Hi, I have a little bug in my server o.o, all the items descriptions are in a Stupid language, can anoyone explain me how to fix it?
EDIT: Sorry!! I found it! ^^U Im so lazy...
Printable View
Hi, I have a little bug in my server o.o, all the items descriptions are in a Stupid language, can anoyone explain me how to fix it?
EDIT: Sorry!! I found it! ^^U Im so lazy...
Hey guys, I'm still having the "map configuration file not found at : conf/map_athena.conf" issue, and the one solution I found here isn't the problem - I'm all updated. And, the file is most definitely there. Can someone help me out?
(=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=)
( (c)2004 eAthena Development Team presents )
( ______ __ __ )
( /\ _ \/\ \__/\ \ v 1.00.00 )
( __\ \ \_\ \ \ ,_\ \ \___ __ ___ __ )
( /'__`\ \ __ \ \ \/\ \ _ `\ /'__`\/' _ `\ /'__`\ )
( /\ __/\ \ \/\ \ \ \_\ \ \ \ \/\ __//\ \/\ \/\ \_\.\_ )
( \ \____\\ \_\ \_\ \__\\ \_\ \_\ \____\ \_\ \_\ \__/.\_\ )
( \/____/ \/_/\/_/\/__/ \/_/\/_/\/____/\/_/\/_/\/__/\/_/ )
( _ _ _ _ _ _ _ _ _ _ _ _ _ )
( / \ / \ / \ / \ / \ / \ / \ / \ / \ / \ / \ / \ / \ )
( ( e | n | g | l | i | s | h ) ( A | t | h | e | n | a ) )
( \_/ \_/ \_/ \_/ \_/ \_/ \_/ \_/ \_/ \_/ \_/ \_/ \_/ )
(=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=)
---Start reading of Login Server configuration file (conf/login_athena.conf)
---End reading of Login Server configuration file.
---Start reading Lan Support configuration file
LAN IP of char-server: (IHideMyIP)
Sub-network of the char-server: (IHideMyIP)
Sub-network mask of the char-server: 255.255.255.255.
LAN test of LAN IP of the char-server: LAN test (result): LAN source.
---End reading of Lan Support configuration file
read_gm_account: file [conf/GM_account.txt], invalid 'id_acount level' format.
read_gm_account: file 'conf/GM_account.txt' readed (1 GM accounts found).
mmo_auth_init: 7 accounts read in save/account.txt,
of which is 1 GM account, and 5 server accounts ('S').
The login-server is ready (Server is listening on the port 6900).
That the first problem.. now i understand why the char-server keep said "Attempt to connect to login-server , set eof :4 , Char-server can't connect to login-server <connection #4>. because the problem at login-server.
My problem is how need to close this
---Start reading Lan Support configuration file
LAN IP of char-server: (IHideMyIP)
Sub-network of the char-server: (IHideMyIP)
Sub-network mask of the char-server: 255.255.255.255.
LAN test of LAN IP of the char-server: LAN test (result): LAN source. And
---End reading of Lan Support configuration file
read_gm_account: file [conf/GM_account.txt], invalid 'id_acount level' format.
read_gm_account: file 'conf/GM_account.txt' readed (1 GM accounts found).
mmo_auth_init: 7 accounts read in save/account.txt,
of which is 1 GM account, and 5 server accounts ('S').
The login-server is ready (Server is listening on the port 6900).
Example : ---End reading of Login Server configuration file.
If it already close like what at i write the example. The char-server will not keep said Attempt To Connect Login-Server.
I hope you understand
1---so with the whole athena folder do i have to move it somewhere? or do i just keep it in C drive?
2---also, when i run the hexedRO and i try login it always says failed to connect to server!
3---when i run runserver.bat, it sais on char server attempting to connect to login server....failed
and with map server failed to connect to the char server
Is it because they are listening on diff. ports?
4---LASTLY, how do i change server to english?
I have a problem here, The Mapserver wont connect to the charserver, everything is fine other then that.
When I logon I get a "Failed to connect to server" after selecting my character. I'm using the loopback IP address of 127.0.0.1 (just wanna play by myself for now) so I dont see why it would be a problem. Any help would be appreciated.
My server is all in Korean! i cant understando nothing, teach me how to change this plz!
