Welcome!

Join our community of MMO enthusiasts and game developers! By registering, you'll gain access to discussions on the latest developments in MMO server files and collaborate with like-minded individuals. Join us today and unlock the potential of MMO server development!

Join Today!

DCUnpacker & OpCode Scanner

Joined
Dec 10, 2011
Messages
476
Reaction score
27
Updated: 05.02.2017!
Project now both ported to "NeoToolz"

tested and working with new Clients above 4xxx, i dont have no other Clients to test them...
1725 -not working-

---------------
i updata the taiwan client to the latest version and the info in the ReleaseRevision.txt file is :
SrcRegVer: 311462
ReleaseName: LIVE-52.03 TW #6
Version: LIVE-52.03 TW #6
ReleaseDate: 2017-01-17 오후 12:26:08
ShareRevision: 311378
ClientRevision: 311280
ServerRevision: 311462
ReleaseDataRevision: 293916
WebAppRevision: 311157
TeraReleaseName: LIVE-52.03 TW #6
-----------------
in my think ,the client is 5.x ??maybe it isn't canbe use on taiwan client??
because when i use the neotool to get the opencode,it will show me all done,but where is no file the output folder.
======================
i updata tw client again,it is :
SrcRegVer: 312435
ReleaseName: LIVE-53.03 TW #6
Version: LIVE-53.03 TW #6
ReleaseDate: 2017-02-15 오후 2:36:38
ShareRevision: 311905
ClientRevision: 312358
ServerRevision: 312435
ReleaseDataRevision: 296469
WebAppRevision: 312275
TeraReleaseName: LIVE-53.03 TW #6
-----
i am sure the neotools is not suit to tw client.
there si no files will be create in opcodes folder after injert.
i run it as adminstrator .but also faild.
 
Last edited:
Joined
Feb 2, 2012
Messages
412
Reaction score
249
Had no Problems..
as i said if they dont make any very very big updates like from 2.x > 3.x Version
the Key/IV Memory Section is one and the same no matter what Client Language it is...

maybe theres any other bug you found...
FileCopy after injection or else...?!?
Try to delete the config files and start the Tools,
they should create new config files if there are any Problems in the Config...
and create the folders..

.\output\datacenter
.\output\opcodes

but they should be created too if they dot exist...

[/IMG]
 

Attachments

You must be registered for see attachments list
Joined
Dec 10, 2011
Messages
476
Reaction score
27
Had no Problems..
as i said if they dont make any very very big updates like from 2.x > 3.x Version
the Key/IV Memory Section is one and the same no matter what Client Language it is...

maybe theres any other bug you found...
FileCopy after injection or else...?!?
Try to delete the config files and start the Tools,
they should create new config files if there are any Problems in the Config...
and create the folders..

.\output\datacenter
.\output\opcodes

but they should be created too if they dot exist...

[/IMG]

nice i del the config files and run that tools ,it have success.and i find it have many different between tw-opcode and skylake-emu.
as you told me ,even i copy opcode to opcodeenum.h,it also will not work well.
does it means i must rebuild some code of skylake-emu?
which different of them,[#define OPCODE_VERSION 5002]i find this in opcodeenum.it means i need to use the 50.02 of tw client ?
i can't uniextract the 5002's tera.exe file from patch of tera,just 4804 and 5203,no 5002.
 

Attachments

You must be registered for see attachments list
Joined
Feb 2, 2012
Messages
412
Reaction score
249
the opcodes are only like a command... so the server <-> client know what they are talking..

mostly it will work only updating the opcodes...
if its only 1-2 versions lets say.. 5202 > 5203 ...
most time there are only some very little changes

but when you update only the opcodes and on some part there was a change..

if its only i minimal shift it can happen
that the character HP moves in the data stream to the charcter EXP or other things like that...
so you will have in the Game.. some missmatchs ^^ like your HP is your Exp and such things..^

and when the changes are to big and the data stream is only a cowderwelsh.. poop...
the server will send the data to the client and it sends the data...
but the client doesnt understand it.. in 99% it will crash the game
and thats all...

you can try to update only opcodes from 1-2-3 versions up or down
mostly it will work in some way.. btu when you get on that part where the change was
the Computer says.. bye bye Tera
^^
 
Joined
Dec 10, 2011
Messages
476
Reaction score
27
the opcodes are only like a command... so the server <-> client know what they are talking..

mostly it will work only updating the opcodes...
if its only 1-2 versions lets say.. 5202 > 5203 ...
most time there are only some very little changes

but when you update only the opcodes and on some part there was a change..

if its only i minimal shift it can happen
that the character HP moves in the data stream to the charcter EXP or other things like that...
so you will have in the Game.. some missmatchs ^^ like your HP is your Exp and such things..^

and when the changes are to big and the data stream is only a cowderwelsh.. poop...
the server will send the data to the client and it sends the data...
but the client doesnt understand it.. in 99% it will crash the game
and thats all...

you can try to update only opcodes from 1-2-3 versions up or down
mostly it will work in some way.. btu when you get on that part where the change was
the Computer says.. bye bye Tera
^^

Thank you for your explanation,I had know about this.
and i find many differents between skylake-emu and 5303 tw.another things is i can't login into LIVE-28.05 CN #55 (the latest version of RPC),so i can't find its opcode .
btw,why i use skylake-emu ,skylake-launcher,5302 tw client,but it can't login into game and emu have no anything to do .
 
Newbie Spellweaver
Joined
Apr 20, 2015
Messages
16
Reaction score
0
the opcodes are only like a command... so the server <-> client know what they are talking..

mostly it will work only updating the opcodes...
if its only 1-2 versions lets say.. 5202 > 5203 ...
most time there are only some very little changes

but when you update only the opcodes and on some part there was a change..

if its only i minimal shift it can happen
that the character HP moves in the data stream to the charcter EXP or other things like that...
so you will have in the Game.. some missmatchs ^^ like your HP is your Exp and such things..^

and when the changes are to big and the data stream is only a cowderwelsh.. poop...
the server will send the data to the client and it sends the data...
but the client doesnt understand it.. in 99% it will crash the game
and thats all...

you can try to update only opcodes from 1-2-3 versions up or down
mostly it will work in some way.. btu when you get on that part where the change was
the Computer says.. bye bye Tera
^^

Downloads links are dead - Your website seems to be down atm.
 
Junior Spellweaver
Joined
Jul 23, 2013
Messages
108
Reaction score
86
Re: DCUnpacker &amp; OpCode Scanner

Latest NA Opcodes (05.06.2017), if need for someone
Has anyone already updated cryptography? :ъ
_http://rgho.st/6n28g6dLD



if u need opcodes from another client`s, just sent me Client Process Dump
 
Junior Spellweaver
Joined
Nov 11, 2013
Messages
159
Reaction score
36
cant download that tool link and his page is down can someone upload it or send me via pm? Greetings!
 
Last edited:
Joined
Feb 2, 2012
Messages
412
Reaction score
249
@SarahPiper & leidalinck
can you 2 please explain what your talking.. your posts dont make any sense for me ?!?

This is/was a thread for TERAs - DATACENTER Unpacking and Game OpCode Scanning...
Why should such tools be disguiesed?

Maybe what you are searching are backdoors/trojans ... then this is the wrong section !
 
Newbie Spellweaver
Joined
Aug 12, 2021
Messages
5
Reaction score
0
hi, what all does this tool do? like can i unpack a DC and then re-pack it after editing?
 
Joined
Feb 2, 2012
Messages
412
Reaction score
249
hi, what all does this tool do? like can i unpack a DC and then re-pack it after editing?

as it says, Unpacker only .. and the tools are outdated so far..
both moved into one as "NeoToolz" a while ago...
also they only work with 32bit TERA... so far i know every Client after 9203/9204 is 64bit
so they should be useless for now!

for unpacking and repacking and 64bit support you should lookout for DCTool from Narcis...
 
Back
Top