[FULL SETUP GUIDE] Ketchup VS2019 files

Page 3 of 5 FirstFirst 12345 LastLast
Results 31 to 45 of 61
  1. #31
    Registered Iditarod0108 is offline
    MemberRank
    May 2021 Join Date
    6Posts

    Re: [FULL SETUP GUIDE] Ketchup VS2019 files

    The Salt for This Tutorial is Sunkist right??

  2. #32
    ‎‎‎‎ Ketchup is offline
    ModeratorRank
    Jan 2009 Join Date
    LocalhostLocation
    1,899Posts

    Re: [FULL SETUP GUIDE] Ketchup VS2019 files

    Quote Originally Posted by Iditarod0108 View Post
    The Salt for This Tutorial is Sunkist right??
    The boot string is sunkist and the password salt is kikugalanet.
    Forum Contact: Click Here | Community Rules & Guidelines: Click Here

  3. #33
    Registered Iditarod0108 is offline
    MemberRank
    May 2021 Join Date
    6Posts

    Re: [FULL SETUP GUIDE] Ketchup VS2019 files

    Thank you Very Much Mr. Ketchup Appreciate all your work.

    - - - Updated - - -

    One Last Question if you don't mind,


    I noticed that the Arrow that guide you to quests does not work, some of my friends are new to this game and this will be a big help for them. any Idea how to fix this one? I know this is asking a lot but, could you help out a newbie? I'm not taking profit because of this, it's just a way for me and the pals to play privately and relieve stress from work, we are a total of 12 players in my newly opened server..

  4. #34
    Member Percuflex is offline
    MemberRank
    Jan 2020 Join Date
    IsraelLocation
    81Posts

    Re: [FULL SETUP GUIDE] Ketchup VS2019 files

    Quote Originally Posted by Iditarod0108 View Post
    Thank you Very Much Mr. Ketchup Appreciate all your work.

    - - - Updated - - -

    One Last Question if you don't mind,


    I noticed that the Arrow that guide you to quests does not work, some of my friends are new to this game and this will be a big help for them. any Idea how to fix this one? I know this is asking a lot but, could you help out a newbie? I'm not taking profit because of this, it's just a way for me and the pals to play privately and relieve stress from work, we are a total of 12 players in my newly opened server..
    This is a common problem you will find in every flyff sources around the internet. At this moment there is no public fix for it So either you find a way to fix it or you just ignore it.
    Not a dev but always trying to help

  5. #35
    Registered jsonic is offline
    MemberRank
    May 2021 Join Date
    11Posts

    thumbs up Re: [FULL SETUP GUIDE] Ketchup VS2019 files

    Quote Originally Posted by Groxy101 View Post
    This full setup guide is made for the VS2019 files from Ketchup (both K15/K18 will work).

    [VS19] V15 - Tested & Fully Working. - RaGEZONE - MMO development community
    [VS19] V18 Files (Retail Content & V19 Formats) - RaGEZONE - MMO development community

    Installing on Windows 10 (will also work on server 2016/2019)

    This guide has too many images, please download them HERE - updated 12-2-2020
    (they have corresponding names)
    Pass: RageZone


    Guide:

    1. Install Visual Studio 2019 Community

    Spoiler:


    Downloads:
    1.1 Download the VS2019 Community and DirectX 9 files

    1.2 Install DirectX 9

    Spoiler:

    1.2.1 Right click the "dxwebsetup.exe" file and "Run as administrator"
    1.2.2 Click "I accept the agreement" and click "Next"
    1.2.3 Uncheck "Install the Bing bar" and click "Next"
    1.2.4 Click "Next"
    1.2.5 Wait untill download & install is finished
    1.2.6 click "Finish"


    1.3 Install Visual Studio 2019 Community

    Spoiler:

    1.3.1 Right click the "vs_community_*.exe" file and "Run as administrator"
    1.3.2 Click "Continue"
    1.3.3 Wait untill download & install is finished
    1.3.4 Select ".NET desktop development" & "Desktop development with C++" and
    CHECK "C++ MFC for latest v142 build tools (x86 & x64)"
    UNCHECK "Test Adapter for Boost.Text", "Test Adapter for Google Test", "Live Share"
    Check the image below to check if you selected everything!!!
    Click "Install"
    1.3.5 Uncheck "Start after installation" and wait untill download & install is finished
    1.3.6 When you see the "Installation succeeded!" window, you can close it (Don't start Visual Studio!)