Hey Guys could u do a little movie to show how u create a server..??
I worked so long but it wont work....I am so mad about it...
hope u can help me
err....im running on LAN and wen i try to connect my map server the map server...it says attempting to connect to char server....and it never connects....can anybody help me? im hosting on a router
help. . when i open hexedro i got a problem like Load MapInfoTable Failed..help me
is it that when i log in and play my own server those npc talk in words are in english, well..... when i look my item on my inventory or my equip item or those item that drop on the floor is in other langauge which i dun understand at ALL! well hope anyone can help mi with this problme... Thk :kiss2:
This guides so old, which is why I don't even recommend using it. Search the forums for my guide... It's the most up-to-date and includes how to translate everything.
can you help me the char server has an error dat that says(char server cant connoect to login server<connection #4>) and keeps repeating
and the map server says (map server cant connect to char server<connection #7>) and also repeating.....
pls help me been trying to fix this fo days!(email me at danilo2535@yahoo.com)
Hey i got a problem ... when i open Runserver.bat Login.exe works fine ..... the Char-server.exe keeps repeting connecting to login-srv it can never connect i open up the login server and it says yea im all good and connected but when i look at map server its jus spamming over and over the directory to the athena file when i open them all MANUALY the login is all sweet but the char server is doin same as before but map server dosnt even open it will open for like a split second and close again PLEASE PLEASE PLEASE HELPPP MMEEEEE.....;. o and when i go into CMD i get on the D: then type cd athena and it says theres no such path specified
:);) please help
http://forum.ragezone.com/images/icons/icon7.gif i need help NOW - 1 Minute Ago
I followed the instructions exactly as it said but when i try to log in to the server (with hexedro.exe) and write "myaccname_m) and my pass and click enter it it just appear a white little square with no text in, and nothing happens, but on the emulator it says that i tryed to connect whats the problem ?please answer ASAP u can !!thank you.(Nice guide!)http://forum.ragezone.com/images/icons/icon7.gif
I think u is using an normal Hexed.exe . I tried before. I will appear nothing but when login, i will appear. I think its about the hexed.exe problem. Can you please take some screenshot for us to check? Maybe we can help u.
Its nothing with the cmd. The problem is at ur conf. Firstly. Check these file.Quote:
Originally Posted by alpy
1)char_athena
login_ip: local ip 127.0.0.1
char_ip: WAN IP OR NOIP
2)landim_athena
login_ip: local ip
3)login_athena
nothing to do with it. Just change gm_pass for security
4)map_athena
char_ip: local ip
map_ip: WAN IP or NOIP
NOTE If u didint have fixed IP. Please visit No-IP - Dynamic DNS, Static DNS for Your Dynamic IP .REgister and download its file. If u register xxx.no-ip.info . Just paste it as WANIP . Hope this can you!!
this may be old, but following the step by step guide i manage to configure it. Just read the whole post if you get lost.
Hi! Guys i've just installed the latest "eAthena-TXT-8958[Trunk]" but still have some bugs on it like:
1) monster movement are not working (monsters stay still no animation)
2) attack speed does not increament while leveling up it stays only to "100"
3) problems with Gunslinger, taekwon and ninja jobs
the monster animation will do and the attack speed but for #3 still can wait =)
we appreciate your help
and also for some places they are looking for "sprite\,.Ò½AÏ\1_ect_01.spr" and "sprite\,.Ò½AÏ\1_ect_01.act".
help plss..im still working on this problem..i want my friends play in my server..but they olways failed to connect..ive tried many guide i follow them all..but still it wont work..im using no ip coz my wan is dynamic..im facing this problem for almost two weeks..help me plsss..i really need your help guys..tnx
do i need to forwrd port?..i dont have a router i have only one computer..ive tried evrything but still it wont work..what should i do?..T_T
Man , if you is not a router user . The port are all opened. So you have to turn off the firewall to let other pass. Off all your firewall when you want to let other people play.
hi i`m new hire and i`m getting some prob like i cant get to server with my IP adress "sob", and i see stupid words on the modification of the item and skills when right clicking it and i`m kinda new so teach me how to use this account thingy
sry but i need the answer quick or i cant see it "sob"
ohh in short i cant get online.
