please update link. Tool inaccessible.
please update link. Tool inaccessible.
i updated now the OpCodeExtractor...
Reads the TERA Process > Directory > Release File...
Writes some info down to Config File...
The OpCodeDLL reads everythging needed from the Config File and starts Injection
Everything comes out in the Extractor Directory....
So far the Automatic Process is done...
Memory Sections isnt done now, the Adress needs to be searched manual and inserted in the Extractor,
but im going now to start doing the MEMORY part...
Searchign for the I_TELEPORT as pattern Scan addingt the address to config...
its already prepared teh reading part in the Injection DLL...
@TieLay
im sorry but cleaned some files on the mega account.. so the download for the old Extractor is gone to...
i dont have the source anymore cause its the same im working at the moment...
ill upload it when im done with the Memory Part...
but if you want the current version write me a pm
but its somehow buggy on some parts...
- - - Updated - - -
yes.....
i managed the memory searching process to 95% ^^
Memory Pattern Scan ... coming to Pointer... I_TELEPORT...
0x1a33069 with 5103 Client..
need to fix to go up to the start call of that procedure...
0x01A33040 ^^
and the OpCodeExtractor wil be ready ...
@P5yl0
do you plan to share the src of the tool?
ill put a download on my page, when i fixxed the last step...
Updated: 05.02.2017!
Project now both ported to "NeoToolz"
tested and working with new Clients above 4xxx, i dont have no other Clients to test them...
1725 -not working-
---------------Originally Posted by P5yl0
i updata the taiwan client to the latest version and the info in the ReleaseRevision.txt file is :
SrcRegVer: 311462
ReleaseName: LIVE-52.03 TW #6
Version: LIVE-52.03 TW #6
ReleaseDate: 2017-01-17 오후 12:26:08
ShareRevision: 311378
ClientRevision: 311280
ServerRevision: 311462
ReleaseDataRevision: 293916
WebAppRevision: 311157
TeraReleaseName: LIVE-52.03 TW #6
-----------------
in my think ,the client is 5.x ??maybe it isn't canbe use on taiwan client??
because when i use the neotool to get the opencode,it will show me all done,but where is no file the output folder.
======================
i updata tw client again,it is :
SrcRegVer: 312435
ReleaseName: LIVE-53.03 TW #6
Version: LIVE-53.03 TW #6
ReleaseDate: 2017-02-15 오후 2:36:38
ShareRevision: 311905
ClientRevision: 312358
ServerRevision: 312435
ReleaseDataRevision: 296469
WebAppRevision: 312275
TeraReleaseName: LIVE-53.03 TW #6
-----
i am sure the neotools is not suit to tw client.
there si no files will be create in opcodes folder after injert.
i run it as adminstrator .but also faild.
Last edited by exe19890522; 24-02-17 at 04:18 PM.
Had no Problems..
as i said if they dont make any very very big updates like from 2.x > 3.x Version
the Key/IV Memory Section is one and the same no matter what Client Language it is...
maybe theres any other bug you found...
FileCopy after injection or else...?!?
Try to delete the config files and start the Tools,
they should create new config files if there are any Problems in the Config...
and create the folders..
.\output\datacenter
.\output\opcodes
but they should be created too if they dot exist...
[IMG][/IMG]
nice i del the config files and run that tools ,it have success.and i find it have many different between tw-opcode and skylake-emu.Had no Problems..
as i said if they dont make any very very big updates like from 2.x > 3.x Version
the Key/IV Memory Section is one and the same no matter what Client Language it is...
maybe theres any other bug you found...
FileCopy after injection or else...?!?
Try to delete the config files and start the Tools,
they should create new config files if there are any Problems in the Config...
and create the folders..
.\output\datacenter
.\output\opcodes
but they should be created too if they dot exist...
[IMG]
as you told me ,even i copy opcode to opcodeenum.h,it also will not work well.
does it means i must rebuild some code of skylake-emu?
which different of them,[#define OPCODE_VERSION 5002]i find this in opcodeenum.it means i need to use the 50.02 of tw client ?
i can't uniextract the 5002's tera.exe file from patch of tera,just 4804 and 5203,no 5002.
the opcodes are only like a command... so the server <-> client know what they are talking..
mostly it will work only updating the opcodes...
if its only 1-2 versions lets say.. 5202 > 5203 ...
most time there are only some very little changes
but when you update only the opcodes and on some part there was a change..
if its only i minimal shift it can happen
that the character HP moves in the data stream to the charcter EXP or other things like that...
so you will have in the Game.. some missmatchs ^^ like your HP is your Exp and such things..^
and when the changes are to big and the data stream is only a cowderwelsh.. shit...
the server will send the data to the client and it sends the data...
but the client doesnt understand it.. in 99% it will crash the game
and thats all...
you can try to update only opcodes from 1-2-3 versions up or down
mostly it will work in some way.. btu when you get on that part where the change was
the Computer says.. bye bye Tera
^^
Thank you for your explanation,I had know about this.
and i find many differents between skylake-emu and 5303 tw.another things is i can't login into LIVE-28.05 CN #55 (the latest version of RPC),so i can't find its opcode .
btw,why i use skylake-emu ,skylake-launcher,5302 tw client,but it can't login into game and emu have no anything to do .
Downloads links are dead - Your website seems to be down atm.
Latest NA Opcodes (05.06.2017), if need for someone
Has anyone already updated cryptography? :ъ
_http://rgho.st/6n28g6dLD
- - - Updated - - -
if u need opcodes from another client`s, just sent me Client Process Dump
cant download that tool link and his page is down can someone upload it or send me via pm? Greetings!
Last edited by Master2012; 28-03-20 at 06:30 PM.
reup link pls
i updated the link in first thread with meg.nz download link...
https://mega.nz/file/IxljiZLa#UomQKZ...opft3e4widodZI
Reply With Quote