    2. Install/Configure SQL Server 2019 & Management

    Spoiler:


    Downloads:
    2.1 Download the Server 2019 Express, Management Studio & Native Client 11 files

    2.1.1 Select the "ENU\x64\msodbcsql.msi" file (Native Client 11)

    2.2 Install SQL Native Client 11

    Spoiler:

    2.2.1 Right click the "msodbcsql.msi" file and "Install"
    2.2.2 Click "Next"
    2.2.3 Click "I accept the terms in the license agreement" and click "Next"
    2.2.4 At "ODBC Driver for SQL Server SDK" click the dropdown icon and select "Will be installed on local hard drive" and click "Next"
    2.2.5 Click "Install"
    2.2.6 Click "Finish"
    2.2.7 Restart your computer


    2.3 Install Server 2019 Express

    Spoiler:

    2.3.1 Right click the "SQL2019-SSEI-Expr.exe" file and "Run as administrator"
    2.3.2 Select the "Custom" installation
    2.3.3 Click "Install"
    2.3.4 Wait untill download & install is finished
    2.3.5 Click "New SQL Server stand-alone installation or add features to an existing installation"
    2.3.6 Check "I accept the license terms and Privacy Statement" and click "Next"
    2.3.7 Click "Next"
    2.3.8 Wait untill all tasks are completed
    2.3.9 Ignore the "Windows Firewall" warning for now and click "Next" (disabling your Firewall is NOT RECOMMENDED!)
    2.3.10 Leave the default "Instance Features" and click "Next"
    2.3.11 Leave the default "Named instance" as "SQLExpress" and click "Next"
    2.3.12 Click "Next"
    2.3.13 Click "Next"
    2.3.14 Select "Mixed Mode" and type a secure password (write this password down) + confirm and click "Next" (don't delete the "Specify SQL Server Administrators", I have mine removed from the screenshot only!)
    2.3.15 Click "Accept" and click "Next"
    2.3.16 Click "Accept" and click "Next"
    2.3.17 Wait untill the installation is finished
    2.3.18 Click "Close" after checking every status is "Succeeded" (details showing: Install successful)


    2.4 Install Server Management Studio

    Spoiler:

    2.4.1 Right click the "SSMS-Setup-ENU.exe" file and "Run as administrator"
    2.4.2 Click "Install"
    2.4.3 Wait untill download & install is finished
    2.4.4 When finished, click "Close"


    2.5 Configure SQL server

    Spoiler:

    2.5.1 Open "Microsoft SQL Server Management Studio 18"
    2.5.2 Select Authentication: "SQL Server Authentication", Login: "sa", Password: "The secure password you wrote down", check "Remember password" and click "Connect"

    2.5.3 Top left, click "File", click "Open", click "File.." (CTRL+O)
    2.5.4 Go to the Ketchup database folder (K18\Database) and select "- Edit Me Before Executing.sql" click "Open"
    2.5.5 Change "DESKTOP-SH6G9M7" to your own computer name (Right click Windows button, System, Device name)
    2.5.6 Click "Execute"

    2.5.7 Top left, click "File", click "Open", click "File.." (CTRL+O)
    2.5.8 Go to the Ketchup database folder (K18\Database) and select "1. Database.sql" click "Open"
    2.5.9 Click "Execute"

    2.5.10 Top left, click "File", click "Open", click "File.." (CTRL+O)
    2.5.11 Go to the Ketchup database folder (K18\Database) and select "2. Deadlock.sql", click "Open"
    2.5.12 Click "Execute"

    2.5.13 Top left, click "File", click "Open", click "File.." (CTRL+O)
    2.5.14 Go to the Ketchup database folder (K18\Database) and select "3. Account.sql", click "Open"
    2.5.15 Click "Execute"

    2.5.16 Top left, click "File", click "Open", click "File.." (CTRL+O)
    2.5.17 Go to the Ketchup database folder (K18\Database) and select "4. Ranking.sql", click "Open"
    2.5.18 Click "Execute"