Give more detail. let us see ur map_athena , char_athena and log_athena
bro stil wont work..i disable my firewall and let my friends connect..still failed to connect to server..im sick and tired of this..huhuhuh...help plssss...
Man. I gotta tell you. Try to resetup your Emu. And then try again. Make sure that Ip , sclientinfo and all firewall is off.
[IMG]file:///C:/DOCUME%7E1/Sheen/LOCALS%7E1/Temp/moz-screenshot.jpg[/IMG]please visit this 2 site....this is the image that I use so that you could see the error that i made....I use the eAthena SVN TXT Server from SVN Release.........(http://www.geocities.com/burn_x01/iwll1.htm) and (http://www.geocities.com/burn_x01/iwll.htm)
POE FABOR SI ALGUIEN HABLA ESPA
I followed this guide, now I got this problem, the server is up, but only the computer in the same router as the server can connect to the server, but when I give the hexedRO and Sclientinfo to my friends, they got a message "Can't Connect to server". Any solution for this?
Edit: to give more details, I checked my IP with Cmd --> ipconfig it gave me an IP, but when I check in whatismyip.com it gave me another ip, I'm confused now. :S
try to look at your so called "local erea connection" then click support if you have them then there will be "IP ADDRESS" there and you didnt gave a "sclientinfo.xml"?
AND SOME ERROR SOB MY MAP_server.exe cant connect to the char_sever.exe
so i get some unfound MAPS sob
any solution for an un readable item even skills(when i right click them i cant read the language)
SRY phakorn214 i fixed my error that i cant get online thingy heh the IP address was wrong, and i recocgnise the LOCAL EREA CONNECTION
having an IP ADDRESS i tryed it and it worked but my big big prob is there are some error,that my map_server.exe cant connect to the char_server.exe
so the error will be some missing maps coze the map_sever.exe is useless if it cant connect to my char_server.exe
and i`m getting 2 minds coze of the lines that the map server exe wrote at the black thingy in short it said (124.192.168.1.102 -> 124.192.168.1) i mean like it just change the IP
Please post us your landim_athena , char_athena and map_athena for correction.
somebody has a better solution to my problem?
The ip you checked from the cmd is just a local ip. So you should get your Wan ip at IP Chicken - What is my IP? Find Your IP Address!Quote:
Originally Posted by ericbp100
still got the problem now the athena not even connect, look I hope you can help me:
char_athena:
map_athena:Quote:
// Athena Character configuration file.
// Server Communication username and password.
userid: s1
passwd: p1
// Server name, use alternative character such as ASCII 160 for spaces.
server_name: eAthena
// Login Server IP
login_ip:10.0.0.9
// Login Server Port
login_port: 6900
// Character Server IP
char_ip:66.98.29.151
// Character Server Port
char_port: 6121
// Is Character server in maintainence mode?
char_maintenance: 0
// Enable or disable creation of new characters.
char_new: 0
// Maximum users able to connect to the server. Set to 0 for unlimited.
max_connect_user: 0
// How often should the server save? (In seconds)
autosave_time: 30
// How often should the server save a backup? (In seconds)
autosave_time: 15
// Character server flatfile database
char_txt: save/athena.txt
// Character server flatfile database (backup)
backup_txt: save/athena_backup.txt
// Start point, Map name followed by coordinates (x,y)
start_point: new_1-1.gat,53,111
// Starting zeny for new characters
start_zeny: 500
// Name used for unknown characters
unknown_char_name: Unknown
// Log Filename
char_log_filename: log/char.log
// Allow or not identical name for characters but with a different case (upper/lower):
// example: Test-test-TEST-TesT; Value: 0 not allowed (default), 1 allowed
name_ignoring_case: 0
// Manage possible letters/symbol in the name of charater. Control character (0x00-0x1f) are never accepted. Possible values are:
// 0: no restriction (default)
// 1: only letters/symbols in 'char_name_letters' option.
// 2: Letters/symbols in 'char_name_letters' option are forbidden. All others are possibles.
char_name_option: 0
// Set the letters/symbols that you want use with the 'char_name_option' option.
// Note: add 'space' between 2 others letters/symbols.
// default: void.
//char_name_letters:
// Filename of the file which receives the online players list in text
online_txt_filename: online.txt
// Filename of the file which receives the online players list, but in html version
online_html_filename: online.html
// Choose how to display online players.
