Tutorial for the PWSERVER1.3.6 + MYSQL by beastie

Now it connects, but disconnects right after an other error...

err : gdelivery::disconnect from GAuth server. Reconnecting....
TRACE : gdeliveryserver::statusannounce,online=0,fakemax=6000,load=0,attr=268435456
TRACE : gdelivery::connect to gauthd successfully.
err : Protocol state or size policy error. sid=47,type=10,size=22,acceptsize=4
err : Protocol state or size policy error. sid=92,type=498872457,size=****acceptsize=21
err : gdelivery::disconnect from GAuth server. Reconnecting....
TRACE : gdelivery::connect to gauthd successfully.
err : Protocol state or size policy error. sid=48,type=10,size=22,acceptsize=4
err : Protocol state or size policy error. sid=94,type=498872457,size=****acceptsize=21
err : gdelivery::disconnect from GAuth server. Reconnecting....
TRACE : gdelivery::connect to gauthd successfully.
err : Protocol state or size policy error. sid=49,type=10,size=22,acceptsize=4
err : Protocol state or size policy error. sid=***type=498872457,size=****acceptsize=21

I used to get that... then I reformated and tried again... now i don't even get that lol.

Edit: And by that I mean Disconnected over and over

So you don't have any solution to this?

TRACE : gdelivery::connect to gauthd successfully.

Best news I've seen all day... however on the next ping it fails... then succeeds... then fails... and so on.

which ports do i have to open?? which ones? just 29000 dont work

I think I found the solution. I need to reboot first though.

---------- Post added at 08:12 PM ---------- Previous post was at 07:16 PM ----------

I'm looking for it. I think it's in the rulesets somewhere -.-

It tells me
err : Protocol state or size policy error. sid=12,type=10,size=22,acceptsize=4

Then right after
err : gdelivery::disconnect from GAuth server. Reconnecting....


I looked into the authd folder and inside classes there's a bunch of things mentioning types and sizes in relation to the protocols folder inside authd. However type "10" has a max size a lot higher then 4 -.-

filedropper link is broken tryed it with 3 different browsers just incase.

file always downloads as 174 byte file

Code:

---

TRACE : gdelivery::gfactionclient: disconnect from server. reconnecting...
root@pwi:~# Terr : gfactionserver:: identical linkserver(or delivery) id(1) find. check .conf file.
err : gfactionserver:: identical linkserver(or delivery) id(3) find. check .conf file.
err : gfactionserver:: identical linkserver(or delivery) id(2) find. check .conf file.
err : gfactionserver:: identical linkserver(or delivery) id(4) find. check .conf file.
TRACE : gdelivery::connect gfactionserver successfully.
TRACE : gdelivery::connect to gauthd successfully.
err : Protocol state or size policy error. sid=927,type=498872457,size=****acceptsize=21
err : gdelivery::disconnect from GAuth server. Reconnecting....
err : gfactionserver:: identical linkserver(or delivery) id(0) find. check .conf file.
TRACE : Receive zoneid=1 from delivery
TRACE : gdelivery::gfactionclient: disconnect from server. reconnecting...

---

still stuck on this

Quote:

---

Originally Posted by Micazz

Code:

---

TRACE : gdelivery::gfactionclient: disconnect from server. reconnecting...
root@pwi:~# Terr : gfactionserver:: identical linkserver(or delivery) id(1) find. check .conf file.
err : gfactionserver:: identical linkserver(or delivery) id(3) find. check .conf file.
err : gfactionserver:: identical linkserver(or delivery) id(2) find. check .conf file.
err : gfactionserver:: identical linkserver(or delivery) id(4) find. check .conf file.
TRACE : gdelivery::connect gfactionserver successfully.
TRACE : gdelivery::connect to gauthd successfully.
err : Protocol state or size policy error. sid=927,type=498872457,size=****acceptsize=21
err : gdelivery::disconnect from GAuth server. Reconnecting....
err : gfactionserver:: identical linkserver(or delivery) id(0) find. check .conf file.
TRACE : Receive zoneid=1 from delivery
TRACE : gdelivery::gfactionclient: disconnect from server. reconnecting...

---

still stuck on this

---

I don't know. I renamed zoneid=1 to 2 for now just to make the gfaction error go away. As for the Gauth error I just mentioned that above. It says a size and then and acceptable size and if you change the config.xml in the authd folder it mentions lines like that referencing the protocols. So I'm going to assume that there's a config.xml folder somewhere and that it is having a protocol size that is larger then what is accepted.

-However. I also did stuff with TCP and I'm going to assume that it may or may not have something to do with it. I may post it later because it might help in making the server more optimal (faster - smoothier) etc

1. download link are not broken! I think maybe your country apply restrictions or something like this. I don't know what exactly.

Hey all guys and ladies! I don't know what did you do with my files but i think you have fucked up the configuration of the server.....

Have you correctly following the readme file? IP and Port in every configuration files doesn't be changed! It's a easy release... with less of changes needed to get it started well!

You just need to do the right permissions for every files and install XAMPP... it's ALL !!! After this:
./start.sh (for a minimal start) or ./full_start.sh (if you want to load every instances....)

hey all is there a way to change max money in inventory and storage?

I don't know. I never work on this part of the game...

Quote:

---

Originally Posted by Romulan

1. download link are not broken! I think maybe your country apply restrictions or something like this. I don't know what exactly.

Hey all guys and ladies! I don't know what did you do with my files but i think you have fucked up the configuration of the server.....

Have you correctly following the readme file? IP and Port in every configuration files doesn't be changed! It's a easy release... with less of changes needed to get it started well!

You just need to do the right permissions for every files and install XAMPP... it's ALL !!! After this:
./start.sh (for a minimal start) or ./full_start.sh (if you want to load every instances....)

---

After studying the files and reading articles and posts from the PW section I think it doesn't apply to jus tyour files. I think it actually applies to the java that is distributed with it. I may give it ONE last try... maybe. I tried it on ubuntu 8.10, 9.04, 9.10. I tried installing CentOS, Debian, and Fedora but I had problem (I'm doing usb installs of all this... which is why). I also tried LXDE PClinuxOS and so on. I'm not trying the best linux disto ever and I still get the same protocol state or size error. So I'm thinking it has to do with the java files that are being distributed cause I've looked all over tcp and in the kernel + tcp files and nothing mentions acceptsize.

(Can I give you a ftp account to upload to my host where I can then download and distribute it? - The second files)

---------- Post added at 11:40 AM ---------- Previous post was at 10:03 AM ----------

I tried with not adding any files and just the PWServer folder and the /etc files. Umm... don't know where else to look.

Maybe it's a java issue but i'm very surprised ... Are you using a 64bits system? ^^

Otherwise... try to download the latest jdk1.6 from the official java sun website and make a fresh install of it on your linux system ...

It should be a simple .bin file you just need to upload it on your /usr/java folder on your linux system set the 755 chmod and start the install...

But i think you have a 64bits system...

Quote:

---

Originally Posted by Romulan

Maybe it's a java issue but i'm very surprised ... Are you using a 64bits system? ^^

Otherwise... try to download the latest jdk1.6 from the official java sun website and make a fresh install of it on your linux system ...

It should be a simple .bin file you just need to upload it on your /usr/java folder on your linux system set the 755 chmod and start the install...

But i think you have a 64bits system...

---

Nope, I have 32-bit. I also tried different fresh installs of java. I have no clear clue. I really want to help develop PW files with you and give updates on releases but I don't understand what the problem is. I'm going to try using PenDriveLinux and maybe even VMWare and perhaps the problem will go away. I see more people succeeding with Virtual installs then actual partitioned installs. I remember some time ago even I was able to connect to beastie's vmware release when it first came out so I'll have to give it another try.

I even extracted beastie's release and still got the same weird problem (however I didn't change java files) so once I get PenDriveLinux I'll check vmware. If vmware works I'll then retry opening beastie's vmware and extract stuff again.

If you're wondering how to do it ask. Basically you turn the vmware harddrive into a .bin (with linux) then you open the .bin with an iso program (with windows). I may just give up though but I feel the knowledge I gained from trying so much might go to waste if I do.

@ Romulan:

- The link is broken (atleast the 2nd link) the first link works correct. But the filedropper link downloads me a 138kb file or something simular of size. And can't open it then offc...

Is there any way you could upload your 2nd version to another upload host?

New link for the second version on adrive.com... maybe it will work better than filedropper.com for all of you.

[ check the first page of this thread for the new link ]

Thank you Romulan, downloading right now. Hopefully this works then to setup a server.

++ YAY for uploading all the stuff to the server over winSCP (takes hours for me ah well, hopefully it works now)

I think I found a way that is better then vmware/colinux/virtualbox. I set it up and it immediately worked over no-ip without a problem. I just need to get those new files and check to see if the client works.

Also, I will mirror those files to a few locations momentarily.

[This is not being posted for the sake of advertising. It's being posted to help make sure the development is working smoothly]

I got it to work. I'm not sure if it lags right now but you can check it out.

http://foreverperfect.no-ip.org/register (For registering)

Edit your server.txt to have

29001:foreverperfect.no-ip.org

-Note: To get it to work I edited a few minor things that was making the server not load -_-. Also, I'm using this release but not on Vmware, Ubuntu or a full install. It's running over a program that uses colinux as well but it forwards ports and so on.

-Note2: In my research I found ways to make the server possibly lag less. I haven't put them in yet but I'll place the links here after I test them later.

Edit: Iweb doesn't even exist when I try to connect to it and BatGM can assign GMs but not gold. So I can't get cubi-gold Q_Q

---------- Post added at 11:28 PM ---------- Previous post was at 09:57 PM ----------

Oh the server has to restart and the cubi adds. Nevermind batgm works however iweb still doesn't =/

I got my server almsot running, only problem left now is:

When i login i get ingame an error: "Unknown Error 255".
Is there anyway to fix this issue?

It couldn't be clientsided error, as i just played on RagingINtheZONE's server to check it out xD

Thanks in advance.

@Micazz

"Unknown Error 255". on server side or client side?

Well the Error should be Serversided.

But I receive the error when logging in at client.

"Unknown Error (255)"

Well my computer decided to auto update and shutoff but it's back up lol. I'll do some more editing today when I get home from school.