[help] I Can't Connect To My Own Server But Every 1 Else Can.

[gollys]

Hey.. i made a season 3 server and everyone can connect to the server but me. I have tried using port trigger and pf config to try help me connect. I don't have a router and i should be able to connect but i cant can anyone help?


:vamplaser:vamplaser:vamplaser

[MentaL]

[bramdebouvere]

Maybe you can consider using a VPN to connect to your server

[VizeR.D]

If your using the same computer to play mu and run the server then use ur LAN ip...but that is not advised (playing mu and running serv on same comp)

[bramdebouvere]

Thats true.. its surtenly not advised to play and host on the same computer..

[ETTETT]

I dont know anything but try this things..

Make own launcher, 127.0.0.1 : 44405
If it doest work, look if your ip is starting 192. it doesnt work :P

192 starting ips doest work on share connection :P

Just others but no 192..

I haved 192 i changed my modem and my modem ports are now open and my ip changed to 91. something then now my chare work..

But, problem can are too in CS if you have different port on it..

[Macbeth]

Just use your LAN-ip to connect to your server, and just a strong advise on the way, do not use the same computer to play and hosting your server on.

[MuIsBest]

If you got router open 44405 both

If its not allowed then open 44404 - 44406 then the 44405 will be open (both).

- MIB

[Delta]

Try connect 127.0.0.1 (if the server is on your conputer)
If the server is on another go computer; Start->Run->type: cmd-> write ipconfig and after copy the ipadresse and make a launcher with that one and (the local ip)

[pincukas]

i have a same problem.. i have server with local ip.. 127.0.0.1... i cant login.. but my lan ppls can.. and on launcher show what server are on...

[pincukas]

i have same porblem then i use 127.0.0.1 ip i cant login... but if i use ip adress what showing on cmd showing server but then i press on his i get dc

[Delta]

i have same porblem then i use 127.0.0.1 ip i cant login... but if i use ip adress what showing on cmd showing server but then i press on his i get dc

I don't quite understand you?, are you running the server on your own computer?

If "127.0.0.1" don't work then try put "Localhost" instead.

If the server is remote, then you can't use 127.0.0.1

[I Rule MU]

I had that same problem a while back. I just gave up...

[pincukas]

I don't quite understand you?, are you running the server on your own computer?

If "127.0.0.1" don't work then try put "Localhost" instead.

If the server is remote, then you can't use 127.0.0.1

mhm...... ok.. but can you tell me how can i open ports?

[AnGeLsPaIn]

i have the same problem that u i have 1.04h files i have a router btw and ppl can connect but i dunt even see the login bar i hope anyone can help me btw happy x-mas to all

[mosberg]

i dont know if this is necessary but i followed this guide and i connect successful.
http://forum.ragezone.com/f196/guide...ame-pc-296068/