// 0: no sorting (default)
// 1: by alphabetical order of their name
// 2: by number of their zenys
// 3: by their base level
// 4: by their job (and job level inside the same job)
// 5: by alphabetical order of their actual map location
online_sorting_option: 0
// Choose which columns that you want display in the online files. Do the addition of these values:
// (if value is 0, no file is done)
// 1: name (just the name, no function like 'GM')
// 2: job
// 4: levels
// 8: map name
// 16: mapname and coordonates
// 32: zenys
// 64: name (with 'GM' if the player is a GM)
// default value: 1 (only name)
online_display_option: 1
// minimum GM level to display 'GM' when we want to display it (default: 1)
online_gm_display_min_level: 1
// refresh time (in sec) of the html file in the explorer (default 20)
online_refresh_html: 20
// If you want use an additional configuration file, uncomment and use this parameter
//import: path/additional_configuration_file
ladmin_athena:Quote:
// ______ __ __
// /\ _ \/\ \__/\ \
// __\ \ \L\ \ \ ,_\ \ \___ __ ___ __
// /'__`\ \ __ \ \ \/\ \ _ `\ /'__`\/' _ `\ /'__`\
///\ __/\ \ \/\ \ \ \_\ \ \ \ \/\ __//\ \/\ \/\ \L\.\_
//\ \____\\ \_\ \_\ \__\\ \_\ \_\ \____\ \_\ \_\ \__/.\_\
// \/____/ \/_/\/_/\/__/ \/_/\/_/\/____/\/_/\/_/\/__/\/_/
// _ _ _ _ _ _ _ _ _ _ _ _ _
// / \ / \ / \ / \ / \ / \ / \ / \ / \ / \ / \ / \ / \
//( e | n | g | l | i | s | h ) ( A | t | h | e | n | a )
// \_/ \_/ \_/ \_/ \_/ \_/ \_/ \_/ \_/ \_/ \_/ \_/ \_/
//
//--------------------------------------------------------------
//eAthena Map-Server Configuration File
//--------------------------------------------------------------
//--------------------------------------------------------------
// Configuration Info
//--------------------------------------------------------------
// Interserver communication passwords, set in account.txt (or equiv.)
userid: s1
passwd: p1
// Character Server IP
char_ip:10.0.0.9
// Character Server Port
char_port: 6121
// Map Server IP
map_ip:66.98.29.151
// Map Server Port
map_port: 5121
// Database autosave time, in seconds.
autosave_time: 60
// Message of the day file, when a character logs on, this message is displayed.
motd_txt: conf/motd.txt
// When @help or @h is typed when you are a gm, this is displayed for helping new gms understand gm commands.
help_txt: conf/help.txt
mapreg_txt: save/mapreg.txt
[QUOTE]// Athena Ladmin configuration file.
// Login Server IP
login_ip:10.0.0.9
// Login Server Port
login_port: 6900
// Administrative password, used to connect remotely to server.
// NOTICE: If you enable remote administration, you should change its value for security
admin_pass: admin
// Encoding type of the password
// 0: not encoded
// 1: key+password
// 2: password+key
passenc: 2
// Language of ladmin
// F: Fran
i already told you ericbp100 its in LOCAL EREA CONNECTION on the bottom right drawn as 2 computer (the IP ADDRESS)
man. I've already put my Wan, my local IP I've tried putting everything, I just posted that to phakorn214 see if there's something wrong. cause the server works, but with the computer in the same router, when I gave the hexed and scclientinfo to my friends it doenst work, they get "Can't connect to server".
you might wanna check my sclientinfo if its almost desame
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
<?xml version="1.0" encoding="euc-kr" ?>
<clientinfo>
<desc>Ragnarok Client Information - Taiwan Version</desc>
<servicetype>korea</servicetype>
<servertype>sakray</servertype>
<connection>
<display>MY WORLD BITCH</display>
<desc>Ragnarok Online</desc>
<address>HEH MEH</address>
<port>6900</port>
<version>20</version>
<langtype>07</langtype>
<registrationweb>Athena</registrationweb>
</connection>
</clientinfo>
i fixed my MAP ERROR ok,but i`ll still give you ok phakorn214 i`ll give you my arangement(now my error is i cant get in the game)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// Athena Character configuration file.
