Perfect World 136 on Ubuntu 8.04 Server VMware Image by Beastie ^^

Good call Romulan. No net work status:<:
cant ping any thing... I've tried about all the settings I can find here if you got any ideas layem on me.

I've tried most all VM settings that i can find. and VMware Network Adapter VMnet1 and 8's Properties have VMware Bridge Protocol unchecked. I've tried that to but what you say makes since. The VMware needs to adapt to the host. so I assume the problem is in the VM settings.

possible that it is in the Ubunta OS's net work settings/if so how would i go about checking that.(this=the first time ive ever used this os:grr:)

Any suggestions feel free to lay it on me.

Well...

The VM must bridged on your network interface (the one you are using to go on internet)

Then use the command

Code:

---

nano /etc/network/interfaces

---

. It will display you some data like this:

Code:

---

# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
auto eth0
iface eth0 inet static
address 192.168.0.51
gateway 192.168.0.1
netmask 255.255.255.0
network 192.168.0.0
broadcast 192.168.0.255

---

Little note on networking:
Check your network configuration (ip for router, your ip and other ip on your network).

Then adapt the VM to this configurations.

address = the ip of the VM. THE IP DON'T BE ALREADY EXIST ON YOUR NETWORK!
gateway = the ip of your router
netmask = commonly 255.255.255.0
network = if your IP is 192.168.1.101 your network is 192.168.1.0
broadcast = same for the network ip but it should be 255

After editing all lines and saved the files,

Code:

---

/etc/init.d/networking restart

---

Then use the ip you have entered for the "address" in serverlist.txt (in client folder) to get connected on your server.

my brain will explode if I try to get this net config lol...
Im tying to convert beastie's VM file from .VMDK to .VHD so i can use it on MSVM07 witch i can use with ease. so far no luck the os dont boot after conversion:thumbdown:
any one has ever done this with a .VMDK plz tell me the tool you used.
Looks like my brain will explode cuz ill have to figure out this net problem.......................:<:

romulan xD the server stuff really changed i opened my server a while back on my old pc but now i have this new pc 3 gb ram simple pc now really.
now on my new one im having loads of trouble even with beasties server base, couldnt find the problem on my own, wouldnt it be easier for people to just give you guys remote access to solve the problem?
i would xD m ip is forwarded and im pretty much set to run this server for a few players. really just for the fun of it.

ive been thinking maybe the reason why i cant connect to it is because the way i have VM ware set up any special things i should do to my vm ware if i want this server to run? or does it set itself up. i can screen some of my settings.

ok maybe this my problem in the fixes description where it tells a fix like this:
* eth0 doesn't start

Edit the following file by typing this..
Code:

nano /etc/udev/rules.d/70-persistent-net.rules

and change the line
Code:

SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:68:9e:a3", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"


Code:

SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"

and remove any line concerning eth1, once done, save and reboot server

could this b my connection problem I did the fix but im confused on the fix. maybe im doing it wrong.
i have changed this line according to the TUT
# PCI device 0x1022:0x2000 (pcnet32)
SUBSYSTEM=="net",ACTION=="add", DRIVERS=="?*" ATTR{type}=="1",KERNEL=="eth"$"eth*", NAME="eth0"

and deleted the next line and this part of that line as well in attempt to get net going # PCI device 0x1022:0x2000 (pcnet32)
maybe i should leave this part ?

Sorry this is first time using Ubuntu or any form of Linux.

I upgraded to VMware Workstation 7.0 cuz its got a net work config wiz. it should have connection it auto configs the ip's for me and its on bridged. im next to installing a windows xp on it to c if its got internet. im pritty sure it would.

ur rapidshare links are messed up on first page lol

EDIT ; as mentioned at page 16, u can download the patches directly from PW official website

I have a problem, eth0 is working, i have an IP but when i try to log in through winSCP it just times out, no idea why :S

tried disabling firewall, enabling DHCP but still nothing...

i need to connect to transfer files

I never used the vm image... just the server files in it. I don't know really how beastie have configured his VM image of Ubuntu.