    2.5.19 Close "Microsoft SQL Server Management Studio 18" (Click NO, for not saving the .sql files)

    2.5.20 Open "ODBC Data Sources (32-bit)" as Administrator

    2.5.21 Click "Add"
    2.5.22 Scroll all the way down, select "SQL Server Native Client 11.0" and click "Finish"
    2.5.23 Name: character01 / Server: YOURCOMPUTERNAME\SQLEXPRESS click "Next"
    2.5.24 Select "With Integrated Windows authentication" and click "Next"
    2.5.25 Check "Change the default database to:" select "CHARACTER_01_DBF" and click "Next"
    2.5.26 Click "Finish"
    2.5.27 Click "Test Data Source"
    2.5.28 It has to say "TESTS COMPLETED SUCCESSFULLY!" and click "OK"
    2.5.29 Click "OK"

    2.5.30 Click "Add"
    2.5.31 Scroll all the way down, select "SQL Server Native Client 11.0" and click "Finish"
    2.5.32 Name: log01 / Server: YOURCOMPUTERNAME\SQLEXPRESS click "Next"
    2.5.33 Select "With Integrated Windows authentication" and click "Next"
    2.5.34 Check "Change the default database to:" select "LOGGING_01_DBF" and click "Next"
    2.5.35 Click "Finish"
    2.5.36 Click "Test Data Source"
    2.5.37 It has to say "TESTS COMPLETED SUCCESSFULLY!" and click "OK"
    2.5.38 Click "OK"

    2.5.39 Click "Add"
    2.5.40 Scroll all the way down, select "SQL Server Native Client 11.0" and click "Finish"
    2.5.41 Name: login / Server: YOURCOMPUTERNAME\SQLEXPRESS click "Next"
    2.5.42 Select "With Integrated Windows authentication" and click "Next"
    2.5.43 Check "Change the default database to:" select "ACCOUNT_DBF" and click "Next"
    2.5.44 Click "Finish"
    2.5.45 Click "Test Data Source"
    2.5.46 It has to say "TESTS COMPLETED SUCCESSFULLY!" and click "OK"
    2.5.47 Click "OK"

    2.5.48 Click "Add"
    2.5.49 Scroll all the way down, select "SQL Server Native Client 11.0" and click "Finish"
    2.5.50 Name: ranking / Server: YOURCOMPUTERNAME\SQLEXPRESS click "Next"
    2.5.51 Select "With Integrated Windows authentication" and click "Next"
    2.5.52 Check "Change the default database to:" select "RANKING_DBF" and click "Next"
    2.5.53 Click "Finish"
    2.5.54 Click "Test Data Source"
    2.5.55 It has to say "TESTS COMPLETED SUCCESSFULLY!" and click "OK"
    2.5.56 Click "OK"

    2.5.57 Close the ODBC window (click "OK")




    3. How to open source files

    Spoiler:


    3.1 Opening .sln file for the first time

    Spoiler:

    3.1.1 Go to the Ketchup Source "All" folder (K18\Source\Source\All) and open "all.sln"
    3.1.2 In the "How do you want to open this file?" select "Visual Studio 2019", check "Always use this app to open .sln files" and click "OK"
    3.1.3 Make sure to Create an Account and sign in to Visual Studio
    3.1.4 Select your "color theme" (I always set it to "Dark" mode) and click "Start Visual Studio"
    3.1.5 Wait until Visual Studio is done preparing for first use
    3.1.6 When Visual Studio is done preparing it should open the source (check right side, AccountServer, CacheServer, etc)




    4. How to compile source

    Spoiler:


    4.1 Compile source all at once

    Spoiler:

    4.1.1 Follow the 3.1 steps and open your source in Visual Studio
    4.1.2 Right click "Solution 'all' (8 of 8 projects)" and select "Batch Build.."
    4.1.3 Click "Rebuild" and wait until the build is done
    4.1.4 Check if "Rebuild All: 8 succeeded" (NOTE: The clean source will always compile "8 succeeded")
    4.1.5 Don't forget to run the "-Move Compiles.bat" file (in the K18 root folder)


    4.2 Compile source separate

    Spoiler:

    4.2.1 Follow the 3.1 steps and open your source in Visual Studio
    4.2.2 Right click a specific server (or Neuz) and click "Rebuild"
    4.2.3 Wait until the rebuild is done (shouldn't take long because it's only building 1 .exe file)
    4.2.4 Check if "Rebuild All: 1 succeeded"
    4.2.5 Don't forget to run the "-Move Compiles.bat" file (in the K18 root folder)





