- Joined
- Jan 6, 2010
- Messages
- 744
- Reaction score
- 1,051
WARNING:
This guide will modify the elementclient.exe directly, there has been no verification by disassembling/debugging/... that the changed values are independend, so they may influence other calculations which may lead to inconsistence!
Patch the file at your own risk!
GUIDE:
PATCHED FILE:
This guide will modify the elementclient.exe directly, there has been no verification by disassembling/debugging/... that the changed values are independend, so they may influence other calculations which may lead to inconsistence!
Patch the file at your own risk!
GUIDE:
- First let's take a look at the zone structure
You must be registered to see links - the red zones are those that we want to enable
- now lets create an integer representation of these zones where 0=disabled and 1=enabled
You must be registered to see links - so this is the pattern which we have to find in our elementclient.exe
- open the executable file with your favorite hex-editor
- it is recommend to set the column number to 32, so the visualization is better for editing the world zone array
- search for the pattern around address 0045FCA0
- change the corresponding values from 0 -> 1 for the zones you want to enable
- the following picture shows the hex-editor after enableing all zones for rising tide & genesis
You must be registered to see links
*if you have problems to find the array in your elementclient, try to search for three following float values (512.0, 2048.0, 5632.0), if you found them the zone array is a few lines above...
PATCHED FILE:
- this file was added to the new trunk PWD "Genesis"
-
You must be registered to see links
- base version CN 1.3.6 v101
- removed launcher check
- increased zoom to 20.0 meter
- enabled rising tide + genesis zones
Last edited: