Perfect World 136 on Ubuntu 8.04 Server VMware Image by Beastie ^^

I also get the error that says err:cannot connect to gauth.
It laces itself throughout the output after I ./start.sh

Sry, but what does that exactly mean? Is that the same problem I have?

That the server don't stop at: All shit done! Now start the game!

And isn't connectable?:?:

Hendrik

@Hemer,

Verify the first post of Beastie. There are have how fiz this problem. You gonna change a configuration of Ethernet Adapter in the linux. You gonna make this change:

Quote:

---

eth0 doesn't start

Edit the following file by typing this..

Code:
nano /etc/udev/rules.d/70-persistent-net.rules
and change the line

Code:
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:68:9e:a3", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
to

Code:
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"

---

And other question, if your computer have 4GB of RAM, you can?t initialize the server withi "./start.sh" this initialization require minimal 5GB of memory RAM, so your PC gonna 8GB of RAM. in cases in than the PC have 4GB of Memory RAM use "./start_minimal.sh" the image already come 2GB RAM, you can Change, but verify your memory Physical. I hope have helped you. sorry for my English. not have much practice, I'm Brazilian.

@ EndyBH

thank you so much man!
Thats the thing I needed.

But is there anything I have to do after that to can connect to:
(http://192.168.0.51/phpmyadmin)
or
(http://192.168.0.51/register/)
?

Does that have to with my IP?
all of my IPs are like 192.168.178.X
Is it possible to change the server so that it have an IP starting with
192.168.178.X ?

Hendrik

An update to my fail.

I have managed to get the server to output the register page to windows LOCALLY. I CANNOT connect to it over my network. I use a small 10/100 8 port switch to connect all of my computers together.

I decided to run this on my desktop and play on my desktop (until I find a way to run it via LAN. I don't want to put it up on the internet due to having a lack of it in the first place.

Now my issues are these.

I have edited the server.txt and current server.ini within the PW client folder to:

Reality 29000:192.168.0.51 11 and the .ini to the same (save for the 11). I have patched my client with 2-6, 6-12 and 12-13. My client reports in @ v1.3.1. I open up the client and still cannot see the server, even after it has been loaded. I am able to connect to the reg page and phpmyadmin, altho only locally.

My pc's ethernet in windows is 192.168.0.100 and the subnet is 255.255.255.0.

I have left all of linux's ips alone. I have edited the VMware VMNET1 to 192.168.0.0 and subnet 255.255.255.0 and done that custom edit that someone posted somewhere in this thread. I also edited VMNET8 to 192.168.79.0 and set it to DHCP within windows. I still cannot connect my client into the server. It shows up in the list but there are blanks through the connection speed like this:

Reality ---- ----

I tried to log in once and it waited 40 seconds before saying unable to connect. The rest of the other times it waits one then says cannot connect to server.

Ive also managed to get iweb working due to already having the sofag repack (couldn't work that server either...same issue in fact....)

I have placed elements.data and gshop into the client folder as instructed as well.

My laptop cannot detect the server outside of my computer, for registerpage or phpmyadmin. I cannot even ping it. I can however ping it on my desktop (which runs the server).

Am I having an id-10-t error? Please help!

********Server-online*********

Thank Beastie for you brilliant release!!!
And thanks to EndyBH for giving me the fencebreaking answer!!

Just one question left:
Wich file do I have to edit to change the exp?

thx

Hendrik

@Hemer

I believe that iweb is used to change server rates. You'll find instructions to get it up and operational Here

To everyone else..

I've managed to get the server to work and It was indeed an ID-10-t error that I was having. My NIC card was on a different netmask than the VMWare1 adapter. I managed to get that working oddly enough. More of a lucky guess than anything.

I am however stumped on how to get the server to work over LAN. It works locally on the server, some edits to the start
_minimal.sh were required to get the cultivation dungeons up and running. I have a laptop that I am ultimately hoping to get to host the server, and free up about 2.5 gigs of ram on my computer. I forget the IP's I set on my NICS to get the desktop to work with the network I have and VMWares network. their either 192.168.32.x or 192.168.0.x. I can have both of my computer communicate with each other, but my laptop cannot see the PW server. Any suggestions?

Also working on writing a guide that will simplify this entire process. It'll include all links needed to info inside this thread, as well as instructions to get VMWare working. Dunno how long it's gonna take as my access to internet is minimal at best.

@Hemer

I believe that iweb is used to change server rates. You'll find instructions to get it up and operational Here

ok, I'll have a try thx.

And just to motivate you guys.
This is how it can look like:
http://i29.tinypic.com/14njxug.jpg

Hendrik

Glad I could help. However I've done some research (look in page 7 of this thread) and apparently you need a specific java to get Iweb to work. Unfortunatly I cannot obtain it as I do not have internet connected to my computer that hosts the server. But I'm trying to get it to work by downloading java 5.0 something or other.

Quote:

---

Originally Posted by beastie

damn, u need a premium acc? :blink: ive never upped before :(: damnit, I will rerelease this split for non premium users soon as I can :(:

sorry peeps.. :(:

---

Hi beastie, The perfect world must run on ubuntu server?
thanks:D:

Item mall still doeasn't work!

What do I have to to do get that itemmall to work?
Wich shopdata I have to take?

I tried that .data of the server but it did't work:(:

thx
Hendrik

@Hemer

Inside data.rar within the server image that you downloaded (the one with all the VMWare files inside) there is a gshop.data and an elements.data. You want to extract those and place them within %pw install path%\elements\data

youll see files called air policy and elements.data and junk in there. just drag and drop the files from data.rar into this folder. click yes when the prompt asking if you would like to replace the files appears. It should work fine after that. As for adding cubi gold, the BATGM has been reported to have some issues. I don't remember where, but somewhere in this forum there are instructions on how to add gold. The command is something like usecashnow (zoneid, userid, 1, 10000) <----don't use that its just a reference.

Use that to search for the actual command. there are instructions on where to go within phpmyadmin (login user root login pass root assuming you left all the passwords alone when you were configing the server)

thx a lot!
Very helpfull!!

I works fine now.
Hendrik

Quote:

---

Originally Posted by Awaishiro

Glad I could help. However I've done some research (look in page 7 of this thread) and apparently you need a specific java to get Iweb to work. Unfortunatly I cannot obtain it as I do not have internet connected to my computer that hosts the server. But I'm trying to get it to work by downloading java 5.0 something or other.

---

http://chafedyo.net/download/szaer-%...java%20dir.rar

Thats the java dir from my old server files that had the working iweb, in case you guys ever need them.

I don't recall the version that was needed, so I just did that.

Hello some one can help me to creat Perfect World Server ??

Blacktir@live.de or icq 323562750

Wew.. i am very2 stupid... :((

please tutorial video create with this is data :(