    5. How to setup your server (Resource + Source)

    Spoiler:


    5.1 Configure resource .ini files

    Spoiler:

    5.1.1 Open your Program folder (K18\Server\Program)
    5.1.2 Open the "AccountServer.ini" file
    5.1.3 Change "PASS" to your own SQL password (DB_PWD_LOGIN/DB_PWD_LOG)
    5.1.4 Save the file
    5.1.5 Open the "Certifier.ini" file
    5.1.6 Change "PASS" to your own SQL password
    5.1.7 Save the file
    5.1.8 Open your Script folder (K18\Server\Script)
    5.1.9 Open the "DatabaseServer.ini" file
    5.1.10 Change "PASS" to your own SQL password (DB_PWD_CHARACTER/DB_PWD_LOG)
    5.1.11 Save the file


    5.2 Use merger program

    Spoiler:

    5.2.1 Open your Resource folder (K18\Server\Resource)
    5.2.2 Run the "- Merge.exe" program
    5.2.3 Open your ResClient folder (K18\Server\ResClient)
    5.2.4 Copy all files (data.res, dataSub1.res, dataSub2.res, Flyff.a)
    5.2.5 Open your Client folder (K18\Client)
    5.2.6 Paste the files (3x .res file + Flyff.a) into the client folder (Replace the files in the destination)

    This merge has to be done every time you change something in the RESOURCE folder!



    5.3 Starting your server

    Spoiler:

    5.3.1 Open your Program folder (K18\Server\Program)
    5.3.2 Right click "1. Account.exe" and click "Run as Administrator"
    5.3.3 Check also "Private Networks, such as my home.." and click "Allow access"
    5.3.4 The Account server is now running

    5.3.5 Right click "2. Certifier.exe" and click "Run as Administrator"
    5.3.6 Check also "Private Networks, such as my home.." and click "Allow access"
    5.3.7 The Certifier server is now running

    5.3.8 Open your Resource folder (K18\Server\Resource)
    5.3.9 Right click "3. Database.exe" and click "Run as Administrator"
    5.3.10 Check also "Private Networks, such as my home.." and click "Allow access"
    5.3.11 The Database server is now running

    5.3.12 Open your Program folder (K18\Server\Program)
    5.3.13 Right click "4. Core.exe" and click "Run as Administrator"
    5.3.14 Check also "Private Networks, such as my home.." and click "Allow access"
    5.3.15 The Core server is now running

    5.3.16 Right click "5. Login.exe" and click "Run as Administrator"
    5.3.17 Check also "Private Networks, such as my home.." and click "Allow access"
    5.3.18 The Login server is now running

    5.3.19 Right click "6. Cache.exe" and click "Run as Administrator"
    5.3.20 Check also "Private Networks, such as my home.." and click "Allow access"
    5.3.21 The Cache server is now running

    5.3.22 Open your Resource folder (K18\Server\Resource)
    5.3.23 Right click "7. World.exe" and click "Run as Administrator"
    5.3.24 Check also "Private Networks, such as my home.." and click "Allow access"
    5.3.25 Leave the World Server on "Not responding"
    5.3.26 After about 30 seconds (depending on your computer) the World server is running

    5.3.27 Open your Client folder (K18\Client) and run "- Start Game.bat"
    5.3.28 Your Neuz will now load - login with Account: test / Password: test
    5.3.29 Make a new character
    5.3.30 Login, have fun playing!




    6. Change Visual Studio settings for debugging Neuz

    Spoiler:

    6.1 Open Visual Studio 2019 and select the "all.sln" file
    6.2 Right click your "Neuz" solution and click "Properties"
    6.3 On the left side, go to the "Debugging" tab
    6.4 Change "Command Arguments" to "sunkist" / "Working Directory" to your "K18\Client" folder / "Debugger Type" to "Native Only" and click "Apply"


    7. How to debug server files (new instance or attach debug)

    Spoiler:


    7.1 Running a new instance (start a new debug from Visual Studio)

    Spoiler:

    World Server debug example

    7.1.1 Run all your server .exe files except for the Worldserver (don't start the Worldserver)
    7.1.2 Open your Server folder (K18\Server)
    7.1.3 Copy your "Script" folder
    7.1.4 Open your Source folder (K18\Source\Source)
    7.1.5 Paste your "Script folder" into the Source folder (Source\Source)
    7.1.6 Open the Script folder (K18\Source\Source\Script)
    7.1.7 Open the "WorldServer.ini" file
    7.1.8 Change the "ResourceFolder" to your Resource path (C:\Users\*\Desktop\K18\Server\Resource)
    7.1.9 Open Visual Studio 2019 and select the "all.sln" file
    7.1.10 Right click "WorldServer" solution and select "Debug", "Start New Instance"
    7.1.11 Your WorldServer will now start in debug mode. If it crashes, you will get a debug log


    7.2 Running an attached debug (debug an already running proces)

    Spoiler:

    World Server debug example

    7.2.1 Run all your server files (also WorldServer)
    7.2.2 Open Visual Studio 2019 and select the "all.sln" file
    7.2.3 At the top, go to "Debug" and select "Attach to Process.."
    7.2.4 Select the "7. World.exe" process and click "Attach"
    7.2.5 Select "Restart under different credentials" (Visual Studio will restart)
    7.2.6 At the top, go to "Debug" and select "Attach to Process.."
    7.2.7 Select the "7. World.exe" process and click "Attach"
    7.2.8 Visual Studio is now debugging the running WorldServer process




    8. How to make your server public (and change default ports)

    Spoiler:


    8.1 General

    Spoiler:


    8.1.1 Find out what your WAN-IP is
    8.1.2 Write down your WAN-IP (ipv4)



    8.2 Resource

    Spoiler:


    8.2.1 Open your Resource folder (K18\Server\Program)
    8.2.2 Open the "AccountServer.ini" file
    8.2.3 Change BOTH "127.0.0.1" to your "WAN-IP" and save the file
    8.2.4 Open the "CacheServer.ini" file
    8.2.5 Change the default Cache port "5400" to something else (between 1024 to 49151) - DON'T CHANGE THE 127.0.0.1
    8.2.6 Write down the new Cache port and save the file
    8.2.7 Open the "Loginserver.ini" file
    8.2.8 Change the "AddCache(127.0.0.1);" to your "WAN-IP" and save the file - DON'T CHANGE THE OTHER 127.0.0.1



    8.3 Source

    Spoiler:


    8.3.1 Go to the Ketchup Source "All" folder (K18\Source\Source\All) and open "all.sln"
    8.3.2 Open the file "kCommon.h" in the Solution Items tab
    8.3.3 Scroll down and change NEUZ_IPSET "127.0.0.1" to your "WAN-IP" (you could also change it to your domain name)
    8.3.4 Also change the NEUZ_CPORT "5400" to the port you have set in step 8.2.5
    8.3.5 Press CTRL + SHIFT + F and search for "23000" (Find All)
    8.3.6 There is only one search result, double click that one
    8.3.7 Change the "PN_CERTIFIER 23000" to something else (between 1024 to 49151) - NOT THE SAME AS THE CACHE PORT AND TRY TO NOT HAVE THE SAME IN THE PORT LIST (msghdr.h)
    8.3.8 Write down the port you just changed (This is the Certifier server port)
    8.3.9 On line 1456 (in the same area) you will find "PN_LOGINSRVR 28000"
    8.3.10 Change this port (28000) to something else (between 1024 to 49151) - NOT THE SAME AS THE CACHE PORT AND TRY TO NOT HAVE THE SAME IN THE PORT LIST (msghdr.h)
    8.3.11 Write down the port you just changed (This is the Login server port)
    8.3.12 Save the "msghdr.h" and "kCommon.h" file
    8.3.13 Use step 4 to compile the source and copy the .exe files to the right folders



    8.4 Firewall

    Spoiler:


    8.4.1 Open "Windows Defender Firewall with Advanced Security"
    8.4.2 Go to "Inbound Rules" and click "New Rule.." on the right side
    8.4.3 Select "Port" and click "Next"
    8.4.4 In "Specific local ports:" add the three ports you wrote down (Cache, Cert, Login) and click "Next"
    8.4.5 Click "Next" again
    8.4.6 Click "Next" again
    8.4.7 Give it a name and click "Finish"