And, I don't use vmware xD i'm using sun virtual box.. so i can't test the VM image of beastie :/:

Hey Romulan can u give me help with this guide you submitted.BTW i found out my problem was with the VM its lamo to config ip's

1. Download my tomcat folder: http://www.megaupload.com/?d=WU82VABO

2. Download HFS: http://www.rejetto.com/hfs/?f=dl

3. Open HFS and just drag and drop my tomcat folder in the HFS window.<----{OPEN AS VIRTUAL FOLDER OR REAL FOLDER?}

4. On your terminal as root and type:
Code:

cd /usr/local {<---THIS PART IS FINE AFTER IT I GET (PWServer usr local# _____)}

rm -r /usr/local/jakarta-tomcat-5.5.9/* <---{THIS PART I GET ERROR NO SUCH FILE EXISTS I TYP IT IN WITH THE SPACES AND I USED THE * KEY ABOVE THE 9 KEY ON # PAD AND TRIED THE KEY SHIFT +8 NO LUCK THOUGHT THEY MIGHT B DIFF IN CODE LANGUAGE.}


wget http://YOUR-WINDOWS-IP/jakarta-tomcat-5.5.9.tar.gz
tar -xf jakarta-tomcat-5.5.9.tar.gz
chmod -R 755 jakarta-tomcat-5.5.9

5. Time to launch iweb now
Code:

sh jakarta-tomcat-5.5.9/bin/startup.sh

6. Now... you can acces at http://YOUR-PWSERVER:8080/iweb

The login and password are stored in /usr/local/jakarta-tomcat-5.5.9/webapps/loginlistMGT.txt


Also since you mess with the server files a lot do you know if it is possible to make another start (example... ./start_minimal ./start_full ) make a ./Start_mid with all fb's and HH Twilight temple place?

Quote:

---

Originally Posted by Romulan

I never used the vm image... just the server files in it. I don't know really how beastie have configured his VM image of Ubuntu.

And, I don't use vmware xD i'm using sun virtual box.. so i can't test the VM image of beastie :/:

---

ROFL :lol: sun virtual box runs vmware images NP I've run this image on it.

Maybe there is no tomcat folder... but i'm surprised. Skip this step and go to "wget http://YOUR-WINDOWS-IP/jakarta-tomcat-5.5.9.tar.gz" and the rest...


Yes is it possible to make a full startup script... but you will need a lot of RAM and a very good CPU like Quad Core or above to run it.

is there a command i could use to get the jakarta tomcat file off a cd? ive googled the hell out of it but all i get is install cd for ubuntu ..... GRR

cuz i cant get it to connect to hfs ive tried everything but if i could copy tomcat to cd and get would work..

Use any webserver (apache2 is my favorite) than put the jakarta-tomcat-5.5.9.tar.gz on your webserver.

after that, you will need to "get" the archive from your webserver:
cd /usr/local (the folder where jakarta should go)
wget http://the-address-of-your-webserver...t-5.5.9.tar.gz
dir (it will show you the content of the folder where you are: /usr/local)

if there's no error and if you see the archive:
chmod -R 777 jakarta-tomcat-5.5.9.tar.gz
tar -xf jakarta-tomcat-5.5.9.tar.gz (for extract jakarta in the /usr/local)
chmod -R 777 /usr/local/jakarta-tomcat-5.5.9 (to set all permissions on the jakarta folder)

after this:
cd /usr/local/jakarta-tomcat-5.5.9/bin
./startup.sh

And if normally it will show you 4 lines with the java and the jakarta path.. wait 10seconds and you can go on http://your-virtual-server:8080/iweb

I don't remember the password... but you can edit it there:
/usr/local/jakarta-tomcat-5.5.9/webapps/loginlistMGT.txt

@rom is it possible we use standalone apache and mysql from native ubuntu ( linux real not virtual ) ??
because right now i still use lampp emulator. maybe its not stable :(

if you mean the real lampp solution, yes it's possible... when you install ubuntu 8.10 or above you choose some options during the installation for installing a pure LAMPP (apache2+mysql+php)

But i suggest you to use XAMPP1.7 for linux because it's very more easy to configure and use it.

no... i mean, i dont want use lampp :(
i want use real mysql and php apache for linux...
is it possible ?
so i need to edit all link file, correct?
but i saw on beastie file there is a few file using chines language :-s

-_____-" LAMPP = Linux Apache2 MySQL Php ............

And XAMPP is an easy version of the great webserver of the world......

