do ...?


please help me :(