    8.5 Portforward

    Spoiler:


    NOTE: If you are using a VPS, this step is not needed (you only have to open the ports in the VPS firewall)

    8.5.1 Open the Windows 10 "Command Prompt" window
    8.5.2 Type: ipconfig
    8.5.3 Write down the "Default Gateway" IP-address
    8.5.4 Open your browser and go this Default Gateway IP-address (your Router)
    8.5.5 Log into your router (most of the time it's: admin/admin, but check your router, and change the admin/admin login... security risk..)
    8.5.6 Go to the Forwarding menu in your router (mine is a TP-Link, yours might be a different one)
    8.5.7 Click on "Add New..."
    8.5.8 Add your CHANGED ports to the new entry (the service/internal ports have to be the same) - YOU NEED TO MAKE A NEW ENTRY FOR EVERY PORT!
    8.5.9 IP-address = the computer your hosting it on (check Command Prompt: ipconfig)
    8.5.10 Protocol = TCP
    8.5.11 Click save (Don't forget to add all the ports) - CACHE/CERT/LOGIN



    8.6 Run the server

    Spoiler:


    8.6.1 Run your .exe files as shown in step 5.3
    8.6.2 Upload your CLIENT folder and give it to friends





    QUESTIONS?
    As you can see I used specific numbers for the Guide steps.
    If you have any questions, please use those specific numbers in your post!
    Hi, Newbie here.
    I have directX12. Do I still need the directX9 for it to work?

    - - - Updated - - -

    I have downloaded everything and follow all steps.
    Everything is working fine. thank you!

    - - - Updated - - -

    I have downloaded everything and follow all steps.
    Everything is working fine. thank you!

    - - - Updated - - -

    Hi, I'm back with a newb question xD

    I've been trying to look for the answer of this 'cause it's so shameful for asking a lot of questions from you guys. I know that Y'all are busy but I just can't find the solution :-(

    How can I change the Neuz title or the server name or even put a logo if it's not too much to ask? I found something like
    #define NEUZ_TITLE "ketchup v15 vs19" in kCommon.h and changed the name inside the quote and quote into something then saved it but nothing has changed. also tried doing a full rebuild on all.sln but still nothing has changed xD. I know this is a no brainer for some but I really have a hard time here. anyone's help is much appreciated.

  6. #36
    Member Percuflex is offline
    MemberRank
    Jan 2020 Join Date
    IsraelLocation
    81Posts

    Re: [FULL SETUP GUIDE] Ketchup VS2019 files

    Quote Originally Posted by jsonic View Post
    Hi, Newbie here.
    I have directX12. Do I still need the directX9 for it to work?

    - - - Updated - - -

    I have downloaded everything and follow all steps.
    Everything is working fine. thank you!

    - - - Updated - - -

    I have downloaded everything and follow all steps.
    Everything is working fine. thank you!

    - - - Updated - - -

    Hi, I'm back with a newb question xD

    I've been trying to look for the answer of this 'cause it's so shameful for asking a lot of questions from you guys. I know that Y'all are busy but I just can't find the solution :-(

    How can I change the Neuz title or the server name or even put a logo if it's not too much to ask? I found something like
    #define NEUZ_TITLE "ketchup v15 vs19" in kCommon.h and changed the name inside the quote and quote into something then saved it but nothing has changed. also tried doing a full rebuild on all.sln but still nothing has changed xD. I know this is a no brainer for some but I really have a hard time here. anyone's help is much appreciated.
    Neuz title is set inside the "kCommon.h"
    Code:
    #define NEUZ_TITLE	"TEXT HERE"
    You have recompile to make the changes inside the game. Plus this is a guide section if you have any question you can ask here: https://forum.ragezone.com/f483/
    Not a dev but always trying to help

  7. #37
    Registered jsonic is offline
    MemberRank
    May 2021 Join Date
    11Posts

    Re: [FULL SETUP GUIDE] Ketchup VS2019 files

    Quote Originally Posted by Percuflex View Post
    Neuz title is set inside the "kCommon.h"
    Code:
    #define NEUZ_TITLE    "TEXT HERE"
    You have recompile to make the changes inside the game. Plus this is a guide section if you have any question you can ask here: https://forum.ragezone.com/f483/
    Ohh, ok. thanks! will post a new thread next time :-)