// Server Communication username and password.
userid: s1
passwd: p1
// Server name, use alternative character such as ASCII 160 for spaces.
server_name: eAthena
// Login Server IP
login_ip: 192.168.1.102
// Login Server Port
login_port: 6900
// Character Server IP
char_ip: 192.168.1.102
// Character Server Port
char_port: 6121
// Is Character server in maintainence mode?
char_maintenance: 0
// Enable or disable creation of new characters.
char_new: 0
// Maximum users able to connect to the server. Set to 0 for unlimited.
max_connect_user: 0
// How often should the server save? (In seconds)
autosave_time: 30
// How often should the server save a backup? (In seconds)
autosave_time: 15
// Character server flatfile database
char_txt: save/athena.txt
// Character server flatfile database (backup)
backup_txt: save/athena_backup.txt
// Start point, Map name followed by coordinates (x,y)
start_point: new_1-1.gat,53,111
// Starting zeny for new characters
start_zeny: 5000000
// Name used for unknown characters
unknown_char_name: Unknown
// Log Filename
char_log_filename: log/char.log
// Allow or not identical name for characters but with a different case (upper/lower):
// example: Test-test-TEST-TesT; Value: 0 not allowed (default), 1 allowed
name_ignoring_case: 0
// Manage possible letters/symbol in the name of charater. Control character (0x00-0x1f) are never accepted. Possible values are:
// 0: no restriction (default)
// 1: only letters/symbols in 'char_name_letters' option.
// 2: Letters/symbols in 'char_name_letters' option are forbidden. All others are possibles.
char_name_option: 0
// Set the letters/symbols that you want use with the 'char_name_option' option.
// Note: add 'space' between 2 others letters/symbols.
// default: void.
//char_name_letters:
// Filename of the file which receives the online players list in text
online_txt_filename: online.txt
// Filename of the file which receives the online players list, but in html version
online_html_filename: online.html
// Choose how to display online players.
// 0: no sorting (default)
// 1: by alphabetical order of their name
// 2: by number of their zenys
// 3: by their base level
// 4: by their job (and job level inside the same job)
// 5: by alphabetical order of their actual map location
online_sorting_option: 0
// Choose which columns that you want display in the online files. Do the addition of these values:
// (if value is 0, no file is done)
// 1: name (just the name, no function like 'GM')
// 2: job
// 4: levels
// 8: map name
// 16: mapname and coordonates
// 32: zenys
// 64: name (with 'GM' if the player is a GM)
// default value: 1 (only name)
online_display_option: 1
// minimum GM level to display 'GM' when we want to display it (default: 1)
online_gm_display_min_level: 1
// refresh time (in sec) of the html file in the explorer (default 20)
online_refresh_html: 20
// If you want use an additional configuration file, uncomment and use this parameter
//import: path/additional_configuration_file
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// Athena Login Server configuration file.
// Translated by Peter Kieser <pfak@telus.net>
// put here the LAN IP of your char-server
lan_char_ip: 192.168.1.102
// put here the LAN IP of your map-server
lan_map_ip: 192.168.1.102
// put here the Subnet mask of your LAN
subnet: 192.168.1.102
subnetmask: 255.255.255.0
// Port to bind Login Server to (always binds to all IP addresses)
login_port: 6900
// Whether remote administration is enabled or disabled (1 for enabled, 0 for disabled)
admin_state: 0
// Administrative password, used by ladmin (perl software) to connect remotely to server.
// NOTICE: If you enable remote administration, you should change its value for security
admin_pass: admin
// Indicate the IP that the server accepts for remote administration.
// put: 'all', or 'xxx.xxx.' (begin of an ip finished by '.' or a complete ip),
// or a network and its mask (example: '123.456.789.012/24' or '123.456.789.012/255.255.255.0')
// or 'clear' to suppress previous parameter (use it in import file mainly)
// Add as many IP's as you wish.
ladminallowip: all
// Gamemaster password, used with the @gm command to obtain higher privs.
