ok I'm still trying to figure out why the server bogs down when I get over 11GB of RAM usage. It's not using Swap at all, and there's plenty of overhead for the system with 5GB free, so I'm completely baffled about it. I'm going to hack at that and play around with automatic patching for a bit.
@SylenThunder
Are you using your pwserver under a vbox or vmware?
I believe he is using a physical server that 343 helped him purchase.
Yep, running a SunFire V20z with 16GB RAM and two 70-ishGB hard drives in RAID2.
It's pretty basic. All that's on it is 10.04 and the 343/PsyTrac release.
are you using x64 or x86?
x64, it's what I've always used on 343's 1.3.6 release.
The only thing that's raised question in my mind is when you said that you're "not using any swap" oO ?!? Did you mean that the swap that has been 'set up' isn't really being utilized, or did you mean you do not have any swap allocated? If you do not have any space allocated to swap; that could be as bad and worse than setting up too much... If this is the case I recommend setting up a 1:1 ratio (so, since you have 16GB of physical ram, setting up a 16GB swap)... Trust that, just because you have a machine with 2 TB of physical ram (lets say you had one) would not mean "oh, since I have incredibly so much ram, I do not need swap any longer" ~ you would need 2 TB of swap space
I mean that the default 2GB swap that was set up by default with the install is at a usage of 0.
For the memory info here is what it reads....
Swap: 2850808k total, 0k used, 2850808k free, 812552k cached
I've never seen those number values change (except maybe cached, I haven't really paid attention to it)
You are certainly going to want to change that 2GB => 16GB
That'll be step numberae' one...
Ok will give it a shot. I didn't figure it mattered since, from all outward appearances, it wasn't using the swap at all.
Edit: ok, created a 16GB swap file, so now it looks like this....
That's immediately after a reboot.Code:root@ubuntu:~# free -m total used free shared buffers cached Mem: 16020 396 15624 0 11 45 -/+ buffers/cache: 339 15680 Swap: 19167 0 19167
Last edited by SylenThunder; 07-07-12 at 04:03 PM.
well.. 10 would be a decent size really. I use 70% ram swap fileOriginally Posted by 343
You are certainly going to want to change that 2GB => 16GB
That'll be step numberae' one...
I have a problem with the database on pwAdmin. I had it working on 1.3.6 before and could load addons fine etc. I copied the 1.4.4 files over and ran the server then ran the start_min.sh. Now things like GM Control etc say "Connection to MySQL Database Failed" and on Characters "Importing Roles to MySQL Failed" when I sync database etc. Any ideas. I can run the client and play 1.4.4 with gm status but I am having problems with these things and more obviously due to some kind of database problem. I can create accounts using pwAdmin as well.
Last edited by David Swan; 08-07-12 at 01:43 PM. Reason: adding information
Hey. Great release~
Edit: all fixed & working perfectly.
Last edited by q12345; 15-07-12 at 06:35 AM. Reason: iweb error
Re: Psytrac's 1.4.4 release, 343 style
hi sorry to bother you but im getting 2 problems client is playing up on me i keep getting a error saying the procedure entry point ? getname@ElementSkill@GNET@@SABPGI@Z could not be located in the dinamic link libery ElementSkill.dll. and the other problem is i got every thing else on pwAdmin online but i got this Auth Daemon ./authd 0 Offline other wise good work on the base and how you explained how to setup the server good work
o could you also help me i didnt know what you ment about the 777 thing
Reply With Quote