    I've successfully changed the neuz title. thanks mucho :-)

  8. #38
    Newbie ryannsuba is offline
    MemberRank
    Mar 2017 Join Date
    2Posts

    ! Re: [FULL SETUP GUIDE] Ketchup VS2019 files

    A:\DOWNLOAD FILES\K18\K18\Source\Source\_database\DbManager.cpp, 2247 LogDB Connect

    anyone can help me ?

    when i open 3. Database.exe always

  9. #39
    Newbie ryannsuba is offline
    MemberRank
    Mar 2017 Join Date
    2Posts

    Re: [FULL SETUP GUIDE] Ketchup VS2019 files

    i fix this problem :)
    everything is working from 1. account.exe to 7.world.exe no errors
    but i have 1 last problem im stock at select channel , i click create character then im stock there then i restart my client then im stock now in select channel.

    update : when i create character (Name Already In Use )
    what should i do
    Last edited by ryannsuba; 25-06-21 at 06:46 AM.

  10. #40
    Newbie alterans is offline
    MemberRank
    Sep 2021 Join Date
    4Posts

    Re: [FULL SETUP GUIDE] Ketchup VS2019 files

    Hi, i'm trying to run the server, without any kind of modifications.
    AccountServer and Certifier are running fine, but i cant run the DatabaseServer
    When i try to start it, it not start, and no error...
    Can somebody help me please?

  11. #41
    Registered Ryzelle01 is offline
    MemberRank
    Sep 2021 Join Date
    16Posts

    Re: [FULL SETUP GUIDE] Ketchup VS2019 files

    kCommon.h is same with ServerCommon.h?

  12. #42
    ‎‎‎‎ Ketchup is offline
    ModeratorRank
    Jan 2009 Join Date
    LocalhostLocation
    1,899Posts

    Re: [FULL SETUP GUIDE] Ketchup VS2019 files

    Quote Originally Posted by Ryzelle01 View Post
    kCommon.h is same with ServerCommon.h?
    It can be but this guide is for these files:
    https://forum.ragezone.com/f457/vs19...d-amp-1170442/
    https://forum.ragezone.com/f457/vs19...ntent-1174203/
    Forum Contact: Click Here | Community Rules & Guidelines: Click Here

  13. #43
    Ragezone Advisor Men In White is offline
    True MemberRank
    Feb 2011 Join Date
    C:/Windows/Location
    459Posts

    Re: [FULL SETUP GUIDE] Ketchup VS2019 files

    C1083 Cannot open include file: 'afxwin.h': No such file or directory WorldServer C:\Users\AMOS PC\Downloads\K18\Source\Source\WorldServer\stdafx.h 27
    HATERS = IGNORE!
    Do not get buthurt folks. nobody owns files Around here.Even if you made some modifications the files/Source is still not ours. So Don't Act like you own them or get mad just because someone share it. I'ts that simple.
    Just leave a private message. I'll gonna message you back as soon as i can.

  14. #44
    ‎‎‎‎ Ketchup is offline
    ModeratorRank
    Jan 2009 Join Date
    LocalhostLocation
    1,899Posts

    Re: [FULL SETUP GUIDE] Ketchup VS2019 files

    Quote Originally Posted by Men In White View Post
    C1083 Cannot open include file: 'afxwin.h': No such file or directory WorldServer C:\Users\AMOS PC\Downloads\K18\Source\Source\WorldServer\stdafx.h 27
    https://forum.ragezone.com/f724/setu...2/#post9071202
    Forum Contact: Click Here | Community Rules & Guidelines: Click Here

  15. #45
    Registered Ryzelle01 is offline
    MemberRank
    Sep 2021 Join Date
    16Posts

    Re: [FULL SETUP GUIDE] Ketchup VS2019 files

    i made it run smooth then i tried to make it in Hamachi and go online, i put my hamachi ip in account, cache server and loginserver.ini, compiled source again with same port with cache and hamachi ip. the problemis i cannot connect ingame using my local pc

    Last edited by Ryzelle01; 3 Weeks Ago at 01:53 PM. Reason: add picture



Page 3 of 5 FirstFirst 12345 LastLast

Advertisement