// NOTICE: You should also change this one.
gm_pass: 24700
// Can you make new accounts on the server? (1 for Yes, 0 for no)
new_account: 1
// Account flatfile database, stores account information.
account_filename: save/account.txt
// What account AIDs have GM privs, and what level? (Also set in map_athena.conf)
gm_account_filename: conf/GM_account.txt
// Log Filename. All operations received by the server are logged in this file.
login_log_filename: log/login.log
// Name of the file of that logs the unknown packets (for debug or hack check)
login_log_unknown_packets_filename: log/login_unknown_packets.log
// Indicate if the unknown packets are saved or not
//(the unknown packets coming from the char-server or ladministration does not relate to, which is always saved)
// Be careful: if you receive an attack, your hard disk can cause lag...
// So, active this option with a speed hard disk or for debug only.
save_unknown_packets: 0
// Indicate if you want display the parse of the packets received in a normal connection
// It's useful for debug. Possible values: 0: no (default), 1: yes
display_parse_login: 0
// Indicate if you want display the parse of the packets received in administration connection
// It's useful for debug. Possible values: 0: no (default), 1: yes
display_parse_admin: 0
// Indicate if you want display the parse of the packets received from a char-server
// It's useful for debug. Possible values: 0: no (default), 1: yes (without packet 0x2714), 2: all packets
display_parse_fromchar: 0
// Indicate how to display date in logs, to players, etc.
// 0: 31-12-2004 23:59:59
// 1: 12-31-2004 23:59:59
// 2: 2004-31-12 23:59:59
// 3: 2004-12-31 23:59:59 (default)
date_format: 3
// Indicate the minimum GM level of player that the server accepts to connection.
// 0: all players (normal player are 0. it's default), 1-99: GM level at least with level x
min_level_to_connect: 0
// Specify order of IP control if necessary (option: 'deny,allow', 'allow,deny', or 'mutual-failture')
// (how to use 'allow' and 'deny' information)
//order: allow,deny
// Indicate the IP that the server accept.
// put: 'all', or 'xxx.xxx.' (begin of an ip finished by '.' or a complete ip),
// or a network and its mask (example: '123.456.789.012/24' or '123.456.789.012/255.255.255.0')
// or 'clear' to suppress previous parameter (use it in import file mainly)
// Add as many IP's as you wish.
//allow: all
// Indicate the IP that the server refuse.
// Add as many IP's as you wish, as long as you put deny: before it.
//deny: 123.123.123.123
//deny: 234.234.234.234
// If you want use an additional configuration file, uncomment and use this parameter
//import: path/additional_configuration_file
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// ______ __ __
// /\ _ \/\ \__/\ \
// __\ \ \L\ \ \ ,_\ \ \___ __ ___ __
// /'__`\ \ __ \ \ \/\ \ _ `\ /'__`\/' _ `\ /'__`\
///\ __/\ \ \/\ \ \ \_\ \ \ \ \/\ __//\ \/\ \/\ \L\.\_
//\ \____\\ \_\ \_\ \__\\ \_\ \_\ \____\ \_\ \_\ \__/.\_\
// \/____/ \/_/\/_/\/__/ \/_/\/_/\/____/\/_/\/_/\/__/\/_/
// _ _ _ _ _ _ _ _ _ _ _ _ _
// / \ / \ / \ / \ / \ / \ / \ / \ / \ / \ / \ / \ / \
//( e | n | g | l | i | s | h ) ( A | t | h | e | n | a )
// \_/ \_/ \_/ \_/ \_/ \_/ \_/ \_/ \_/ \_/ \_/ \_/ \_/
//
//--------------------------------------------------------------
//eAthena Map-Server Configuration File
//--------------------------------------------------------------
//--------------------------------------------------------------
// Configuration Info
//--------------------------------------------------------------
// Interserver communication passwords, set in account.txt (or equiv.)
userid: s1
passwd: p1
// Character Server IP
char_ip: 127.0.0.1
// Character Server Port
char_port: 6121
// Map Server IP
map_ip: 124.192.168.1.102
// Map Server Port
map_port: 5121
// Database autosave time, in seconds.
autosave_time: 60
// Message of the day file, when a character logs on, this message is displayed.
motd_txt: conf/motd.txt
// When @help or @h is typed when you are a gm, this is displayed for helping new gms understand gm commands.
help_txt: conf/help.txt
mapreg_txt: save/mapreg.txt
Quote:
Originally Posted by ericbp100
Do you sure the sclientinfo that you send to ur friends is WAN IP or NO-IP?
