[HELP]Port's to unclock !

[megingjard]

this just complicated function . please read this back.

if you have router that is good ideal.
goto canyouseeme.org copy ip.
example : 80.90.100.200

go to you router change you gateway lan - ip to : 80.90.100.1
after that on pc server give ip 80.90.100.200 and gateway for 90.90.100.1
after that..
DMZ ip 80.90.100.200 - this for port . dmz function is open all port on pc server . so no need to port forword anymore.


DO NOT MAKE MORE THAN 1 ADAPTER IN PC SERVER . ONLY 1 ADAPTER 1 IP
make sure that pc server have a internet after change all in to this.

every time router restart the ip will change you need to repeat again for get it working

[bandit575]

this just complicated function . please read this back.

if you have router that is good ideal.
goto canyouseeme.org copy ip.
example : 80.90.100.200

go to you router change you gateway lan - ip to : 80.90.100.1
after that on pc server give ip 80.90.100.200 and gateway for 90.90.100.1
after that..
DMZ ip 80.90.100.200 - this for port . dmz function is open all port on pc server . so no need to port forword anymore.


DO NOT MAKE MORE THAN 1 ADAPTER IN PC SERVER . ONLY 1 ADAPTER 1 IP
make sure that pc server have a internet after change all in to this.

every time router restart the ip will change you need to repeat again for get it working

i thinks that solution only work for single pc with connect modem without router board like mikrotik or cisco

[ikanbakar4]

i thinks that solution only work for single pc with connect modem without router board like mikrotik or cisco

did you already open port ?
maybe firewall on your mikrotik ?
because simply setting up for LAN or WAN
Your IP <- open for public
and your server will able to being access by your friend

maybe you can try telnet dn port from your pc when server are online
if default :
14400 , 15100 etc
and make sure on config folder (server) , serverstruct.xml
the port are match.

[bandit575]

did you already open port ?
maybe firewall on your mikrotik ?
because simply setting up for LAN or WAN
Your IP <- open for public
and your server will able to being access by your friend

maybe you can try telnet dn port from your pc when server are online
if default :
14400 , 15100 etc
and make sure on config folder (server) , serverstruct.xml
the port are match.

The Proble it's when access server from world wide service.
When i using LAN or Hamachi, it's no problem

Translate :
Masalahnya mas, saat setting langsung Internet .
kalau via LAN dan hamachi server dan client bisa jalan .


frustrated using NAT, now i'm using VpN, more easy configure
-

[Mauii]

im having problem with my client, my server side working just fine:


but this is the error when i launch the client:


It would be a big help if someone here can come up with a solution

[Antok Prastyo]

you can use virtual LAN and you give IP address public you ISP,this method work without hamachi or any vpn :)

- - - Updated - - -

maybe this client not detect file system

im having problem with my client, my server side working just fine:


but this is the error when i launch the client:


It would be a big help if someone here can come up with a solution

[Mauii]

you can use virtual LAN and you give IP address public you ISP,this method work without hamachi or any vpn :)

- - - Updated - - -

maybe this client not detect file system

okay ill try your suggestion, I hope it works this time. thank you

ill let you know if it works.