Solution of C9 (AgentServer: Token Timeout)

[Maliq]

Ok i have an idea, join my server here 91.125.207.139 port 15779 and acc asdasd, pass asdasd. Lets see if it really works!


EDIT:
Three words: Does Not Work!

Now cant even join locally!

[Eroticus]

Works on my PC ( Router Cisco !!) !:) Awesome Guide :) !!!


Thanks bro :)

[Maliq]

Works on my PC ( Router Cisco !!) !:) Awesome Guide :) !!!
Thanks bro :)

Ok, here is what i did:
1) changed wip and nip to my global ip in srNodeType.ini
2) changed every ip inside server.cfg to my global ip
3) spoofed all the required files with my local ipv4
4) created a fixed ip as this guide suggested and then turned my global ip into an extra ipv4!
5) executed server files in correct order
6) used edxloader6 to log into server from another computer on the same network in my home

Am i missing something? I noticed a pink message regarding connection closed or something during execution of server files.

ServerCord no found. Session Closed!

1) Port forward
2) use your wan ip in the config files
3) set up the files properly

and that will do it.... i dont understand all these complications...

That will not do it unfortunatelly as the server exes have been altered with asm and spoofed to prevent people from creating online servers with the vsro files, it is really selfish tbh. I recently found out about the real files release and i missed out the clean files and now i am using files which have been customised to not work in creating online servers! I just hope somebody releases the clean files. People need to stop acting like epvp wannabies.

[Eroticus]

Ok, here is what i did:
1) changed wip and nip to my global ip in srNodeType.ini
2) changed every ip inside server.cfg to my global ip
3) spoofed all the required files with my local ipv4
4) created a fixed ip as this guide suggested and then turned my global ip into an extra ipv4!
5) executed server files in correct order
6) used edxloader6 to log into server from another computer on the same network in my home

Am i missing something? I noticed a pink message regarding connection closed or something during execution of server files.






That will not do it unfortunatelly as the server exes have been altered with asm and spoofed to prevent people from creating online servers with the vsro files, it is really selfish tbh. I recently found out about the real files release and i missed out the clean files and now i am using files which have been customised to not work in creating online servers! I just hope somebody releases the clean files. People need to stop acting like epvp wannabies.

Then change to your NET IP !!! :) Every where :)
Server.cfg
CERT(srNodeType.ini)
SMC (smc_updater.cfg / ServiceManager.cfg)
AgentServer.exe / MachineManager.exe (With srPatcher_1.0.6.exe) !!!!

Thats all :)

[Maliq]

Thanks, i do remember trying this previously and getting pink fatal msg in one of the vsro exe files but i will try it once more. If for some reason it works this time then i will be in trouble because my ip is dynamic! All hope is not lost though as i have DMZ to try next!

Nope does not work, i dont really know why i tried it in the first place! from the same network, on another computer i cannot join through the global ip. Here is what i got. Try joining now and i will let server on and see if others can actually join to it.

if you do that to your ip you are basically defining another local ip so I dont expect it to work really, but i do welcome anyone to try join my server, the ip is on the picture below and vsro client needed is v188!

[Eroticus]

Thanks, i do remember trying this previously and getting pink fatal msg in one of the vsro exe files but i will try it once more. If for some reason it works this time then i will be in trouble because my ip is dynamic! All hope is not lost though as i have DMZ to try next!

Nope does not work, i dont really know why i tried it in the first place! from the same network, on another computer i cannot join through the global ip. Here is what i got. Try joining now and i will let server on and see if others can actually join to it.

if you do that to your ip you are basically defining another local ip so I dont expect it to work really, but i do welcome anyone to try join my server, the ip is on the picture below and vsro client needed is v188!

First install xamp or appserv :) and check if another people can join to ur web :)
and enable DMZ !!!

[Maliq]

First install xamp or appserv :) and check if another people can join to ur web :)
and enable DMZ !!!

I opened port 21 & 14147 for filezilla, 8080 for http billing, and turned off windows firewall; now i get disconnected from server window but i will try with the no xtrap agent and see if that works...

My wip and nip are set to local ip so i will change them to global using the trick in this guide and report back.
~ checked and did not work again with the AgentServer_no_xtrap! Something is not right with the AgentServer_no_xtrap exe...

Ports to filezilla seem to work over global ip so i know it is not the ports. The AgentServer_no_xtrap seems to always give (c9) when joining from global ip; with the original AgentServer i get the "disconnected from server" message when i try to log in.


Thanks for your help, it is working fine now! i got it working with DMZ. The problem was windows firewall, that's why it didn't work on my first try! Also router needed a restart after i enabled DMZ. It works like a charm now! no need to spoof or use any ipv4 tricks included on this guide!! I will make a tutorial so all noobs can benefit from this... Let me know if anyone want's me to make a tutorial on how create a server that your friends con connect to via internet and not hamachi!

[gengkey01]

Thanks for your help, it is working fine now! i got it working with DMZ. The problem was windows firewall, that's why it didn't work on my first try! Also router needed a restart after i enabled DMZ. It works like a charm now! no need to spoof or use any ipv4 tricks included on this guide!! I will make a tutorial so all noobs can benefit from this... Let me know if anyone want's me to make a tutorial on how create a server that your friends con connect to via internet and not hamachi![/QUOTE]

Yes i would like to see what u doing to make it right...im using dynamic ip and behind router,cant do anything for now..

[Maliq]

Thanks for your help, it is working fine now! i got it working with DMZ. The problem was windows firewall, that's why it didn't work on my first try! Also router needed a restart after i enabled DMZ. It works like a charm now! no need to spoof or use any ipv4 tricks included on this guide!! I will make a tutorial so all noobs can benefit from this... Let me know if anyone want's me to make a tutorial on how create a server that your friends con connect to via internet and not hamachi!

Yes i would like to see what u doing to make it right...im using dynamic ip and behind router,cant do anything for now..[/QUOTE]

ok ill make one as soon as i get some free time.

[PX2000]

Better not to forward GlobalManager and billing port for more security...

[blacktronix]

my problem is that my friend can login to my server but me not -.-
how i can fix it ?

[kankorezis]

getting this
cannot certify server body : [GatewayServer][my ip]

[arracho]

I got a problem, when i compile the certification with my wan ip i get an exception.


I can't open the compiled certification with my wan ip. any idea?

[uTorrent]

Hello, when i put WAN IP in

srNodeType.ini

and compile after open, i receive

CustomCertificationServer has stopped working

[Mohamed T0P]

Same Problem all player out in my network have C9 in My Network Open No Problem And when chick my Ports At Can You see me I Found all port in my Server.cfg Work and Give me Success