Or try to tell us about ur sclientinfo. And make sure the IP you set in athena server file is correct.
thats what i`m telling phakorn214 to him
In wich form i must set the IPs in the files? wich uses Wan and Wich uses local ip?
aww man you didnt read my text above shesh
who can post a good exp table hire so i could copy it at least up to lvl 1000
you got some prob hire, ericbp100 didnt saw the arangement on page 17.Quote:
Do you sure the sclientinfo that you send to ur friends is WAN IP or NO-IP?
Or try to tell us about ur sclientinfo. And make sure the IP you set in athena server file is correct.
Ok, I used the arrangement of page 17, set the sclientinfo ip to my wan (the one that ipchicken gives me right?) but now, I cant acces the server, my friends neither, if I change all the ips to the server's local IP. I can acces the server (cause I'm im the same router as the server), but my friends cant!
any suggest now? should I use No-Ip? cause my internet connection is: Router -> Hub -> W-Router -> Server and My computer
mmkay i figured out how to edit the max lvl to 999, but i dont know which folder to tinker with in order to change the max stats to 999 as well. could anyone be so kind as to point me in the right direction :) ty
try this 1 ericbp100
~~~char blabla~~~
// Login Server IP
login_ip: your ip hire
// Login Server Port
login_port: 6900
// Character Server IP
char_ip: your ip hire
// Character Server Port
char_port: 6121
~~~map blabla~~~
// Character Server IP
char_ip: 127.0.0.1
// Character Server Port
char_port: 6121
// Map Server IP
map_ip: 127.0.0.1
// Map Server Port
map_port: 5121
~~~login blabla~~~
// put here the LAN IP of your char-server
lan_char_ip: your IP hire
// put here the LAN IP of your map-server
lan_map_ip: your ip hire
// put here the Subnet mask of your LAN
subnet: your ip hire
subnetmask: 255.255.255.0
try this 1 ericbp100
Quote:
~~~char blabla~~~
// Login Server IP
login_ip: your ip hire
// Login Server Port
login_port: 6900
// Character Server IP
char_ip: your ip hire
// Character Server Port
char_port: 6121
Quote:
~~~map blabla~~~
// Character Server IP
char_ip: 127.0.0.1
// Character Server Port
char_port: 6121
// Map Server IP
map_ip: 127.0.0.1
// Map Server Port
map_port: 5121
[/QUOTE]Quote:
~~~login blabla~~~
// put here the LAN IP of your char-server
lan_char_ip: your IP hire
// put here the LAN IP of your map-server
lan_map_ip: your ip hire
// put here the Subnet mask of your LAN
subnet: your ip hire
subnetmask: 255.255.255.0
now my error is my map_sever is kip crashing and rebooting then crashing again
When i open all the server thingie it fine. But when i on the map-server file, it loaded up but it stuck in attempt to connect to char-server.(comp still running fine.)
Thats mean the ip you setting is wrong.Quote:
Originally Posted by don456
Shows us the picture pleaseQuote:
Originally Posted by KITSUMI
if you have more than one lan/wan card dissable the onl your not useing and the server will work
I have problems with the
sry but i fixed it yay, and 1 more question how can i put the BMP hire?,i got something nice heh.
aww sis dont know how to post sob me nither
i cant realy post a BMP sob
why cant i hyperlink it to my "my document"
:scratch: :bad: :vegeta: :native: :smurf: :construct :smilie_xp :sq_yellow :busted_co :winky: :2gunsfiring_v1: :technolog :jester: :flag_schw :eek: :eek6: :juggle: :poster_ss
hes still 11 years old
HEHEHEHHEHEHEHEHEHEHE I`m just testing the emotions!!^_^
see he acts 1
sry for another post i was testing to hyperlink
Ummm...How Put A Image On the Message?I thing I`m Gonna Blow Up:blowup: beacause of thinking how to put image Please Tell me:bounce8:
sry sry i cant stop my self for testing
why dont you guys help me?
Hello. I am asking for your help. I downloaded and set up EAthena just like it was shown at the first post. But I seem to have a problem when I login.. I can't login. I created a normal account and then turned it into a GM account but when i login, it says, Username or password incorrect, Please try again. I did. I double checked both the username and password and nothing. i even tried putting 0000 as the username and pass, but the same problem keeps on appearing. Please help me Im not sure what I can do.
