Repost from china forum: Ver 133 DN Server using Vmware 9. 4G RAM available

[tntww]

You need at least 4G RAM to start this server
also your CPU must be 4 core (Intel i3） or higher


Ver 133 client (chinese):

You must be registered to see links

Client patch :

You must be registered to see links

v133 Server (using vmware):

You must be registered to see links

in the database ,there are four test accounts.
Account Password
2 2
3 3
4 4
5 5

1. Install vmware9 and the Client then patch it
2.Set your local network ip 192.168.1.3
3.Create a new vmware mechine ,Network:Bridge
Ram: If you have only 4G ram ,then the vmware physical ram should be 2GB,and you need to set the system inside vmware virtual ram at least 6GB
If you have 8G ram, then vmware physical ram shoule be 4GB ,and virtual ram 4GB
UNzip the Server ,and chose use exist virtual disk file to build the vmware system
click 01 02 03 to start the server
Account Create and Change job tool:

You must be registered to see links

In this client,all the accounts have GM right
Attention: You can go to SaintHaven ,but don't go to the town( level 9 -23) (I don't know its english name)
Don't use pet Don't create academician
Click the bat file to start the client
some GM command
/setlevel 100 Set your character level to 100
/go 11 go to SaintHaven
/makeitem SubjectID Amount EnhancedLevel 附魔 后缀
/makeitem ID 1 15 5 5
/makecoin 200000000 add 20000 gold
GMSubject：
/makeitem 78 GMblade
/makeitem 83 GMbow
/makeitem 84 GMbook
/makeitem 85 GMwand
/makeitem 177002 GM MagicAttack Ring
/makeitem 177001 GM Attack Ring
时装憤怒首饰套（Physical attack）
/makeitem 1073743737 項鏈
/makeitem 1073743742 耳環
/makeitem 1073743745 戒指

时装神秘首饰套（Magic Attack）
/makeitem 1073743746 戒指
/makeitem 1073743743 耳環
/makeitem 1073743741 項鏈
/makeitem 1073743747 光之精灵翅膀 wing
/makeitem 1073743748 光之精灵纹身 tattoo
/makeitem 1073743749 光之精灵

/makeitem 1073741991 黑暗梦魇精灵
/makeitem 1073741990 黑暗铭文纹身tattoo
/makeitem 1073742339 黑暗龙翅膀wing
/makeitem 1073743750 黑暗龙尾巴tail
/makeitem 536871426

/makeitem 268437300 1 0 0 18 最高级 健康的 强化纹章
/makeitem 268437312 1 0 0 18 最高级 魔力的 强化纹章
/makeitem 268437315 1 0 0 18 最高级 帐幕的 强化纹章
/makeitem 268437318 1 0 0 18 最高级 破坏的 强化纹章
/makeitem 268437321 1 0 0 18 最高级 铁壁的 强化纹章
/makeitem 268437324 1 0 0 18 最高级 疾风的 强化纹章
/makeitem 268437333 1 0 0 18 最高级 智慧的 强化纹章
/makeitem 268437336 1 0 0 4 最高级 最终的 强化纹章
/makeitem 268437339 1 0 0 18 最高级 致命的 强化纹章
/makeitem 268437345 1 0 0 18 最高级 巨熊的 强化纹章
/makeitem 268437348 1 0 0 18 最高级 生命的 强化纹章
/makeitem 268437309 1 0 0 18 最高级 韧性的 强化纹章
/makeitem 268437351 1 0 0 18 最高级 法力的 强化纹章
/makeitem 268437354 1 0 0 18 最高级 生机的 强化纹章
/makeitem 268437303 1 0 0 18 最高级 拘束的 强化纹章
/makeitem 268437306 1 0 0 18 最高级 不屈的 强化纹章
/makeitem 268437327 1 0 0 18 最高级 冲击的 强化纹章
/makeitem 268437330 1 0 0 18 最高级 意志的 强化纹章
/makeitem 268437342 1 0 0 18 最高级 幸运的 强化纹章
/makeitem 415633001 1000最终

/go 14071 4 海龙 Seadragon
/go 14077 4 海龙（硬盒硬盒模式）Seadragon hard core
/go 14081 4 绿龙 Greendragon
/go 14090 4 绿龙（硬盒硬盒模式）Greendragon hard core

/go 14051 4 大主教（地狱模式）
/go 14041 4 大主教
/go 14021 4 狮蝎巢穴（地狱模式）
/go 14011 4 狮蝎巢穴
/makeitem 1107412992 钻石蛋
/makeitem 1107374080 钻石爪子

60L

blade /makeitem 268436979 1 15 7
护手 /makeitem 268436973 1 15 7
Ring /makeitem 268440029 1 0 7 1

If you have any problem ,join in my QQ group 50265306 I can help you

 

[MrAngelusOne]

Re: Repost from china forum: Ver 133 Dragonnest Server using Vmware 9. 4G RAM availa

This client/server have the new UI , Desert Dragon and Kali?.