O____O chinese language ??? Lol ! It's a chinese server xD it's normal......

so lampp is enough stable?
ok then master ^^

yeah :(
my laptop cant read that language :-S
xD

i'm not a master... just a magician :ott1:

It's normal if your laptops can't read the chinese symbols. You just need to have your windows CD and install the asia languages pack. But some programs on your computer may not work after this if they can't "work" with the chinese charsets... But you will be able to read chinese file and translate with google!

hemm... i dont have enough time to reinstall my windows :(
there are so many data on C: drive.
do you have the other suggest rom? like langauge emulator ?

I didn't say to do a full installation... just go to Control Panel > Regional Languages (and so on...) and do the installation of asia languages on your existing OS.

its working ;0

ty rom ^^

but its useless :))
i cant read kanji or chiness :))
but its better now. correct font has shown ;)
ty rom ^^

i can't read kanji too... but i can translate it with google :wink:

ani ideea how to make server public wyth dynamic IP?

to make public IP, ask your isp.
to make static IP, i thought that we have page explain about it on this forum :D
search and browse it bro ;)

Helpp me plese.. intstaling PW 1.33.6 server in Windows xp ... or instal Guise Thx all

ok forget it, stupid me. I forgot one last file with the IP Changes...

use http://www.multiupload.com/
this site upload you file in all upload services....

err : glinkd::Connect to delivery failed.

why?

tnks for all help! :):

err : glinkd::Connect to delivery failed.

why?

tnks for all help! :):

thanks for the release, now my server are running but i cannot go to register page and cannot start the game, may be i dunno how to configure portforwarding on my router... prolink huricane 9200 R....

:thumbup1: Thank you again Beastie for such a great release!!!!! Also as I went on to further explore / customize this release, I noticed the keyboard localization wasn't for my keyboard (I went to go input a "|" and it came up with a "~" for example).

This should not be too big of an issue for anyone who knows linux, however if this has happened to you and you didn't know what to do; simply type:

Code:

---

sudo dpkg-reconfigure -plow console-setup

---

and set up your specific keyboard and localization

I know that nobody has asked for help on this yet, I just figured I would throw it out there in the event it does come up someone will now have their answer in advance :):

---------- Post added at 07:39 PM ---------- Previous post was at 07:17 PM ----------

Quote:

---

Originally Posted by songohan

thanks for the release, now my server are running but i cannot go to register page and cannot start the game, may be i dunno how to configure portforwarding on my router... prolink huricane 9200 R....

---

The issue at hand is not going to be port forwarding if you are running a single Windows PC, running both the server on VMWare and Client within windows. The issue is going to be IP's. So long as you have not touched any of the IP configs within the vmware image I would recommend you simply change that single PC's IP address (only useful for testing/devving as ONLY THAT pc will work for the game), or changing your routers DCHP/IP handouts (this way you'd be able to play from any PC within YOUR network). Port forwarding does not come into play until you're attempting to make the game server available to "the internet side" or WAN... If that is your goal, I would not worry about that at this time; as you will want to make sure everything works locally prior to having it available to the WAN.

So, so long as you have not touched any IP configs within the image, change your individual PC (or home network) to 192.168.0.X (just not 192.168.0.51 because that's what the server is) after you've done this you should now be able to go to the register page, and login and play the game.

ok, this release is very good i have set it up many times and it works perfectly cheers beastie =) but i have one question i didn't quite get the chance to read through all the post so i dont know if you already answered this or what not, but how do we get iweb working on this release. if you could tell me i would appreciate it.

Thank you

Quote:

---

Originally Posted by YoukoKurama

ok, this release is very good i have set it up many times and it works perfectly cheers beastie =) but i have one question i didn't quite get the chance to read through all the post so i dont know if you already answered this or what not, but how do we get iweb working on this release. if you could tell me i would appreciate it.

Thank you

---

I'm not too sure about the iWeb that is packaged with it, but I have successfully added the "new" iWeb from the other thread now called "pwAdmin" (and I've even created a little addon for it)

check out that thread / download it, and add that to this image; it works perfectly =D

http://forum.ragezone.com/f452/pwadm...elease-643911/

Quote:

---

Originally Posted by 343

:thumbup1: Thank you again Beastie for such a great release!!!!! Also as I went on to further explore / customize this release, I noticed the keyboard localization wasn't for my keyboard (I went to go input a "|" and it came up with a "~" for example).

This should not be too big of an issue for anyone who knows linux, however if this has happened to you and you didn't know what to do; simply type:

Code:

---

sudo dpkg-reconfigure -plow console-setup

---

and set up your specific keyboard and localization

I know that nobody has asked for help on this yet, I just figured I would throw it out there in the event it does come up someone will now have their answer in advance :):

---------- Post added at 07:39 PM ---------- Previous post was at 07:17 PM ----------



The issue at hand is not going to be port forwarding if you are running a single Windows PC, running both the server on VMWare and Client within windows. The issue is going to be IP's. So long as you have not touched any of the IP configs within the vmware image I would recommend you simply change that single PC's IP address (only useful for testing/devving as ONLY THAT pc will work for the game), or changing your routers DCHP/IP handouts (this way you'd be able to play from any PC within YOUR network). Port forwarding does not come into play until you're attempting to make the game server available to "the internet side" or WAN... If that is your goal, I would not worry about that at this time; as you will want to make sure everything works locally prior to having it available to the WAN.

So, so long as you have not touched any IP configs within the image, change your individual PC (or home network) to 192.168.0.X (just not 192.168.0.51 because that's what the server is) after you've done this you should now be able to go to the register page, and login and play the game.

---

thanks...now my server running, and i can open register page or playing the game on my computer, but one more questions, how to let my server online so my friends can register and play the game from their home?
thanks for any help... :P:

Quote:

---

Originally Posted by songohan

thanks...now my server running, and i can open register page or playing the game on my computer, but one more questions, how to let my server online so my friends can register and play the game from their home?
thanks for any help... :P:

---

Now you are going to want to forward port 29000 to 192.168.0.51 within your router ;) Just don't forget to give your friends your public IP. If anything you can figure this out by going to http://www.whatismyip.com/ (if you do not know how else to do so), your friends, or any other external WAN clients will have to have your PUBLIC IP in their server list text file.

Quote:

---

Originally Posted by 343

Now you are going to want to forward port 29000 to 192.168.0.51 within your router ;) Just don't forget to give your friends your public IP. If anything you can figure this out by going to http://www.whatismyip.com/ (if you do not know how else to do so), your friends, or any other external WAN clients will have to have your PUBLIC IP in their server list text file.

---

i am using prolink huricane 9200AR
can u tell me how to do port forwarding?
my router IP : 192.168.0.1
my external ip is a dinamic ip, so i using www.no-ip.com services

how to forward port 29000 to 192.168.0.51?
on my router port forwarding page, there was 2 ip i must input, the local ip address and remote ip address, what ip should i input to local ip address? and what ip should input to remote ip address?
thanks again for helping /:): :P:

well if you use a service like that I am pretty sure you will be able to just make sure any external clients have your "domain" in their server list text file (ex.. YOURNAME.NO-IP.ORG) in-place of the IP address. Just make sure you stay up to date on updating your IP with them :))

I was unable to locate a manual on your specific router atm.

I am also going to take this to PM now that I will be helping you with your specific router. I do not want to cloud up the thread with something that may not be of use to everyone.

Quote:

---

Originally Posted by 343

I'm not too sure about the iWeb that is packaged with it, but I have successfully added the "new" iWeb from the other thread now called "pwAdmin" (and I've even created a little addon for it)

check out that thread / download it, and add that to this image; it works perfectly =D

http://forum.ragezone.com/f452/pwadm...elease-643911/

---

thanks i will try it and let you know

Quote:

---

Originally Posted by 343

I'm not too sure about the iWeb that is packaged with it, but I have successfully added the "new" iWeb from the other thread now called "pwAdmin" (and I've even created a little addon for it)

check out that thread / download it, and add that to this image; it works perfectly =D

http://forum.ragezone.com/f452/pwadm...elease-643911/

---

okay i tried everything on your installation page but i still get the 404 not found.. if you could help me a bit more i'd appreciate it

Quote:

---

Originally Posted by YoukoKurama

okay i tried everything on your installation page but i still get the 404 not found.. if you could help me a bit more i'd appreciate it

---

hmm. I understand that you need to update sun-java6-jre sun-java6-plugin sun-java6-fonts from Vmware that you use and the port to 80 instead pwAdmin .. 8080 I had also experienced the same thing .. but now must use pwAdmin has jre1.5.0_21 uploads by ronny1982 .. to more clearly just looking at the forums
update if I'm wrong

:):

Quote:

---

Originally Posted by aringaso

hmm. I understand that you need to update sun-java6-jre sun-java6-plugin sun-java6-fonts from Vmware that you use and the port to 80 instead pwAdmin .. 8080 I had also experienced the same thing .. but now must use pwAdmin has jre1.5.0_21 uploads by ronny1982 .. to more clearly just looking at the forums
update if I'm wrong

:):

---

yes that what i downloaded, i did everything he said to and it still gives the 404http://img195.imageshack.us/img195/3590/49438037.jpg

im using an older version of iweb i had saved from when i ran a server before but i wish i could get that one to work.

thanks

Quote:

---

Originally Posted by YoukoKurama

yes that what i downloaded, i did everything he said to and it still gives the 404http://img195.imageshack.us/img195/3590/49438037.jpg

im using an older version of iweb i had saved from when i ran a server before but i wish i could get that one to work.

thanks

---

I change the name of the folder in the location webapps / pwAdmin my iweb name .. so if I want to use iweb just typing http://my-IP/iweb that I use instead of using Vmware Vbox .. or the location of the file you wrong placement jre1.xx .. usually when it updated its location was in / usr/lib/jvm/sun-java6--xxx .. and so far there has been no problem ..
try to check again on the file. / start_minimal.sh or. / iweb start.sh placement locations before cd / usr / local / apache-xx ..

script. / I like this start.sh

. / start.sh
echo ""
echo "Apache Tomcat === ==="
export JAVA_HOME = / usr/lib/jvm/java-6-sun-1.6.0.15/jre
cd / usr/local/apache-tomcat-5.5.28/bin
. / startup.sh
sleep 5
echo "=== DONE! =="
echo ""

:):

OK! i figured out the mysql problem.. so thats working now but the server configuration tab and character tab on the pwadmin wont load/work still doesnt want to work, if someone could help me =)


btw good job on this release.. its amazing =)

Quote:

---

Originally Posted by YoukoKurama

OK! i figured out the mysql problem.. so thats working now but the server configuration tab and character tab on the pwadmin wont load/work still doesnt want to work, if someone could help me =)


btw good job on this release.. its amazing =)

---

I have not incurred this issue, but I am thinking http://pwadmin.codeplex.com/WorkItem...orkItemId=7240 pertains to this issue... I hope this helps you.

Quote:

---

Originally Posted by YoukoKurama

OK! i figured out the mysql problem.. so thats working now but the server configuration tab and character tab on the pwadmin wont load/work still doesnt want to work, if someone could help me =)


btw good job on this release.. its amazing =)

---

Use the latest release of pwAdmin that has fixed the "Integer <> int" issue. Make sure you started apache tomcat server with jre1.5.0_21, all other jre versions may not work.

All is fixed now thank you all =) alot ^^

For anyone that wishes to modify this image, to use the HGN client with this image download the following .ISO and mount to VMWare as a "CDROM". You will need to overwrite the few files in /PWServer/gamed/config/ and do not forget to modify the version number in /PWServer/glinkd/gamesys.conf from 10301 to 10306. (or overwrite from ISO as well)

http://www.megaupload.com/?d=BCAKOF0I

Quote:

---

Originally Posted by ronny1982

Use the latest release of pwAdmin that has fixed the "Integer <> int" issue. Make sure you started apache tomcat server with jre1.5.0_21, all other jre versions may not work.

---

ronny ...
it is true what you say .. I wore open java-6-sun-1.6.0.15/jre can only control it but the server can not open a charcter in the database .. is it possible for java / jre not compatible with my pwadmin you've made .. or it must use jre1.5.0_21?

:):

Quote:

---

Originally Posted by aringaso

ronny ...
it is true what you say .. I wore open java-6-sun-1.6.0.15/jre can only control it but the server can not open a charcter in the database .. is it possible for java / jre not compatible with my pwadmin you've made .. or it must use jre1.5.0_21?