Anyone Still have the problem for Login Server connecting to Char Server? I got my Login Server to connect but my map sercver won't connect to my Login.
Help!!!Can someone tell me how to check local IP and WAN IP or NO IP. Is there differences between local IP and WAN IP?
i keep having the "gravity error' when i press the hexed file 2 run it,pls hlp me..thanks
Nice Guide My server rund perfectly ^_^
Nice Guide My server runs perfectly ^_^
How to check LAN IP?How to check WAN IP?I run CMD>ipconfig.Then it appear something like this:
Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 202.188.155.218
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . : 202.188.155.218
So,which one is the LAN IP or WAN IP?
Can someone help me?
Is it possible to play it offline?
nevermind. ignore me
what is binkw32.dll? That is the error goes out when i run the hexedRO.
Can you help i cant get it to run... when i login it keeps saying Failed to connect to server.. what do i need to do?
Hi guys i have a problem with my Map and Char server pls help errors are those:
My Char server say that:
Map-server 0 has disconnected.
set eof : connection #5
And Map-Server say that:
NPC_Event:[OnAgitInit] do (0) events (Agit Initialize)
I make RO server for first time pls if some one can help me just post the answer of this errors pls:frusty:
nice guide!!thx!!
got another problem , i think it is the Fire wall but..
when i run the server and try do
acountname_M
password
it load little then it say
Unbale Connect The Server.
or
Fail To Connect The Server.
maybe Turn Fire Wall Off?
My char server just keeps repeating saving all files...
Anyone else have this problem and a solution?
GRRR, i think my problem might have been solved in one of the 20 pages of post but i cant read that much >_>. i ad a problem and couldnt think so :drinks_no ugh, and i got so pissed ~sigh~ i need a bit of help and i require personal attention :partytime Can someone a bit smarter then the average gamer email me?
stormjutsu@aol.com
I have read through some of the pages and couldnt find an answer. I created RO server but when I try to create account 1st time with _M I get disconnected from server message. Can someone please help?
LOL..the 1st page is help you oredi...read carefully u must can done it.Quote:
Originally Posted by Darkdrium
thx the guided..now my server is running thx againe^^.
I dont know anything about computer and i did everything the first page said but its not working. im getting an error like binkw32.dll and where do i put the kRO and sakray after i finish downloading it? and im trying this on my computer that doesnt have internet is that the problem? if anyone knows anything or fix this server before please email me or show me another link guide? my email is kevin_lor86@hotmail.com thx
o yea and i forgot to say that i dont have the iRO or Sakray you guys were talking about and if anyone dont mind please give me a link
i have made every thing proper my server has its own equips maps and moreeeeeee i can also login to it whitout any erros
but
when my frnds try to login they can login till login server but they cannot go to char server it say fail to connect to server what should i do plzzzzzzzzz help
Hmm i got the same problem with trikx wat should i do??
some one plz help me guys plz
Hey can someone help im geting eror #4 for the map file how can i fix it thanks for the help ^_^Quote:
Originally Posted by tsompanis
Can someone please tell me how to add and edit npc's ?
I've gotten everything set up 'n all, but it seems that
"Char-server can't connect to login-server <connection #4>." keeps popping up in the Character Server Window, and
"Map-server can't connect to char-server <connection #7>." keeps popping up in the Map Server Window.
Any ideas on how to fix it?? Help would be very much appreciated ^^
Thanks.
I did wat the instructions told me on the gm_account file but when i log into the game nothing changed and the commands arent working. any ideas? Also how can i change it so everything displays in english. thanks
Quote:
Originally Posted by Bubbaknoxz
Can you put the account txt in here ?
i fixed the gm acct it now works perfectly just need to find something that can translate everything from korean to english text. Then i have to figure out how to put the npc's in the game and see if neone has a dual rebirth job npc script
Quote:
Originally Posted by tsompanis
HELP ME PLESE HELP I GET TO CHAR LOG IN AND IT SAYS CHAR SERVER CANT CONECT TO LOGIN SERVER (CONECTION 4) WHAT DO I DO THANKS FOR THE HELP:crash: :ranting2: :2gunsfiring_v1: :nopity: :furious: :boxing_smiley: :2up: thats what im saying to my computer lol