UDP and TCP prob..

[jeboi1968]

Hi all! im new here.. wanna ask if someone can give me a tutorial on how to open/unblock my tcp and udp ports? Godbless thanks in advance..

[MentaL]

[KarLi]

Go to Start>Run>Cmd> Type IPCONFIG press enter. take the defaulty gateway IP. copy it.
go to url adress. paste it . enter . login with admin details if u dont know google ur router and find the admin acc and pass example admin 1234 or root 1234/123456.

then go to portforwarding table find it on there and open port UDP and TCP on 44405 and 55901 port on ur IPv4 IP . not on ur default gateway IP
ex- def IP = 192.168.1.1/0.1 etc
ex- IPv4 IP = 192.168.1.102/101/100 etc
IPv4 IP = can be found at cmd>run>ipconfig > open the ports on it.
then.. run ur muonline server and go to Open Port Check Tool put the ports and see if its success ;)

[Edison]

Go to Start>Run>Cmd> Type IPCONFIG press enter. take the defaulty gateway IP. copy it.
go to url adress. paste it . enter . login with admin details if u dont know google ur router and find the admin acc and pass example admin 1234 or root 1234/123456.

then go to portforwarding table find it on there and open port UDP and TCP on 44405 and 55901 port on ur IPv4 IP . not on ur default gateway IP
ex- def IP = 192.168.1.1/0.1 etc
ex- IPv4 IP = 192.168.1.102/101/100 etc
IPv4 IP = can be found at cmd>run>ipconfig > open the ports on it.
then.. run ur muonline server and go to Open Port Check Tool put the ports and see if its success ;)

Thanks.. but i forgot to say that im using a wireless broadband,,Is it possible for me to run my own server? with my connection? thanks....

[KarLi]

only if u open ur ports its possible if not
u must use hamachi there's tutorials.