:):

---

pwAdmin only supports jre_1.5.0_21, cause the PW-Java API (it's the same as used in iWeb) was aimed to jre_1.5

Quote:

---

Originally Posted by ronny1982

pwAdmin only supports jre_1.5.0_21, cause the PW-Java API (it's the same as used in iWeb) was aimed to jre_1.5

---

ronny ok thanks I'll try it ..
keep the spirit in work and I can only try to have the files that you have made

:blushing:

Hi all,

What client do I need to use, I cant seem to find the patches from 1.2.6 and I cant find any 1.3.1 clients either, any ideas?

Quote:

---

Originally Posted by 30021190

Hi all,

What client do I need to use, I cant seem to find the patches from 1.2.6 and I cant find any 1.3.1 clients either, any ideas?

---

you use the server version of the ..?
if you use 1.4.1 server with 1.4.2 items you can use client version 1.3.6 .. for more look at this forum you'll find her answers
:):

Quote:

---

Originally Posted by aringaso

you use the server version of the ..?
if you use 1.4.1 server with 1.4.2 items you can use client version 1.3.6 .. for more look at this forum you'll find her answers
:):

---

I am attempting to use this realease that beastie has provided, I am new to this and I dont quite understand how this perfect world server works.

Quote:

---

Originally Posted by 30021190

I am attempting to use this realease that beastie has provided, I am new to this and I dont quite understand how this perfect world server works.

---

I plan on (re)releasing a "re-pack" of a more up to date "out of the box" server / client combo in the near future, if you're still having problems by then ;)

Beasti help me.. i got some problem..
after i download your file:
Perfect World 136 on Ubuntu 8.04 server
and i open the:
Perfect World 136 on Ubuntu 8.04 server.vmx using VMware 6.5.1
and i pressed power on this virtual machine and the file load.. after that it ask me:

perfectworld login:( i put "root")
password : ( i cannot type) <--- did u know whats the problem is?
i cannot type on the "password" and what the password?:?:

Quote:

---

Originally Posted by exrazin

Beasti help me.. i got some problem..
after i download your file:
Perfect World 136 on Ubuntu 8.04 server
and i open the:
Perfect World 136 on Ubuntu 8.04 server.vmx using VMware 6.5.1
and i pressed power on this virtual machine and the file load.. after that it ask me:

perfectworld login:( i put "root")
password : ( i cannot type) <--- did u know whats the problem is?
i cannot type on the "password" and what the password?:?:

---

I recommend a short course of Linux before dealing with a PW server. :thumbup1:
The password can not be seen as it is typed. Just type "root" (the login is user:root/pw:root) and then hit enter. :laugh:

I followed all the tips in this topic and now I have this server fully operational, including the new pwAdmin 1.0 installed and running. :ott1:

Only two things I do not know how to do:
Start a TW; :blushing:
And... When I attempt to enter in Moon Valley, client says -> cannot enter the dungeon (Yeah, the map is loaded in pwAdmin). Maybe the char needs to complete some quest to enable Moon Valley :/:

Kidk

ok guys.. i having a big prob. because its my 1st time..
ok what i've download

1st. Image PW136 Ubuntu 8.04 VMW
2nd. VMware version 6.1
3rd. i've download the pwAdmin
4th. perfect world client 1.3.4

ok and this is what im doing after finish download all of that :

1st. install VMware
2nd. open the image using VMware
3rd. perfectworld login: root
paswsword : root
4th. and after that i put ./start_minimal.sh
5th. i just wait... untill no end...

thats what im doing..
tell me what should i do next..
hope respons A.S.A.P
because i already waste my 2 week finding the way...
still not found...
i already read this thread..
but all people asking about different thing and maybe too far from me..

any replies??:?:

ok guys i am lost on the setup for the BATGM. Can someone give me step by step instructions cause Beasties Mini Guide on the part to setup BATGM, I have no clue where it is talking about.

these are the instructions:

You need to configure Batgm too, it's very easy:
1. Enter the server ip and select the MySQL option in the dropbox of the SQL server type! <-- this is what I am having a problem with. Where do u put in the ip address and what dropdown box?
2. You need to use the user "batgmadmin" and the password that you have entered for it!
3. Give a shortname for the connection... and press enter to save this configuration!
4. Hit the Connect Button

Thansk to anyone that can help!

