Help with Crywolf/Lorendeep warp with Namech Files

[martinx09]

So, both crywolf and lorendeep were working just fine,
event was working too, then from a minute to another it started to show the error "Not able to warp to that location". (Using /move crywolf, or M, or walking through the Gates).

So I tried to use /gmove with my GM, and it didn't worked, just sended me to Lorencia.
I thought it was a problem with GS_CS but it's running without errors,
then thought it was the joinserver, but that's running fine too, and connectserver shows "Joinserver: ON".

So then I disabled all on mapserverinfo (adding // to the lines about crywolf, lot and lorendeep),
and now I can warp using /gmove, but /move and walking through gates shows the same error "Not able to warp".

I don't know what else to do,
/move crywolf command uses gate 118 which is fine I believe on gate.txt file:

118 0 34 229 37 239 46 0 0 10

It's strange because now maps are (supposed to be) running on GS, not GS_CS as I disabled it on mapserverinfo.
And a prove of that is that I added monsters on monstersetbase instead of mobsetbase_cs and they appeared fine on the map.

But players can't access the map because warp is not working.
Also the Gameserver shows this message:

Use /warp Crywolf Fail Gatenumber = 118
But as I showed above, the gate is fine, and I've never changed gate information, and it was working just fine before.

Any help?

[MentaL]

[KarLi]

Hello,

I've had a strange similar issue , i think its because of the GS_CS it just closes the connections for players to move there , you might check the logs on gs folder on logs , and might find something , also when u try to go theere through gates it should show an error or something.

peace

[martinx09]

Hello,

I've had a strange similar issue , i think its because of the GS_CS it just closes the connections for players to move there , you might check the logs on gs folder on logs , and might find something , also when u try to go theere through gates it should show an error or something.

peace

Hi thanks for your answer,
and which gs_cs could I use instead?

[KarLi]

there is 1.00.19 GS_CS and 1.00.18 GS_CS

try this:
http://www23.zippyshare.com/v/76954181/file.html

[martinx09]

The GS I'm using (Normal GS not GS_CS) is 1.00.18 and the GS_CS you gave me is 1.00.19 is that okay?
I mean, could there be any compatibility issues or something?

[KarLi]

No , just try it , Simple task and test it out =)

[martinx09]

Didn't worked,
MMT_MoveReq.txt not found,
could you give me MMT files lacking?
Or another GS_CS compatible with Namech files?

Thanks!

[KarLi]

Well u could download MMT Files and use the MMTData on server files folder for it , but i also recommend u to use mmt files instead namech.

[martinx09]

Well u could download MMT Files and use the MMTData on server files folder for it , but i also recommend u to use mmt files instead namech.

I'll try to run gs_cs with MMTData,
but Namech files are working very stable so I don't want to change the files unless it's absolutely necesary. :)

- - - Updated - - -

Hey!
I downloaded MMT Files, but there was no MMT_MoveReq file,
could you please give me the link to the files or thread?

- - - Updated - - -

Forget it, it wasn't the GS_CS, I managed to make MMT gs_cs work and it's the same, can't warp to crywolf/lot/lorendeep.

[KarLi]

Well perphaps the mapserverinfo.dat is somehow having wrong configurations ?

[martinx09]

I don't think so,

//==========================================================================
//Project: NaMEch
//Sources: NaM4
//Re-Struct & Fixes: Echy-
//Information: Map Server Info
//=========================================================================
////////////////////////////////////////////////////////////////////////////////
// 1. Informacion de la IP y PUERTO del servidor
//
//
// -1 : La conexion puede no ser correcta
// 0 : La conexion puede no ser correcta
// 1 : Posibilidad de conexión
//
// CodigoServer MapServerGroup ConfInicial IP PUERTO
//-----------------------------------------------------------------------------
0
0 0 1 "Smyiphere" 55901
19 0 0 "Smyiphere" 55919
end
//
//
// CodigoServer OpcionesMove Mapa CodigoServerDestino
// (Server cord) (move si o no) (Maeb) (codigo del servidor destino)
//-----------------------------------------------------------------------------
1
0 0 30 19
0 0 31 19
0 0 34 19

19 1 30 -1
19 1 31 -1
19 1 34 -1
end

[KarLi]

"Smyiphere"

is the ip with quotes?

[martinx09]

is the ip with quotes?

Yes like this: "S123.456.78.90"

[KarLi]

Ok remove the quotes " "

correct is:

//==========================================================================
//Project: NaMEch
//Sources: NaM4
//Re-Struct & Fixes: Echy-
//Information: Map Server Info
//=========================================================================
////////////////////////////////////////////////////////////////////////////////
// 1. Informacion de la IP y PUERTO del servidor
//
//
// -1 : La conexion puede no ser correcta
// 0 : La conexion puede no ser correcta
// 1 : Posibilidad de conexión
//
// CodigoServer MapServerGroup ConfInicial IP PUERTO
//-----------------------------------------------------------------------------
0
0 0 1 Smyiphere 55901
19 0 0 Smyiphere 55919
end
//
//
// CodigoServer OpcionesMove Mapa CodigoServerDestino
// (Server cord) (move si o no) (Maeb) (codigo del servidor destino)
//-----------------------------------------------------------------------------
1
0 0 30 19
0 0 31 19
0 0 34 19

19 1 30 -1
19 1 31 -1
19 1 34 -1
end

[martinx09]

Still the same.

[KarLi]

any errors in GameServer_Cs mate?

[martinx09]

any errors in GameServer_Cs mate?

No gs_cs shows no errors,
gs shows bad gatenumber as before.

[KarLi]

Then its gatenumber problem mate? :)

You want me to give you my movereq files to test?

Peace

[martinx09]

Then its gatenumber problem mate? :)

You want me to give you my movereq files to test?

Peace

It's not movereq and it's not gate.txt either,
moves were working perfectly in the past and I've never changed them.
Also the only maps that show gatenumber error are the ones from mapserverinfo: crywolf, land of trials, valley of loren.

[KarLi]

well show me the error screenshot.

[martinx09]

well show me the error screenshot.

From logs:

[16:31:40] [martinx09] [Martin] Use [/warp Crywolf] Fail GateNumber = 118

As I said,
Gate number 118 exists and points to map 34 (crywolf),
movereq points to gate 118.
And I never changed any of that information and it was working some time ago,
so I don't believe it's a problem of gate/movereq.

[KarLi]

Okay then u will need to reinstall everything again mate , its just some mistake configuration that u forgot probably.