And where is the China forum?

 

[tntww]

Re: Repost from china forum: Ver 133 Dragonnest Server using Vmware 9. 4G RAM availa

This client/server have the new UI , Desert Dragon and Kali?.

And where is the China forum?

Not yet

You must be registered to see links

This client/server have the new UI , Desert Dragon and Kali?.

And where is the China forum?

Not yet
http://www.iopq.com/thread-16989599-1-1.html

 

[kennethz008]

Re: Repost from china forum: Ver 133 Dragonnest Server using Vmware 9. 4G RAM availa

Not yet

You must be registered to see links

May i know on how to use


Not yet

You must be registered to see links

May i know on how to use this? "Account Create and Change job tool:http://pan.baidu.com/s/1gdkiXDT"

is there anyone can compressed all the files and upload it to mega?.

 

[MrAngelusOne]

Re: Repost from china forum: Ver 133 Dragonnest Server using Vmware 9. 4G RAM availa

Not yet

You must be registered to see links

Not yet

You must be registered to see links

Oh ok , and cash shop is working?.

And you can upload the files on MEGA? because chinese servers are soo slow.

 

[NanayaQ]

Re: Repost from china forum: Ver 133 Dragonnest Server using Vmware 9. 4G RAM availa

anyone test it out yet?

 

[johnnyla]

Re: Repost from china forum: Ver 133 Dragonnest Server using Vmware 9. 4G RAM availa

Whenever I click on a xunlei link, it redirects me to kankan.. So I can't download

 

[adastmin]

Re: Repost from china forum: Ver 133 Dragonnest Server using Vmware 9. 4G RAM availa

english path need password

You must be registered to see links

 

[Abry]

Re: Repost from china forum: Ver 133 Dragonnest Server using Vmware 9. 4G RAM availa

Nothing so special I think.

 

[kennethz008]

Re: Repost from china forum: Ver 133 Dragonnest Server using Vmware 9. 4G RAM availa

Nothing so special I think.

Base on the screenshots provided in the original thread link, you can enter some of the level 50 dungeons i guess by command, since in the note above you cant go in other village but sh works, or both sh and portal works when going nest.

Note: im still downloading the 6 parts, well when you're almost done downloading 1 part it suddenly stop. -_- im using IDM btw

 

[cindylim]

Re: Repost from china forum: Ver 133 Dragonnest Server using Vmware 9. 4G RAM availa

english path need password

You must be registered to see links

what is the password?

 

[Abry]

Re: Repost from china forum: Ver 133 Dragonnest Server using Vmware 9. 4G RAM availa

Base on the screenshots provided in the original thread link, you can enter some of the level 50 dungeons i guess by command, since in the note above you cant go in other village but sh works, or both sh and portal works when going nest.

Note: im still downloading the 6 parts, well when you're almost done downloading 1 part it suddenly stop. -_- im using IDM btw

Isn't that 6 part download just a win2003 setup? I think you can skip that and the vmware installation.

I guess the only things that are different here are the v133 client and the server files with modified GameRes that matches with the client.

 

[veenzaa]

Re: Repost from china forum: Ver 133 Dragonnest Server using Vmware 9. 4G RAM availa

how about just download that client and unpack client Res to server res

 

[Abry]

Re: Repost from china forum: Ver 133 Dragonnest Server using Vmware 9. 4G RAM availa

I get it now so the 6 part download already has the server files in it, and everything is set up. Good for testing.

 

[kennethz008]

Re: Repost from china forum: Ver 133 Dragonnest Server using Vmware 9. 4G RAM availa

I get it now so the 6 part download already has the server files in it, and everything is set up. Good for testing.

Yeah thats the reason im downloading patiently the 6parts and its really pain in the assassin. Im 4 parts away. Its really slow download

 

[megingjard]

Re: Repost from china forum: Ver 133 Dragonnest Server using Vmware 9. 4G RAM availa

i drop item academician .. it already have in server+client.. only problem id class.. that ID is 49

 

[xX_ErOtIc_Xx]

Re: Repost from china forum: Ver 133 Dragonnest Server using Vmware 9. 4G RAM availa

OK Work Fine
Thanks For Share

 

[teomikey]

Re: Repost from china forum: Ver 133 Dragonnest Server using Vmware 9. 4G RAM availa

any1 knows why im getting a GPK error ???

 

[adastmin]

Re: Repost from china forum: Ver 133 Dragonnest Server using Vmware 9. 4G RAM availa

Server files in http://forum.ragezone.com/f853/release-tutorial-dragonnest-server-979993/

 

[megingjard]

Re: Repost from china forum: Ver 133 Dragonnest Server using Vmware 9. 4G RAM availa

master adastmin .. i already work in 2 week maybe .. just want to change version..can you tell me how to do? i already try hexworkshop 64bit also cant find that version 1.205.0 please help