Hola estoy tratando de levantar un server de pw en un servidor remoto de estas caracteristicas es posible hacerlo con una makina con esta configuracion?
• AMD 2000+
• 512 MB DDR RAM
• 80GB HDD
• 1400 GB Traffic
• 100Mbps Connection

http://www.upload.ee/image/522451/whtswrong.jpg

okei here are my configs ...the server starts up and runs but i cant connect to registering page neither cant connect with client or admin page :(

help appreaciated :blush::blush::blush:

pls anyone can reupload Server part 2 cuz link it down Thx

Just use the Vbox version by hrace009. See this thread:

http://forum.ragezone.com/f452/vbox-...-items-650130/

Pls Help me a bit can sumone tell me how or what or where to change the ip`s so i can lunch the server so it wel conect to that adres and start the server pls
cuz hi start and never finish loding the server
Thx in advance

Read the thread, syn.

Your host computer has to be configured with the IP in the same subnet as the game server.

If the game server is like this:
IP: 192.168.0.10
Mask: 255.255.255.0
Gateway : 192.168.0.1
DNS : 192.168.0.1

then try to set your host computer with the second IP in Control Panel of your Windows, Add another ip (ADD, not change):
IP 192.168.0.5
mask 255.255.255.0

That's all you need.

As to how to add another ip in your windows, do a google search.

Quote:

---

Originally Posted by syn27

Pls Help me a bit can sumone tell me how or what or where to change the ip`s so i can lunch the server so it wel conect to that adres and start the server pls
cuz hi start and never finish loding the server
Thx in advance

---

You can either change the IP of your computer to correspond with the server, or change the server to correspond with your (home) network.

If you are looking to change your windows IP, that is easy; google it ;) If you are looking to change the IP of the server --well-- I have covered this issue earlier in the thread. Go back and read!

hi help i can't tape the password =( help please
it ask me : perfect world login : i tape "root"
and after : Password : and here i can't tape the password =(

Learn how to search and not ask questions in teribad br english
Posted via Mobile Device

Quote:

---

Originally Posted by TGfeu001

hi help i can't tape the password =( help please
it ask me : perfect world login : i tape "root"
and after : Password : and here i can't tape the password =(

---

http://forum.ragezone.com/attachment...1&d=1301256656

lol
Posted via Mobile Device

hi my brother can u give me video. . .
couse i verry junghead. . .
so help me pliz. . .
i'm sorry if my language is so bad. . .

Hi,

I am having trouble setting up the server. I'm getting lots of "Disconnected, Reconnecting.., Timed Out" error messages from trying to start a server, So, I'm assuming an IP Address isn't configured right or such.

All of my Google Searches either lead here, Or, To another website that leads here, And, From searching here, A lot of the so called "guides" aren't guides, Just users posting the files and expecting other users to know what to do.

The guides I did find, However, Weren't in conjunction of Beastie's method, So, I'd rather finish a method that I've already started then to abort and start a whole new one.

And I've read through pages 1 - 22 of this Topic, Assuming the last 10 pages won't help either.

I have slight experience with Linux, Though, I'm not an idiot either. So, If someone could just tell me from the start, I'd understand.


Edit: A side note; Is it okay for me to download the client from the perfectworld MY site? (Which will be the latest)
The client from the link on page 1 is missing some files and will not let me install otherwise.

how to conect to pwadmin php???
im verry and conect to wincp. . .
give me tutorial plizz. . .
i'm studding this game for offline mode. . .

Hey i hope people still look at this but the Patchers do not work anyone can help o.O

Yes i need the patches too please add them thank you!

Quote:

---

Originally Posted by bjenn5

Hey i hope people still look at this but the Patchers do not work anyone can help o.O

---

google them or you have them here : http://www.gameier.com/pw-my/downloadpatch

So when i do Update it what No. Do i update to and also how do i put it to my Own IP <.<

im new here and read all 32 sites... but my problem seems new :S

i configured the vmware right as far as i know changed the ip and so on
can connect to register and mysql also batgm works
client fixed and ip registered in server list
but the client keep saying"cannot connect to server" and a ping isnt also shown :S i dont know what i can do else tried several reboots pinged pc and vm all is working but the client dont want to connect:(

i just started the minimal version and my system should also be good enough (quadcore 4gb ram win7)

This is actually a very good serverpack and i'll try to get a mirror up tomorrow since megaupload is no more...

Waiting for new mirror....

I cant download it...
Any One Can Re Upload The File...:*:
or pm me the new link for download it...:ehh:

We should prolly just close this lol

Agreed

:closed_2: