Genshin 3.2 VM

Quote:

Originally Posted by Mikesom

Spiral Abyss is not open or started after reaching adventure level 20 is there a gm command for this?

On server side,go to genshin/srv/data/txt/ and look for TowerScheduleData.txt
Look for start and end time. Change them. Like one from 01.11.2022 change to 01.12.2022 and etc. Change next too. They should never crosses in time or you get error.
Its also possible add next without editing date,but for this you need to edit other files, like tower reward,floor data composition and some others.
You can make it work easy way just by changing dates for existing ones.

- - - Updated - - -

Quote:

Originally Posted by Bultotrez

Yes, that's right, I started the client right after the server. But now the server vm freezes when trying to connect
http://puu.sh/Juza1/95a020f8b3.png

CPU stuck. Maybe you don't have enough cpu power for it to run correctly. Anyway you need to wait server to load first as it takes some time to load.

- - - Updated - - -

Quote:

Originally Posted by xxdolcexx

is tis orginal leak ore its emu ?

Its retail server files from QA.

- - - Updated - - -

Quote:

Originally Posted by TieLay

When start server in log see this errors:

Code:

xx:xx:xx,xxx |-ERROR in ch.qos.logback.core.joran.action.AppenderRefAction - Could not find an appender named [SERVEREVENT]. Did you define it below instead of above in the configuration file? xx:xx:xx,xxx |-ERROR in ch.qos.logback.core.joran.action.AppenderRefAction - See http://logback.qos.ch/codes.html#appender_order for more details.

and

Code:

xx:xx:xx <ERROR:DataLoader> We were unable to locate your default data files. xx:xx:xx <ERROR:Crypto> An error occurred while loading keys. java.lang.NullPointerException: null at java.base/java.util.Objects.requireNonNull(Objects.java:208) at emu.grasscutter.utils.Crypto.loadKeys(Crypto.java:43) at emu.grasscutter.Grasscutter.main(Grasscutter.java:81)

Is this normal? And how fix it?

- - - Updated - - -

Restarting server nothing change

Don't sure about 1 part(but probably nothing important),for 2 part its totally fine.

Quote:

Originally Posted by Biomanable

CPU stuck. Maybe you don't have enough cpu power for it to run correctly. Anyway you need to wait server to load first as it takes some time to load.

I waited about 25 minutes but got a cpu error while the client was connecting to the server (the client gave a connection error). I have an Intel i5-9600K, I don't think it's that weak

http://46.3.80.248/packet.tar.zstd failed: network is unreachable

thx @Biomanable its work now!

I change it to

1 1001,1002,1003,1004,1005,1006,1007,1008 1009,1010,1011,1012 2020-01-01 00:00:00 2030-12-31 03:59:59 1 1050

for test

me sad

Instruction on 1st post not full...
About my problem:
- server starts with no matter erros
- me unpack clent, add cultivation and launch it so me publish it's log:

Code:

Wrote certificate to %USERPROFILE%\AppData\Roaming\cultivation\ca\cert.crt Wrote private key to %USERPROFILE%\AppData\Roaming\cultivation\ca\private.key Installed certificate. Failed to get bg file response: missing field `bg_file` at line 1 column 325503 ^ please stop reporting this as an error it's so annoying LMFAO Root "Trusted root Centers sertifications" Sing corresponds to the public key Cert "Cultivation" added to the repository. CertUtil: -addstore — the command was executed successfully. Failed to open file: The specified file cannot be found. (os error 2) Failed to get bg file response: missing field `bg_file` at line 1 column 325503 ^ please stop reporting this as an error it's so annoying LMFAO Failed to open file: The specified file cannot be found. (os error 2) Starting process watcher... Connecting to proxy... Connected to the proxy. Error getting registry setting: Provided path not found: "Software\\miHoYo\\Genshin Impact" Game closed Disconnecting from proxy... Disconnected from proxy. Starting process watcher... Connecting to proxy... Connected to the proxy.

And client stuck in white screen after me open the door...

As i seen in screenshot in 1st message - need grasscutter JAR-file, but in instruction no one word about it, and how fix it?
And where get it, and what JRE or JDK ver needed and how configured?

- - - Updated - - -

P.S. Me put mod UserAssembly.dll into client's folder

Quote:

Originally Posted by Bultotrez

I waited about 25 minutes but got a cpu error while the client was connecting to the server (the client gave a connection error). I have an Intel i5-9600K, I don't think it's that weak

Try to add more cpu cores for vm. If vm have enough cpu power its should not stuck for 20+ seconds.

- - - Updated - - -

Quote:

Originally Posted by TieLay

Instruction on 1st post not full...
About my problem:
- server starts with no matter erros
- me unpack clent, add cultivation and launch it so me publish it's log:

Code:

Wrote certificate to %USERPROFILE%\AppData\Roaming\cultivation\ca\cert.crt Wrote private key to %USERPROFILE%\AppData\Roaming\cultivation\ca\private.key Installed certificate. Failed to get bg file response: missing field `bg_file` at line 1 column 325503 ^ please stop reporting this as an error it's so annoying LMFAO Root "Trusted root Centers sertifications" Sing corresponds to the public key Cert "Cultivation" added to the repository. CertUtil: -addstore — the command was executed successfully. Failed to open file: The specified file cannot be found. (os error 2) Failed to get bg file response: missing field `bg_file` at line 1 column 325503 ^ please stop reporting this as an error it's so annoying LMFAO Failed to open file: The specified file cannot be found. (os error 2) Starting process watcher... Connecting to proxy... Connected to the proxy. Error getting registry setting: Provided path not found: "Software\\miHoYo\\Genshin Impact" Game closed Disconnecting from proxy... Disconnected from proxy. Starting process watcher... Connecting to proxy... Connected to the proxy.

And client stuck in white screen after me open the door...

As i seen in screenshot in 1st message - need grasscutter JAR-file, but in instruction no one word about it, and how fix it?
And where get it, and what JRE or JDK ver needed and how configured?

- - - Updated - - -

P.S. Me put mod UserAssembly.dll into client's folder

Just time how much time its loading before it gives error. If you get time out in like 30 seconds,its mean you redis cache is full,so its can't add needed data. For fix this you either need to clear redis cache or add more ram to vm.
If its loading for a long time (at least 1 minute or more) and only then give error,its most likely you server isn't loaded yet(just wait for it too load) or gameserver just crashed. You can check it with "sudo cli status"

Quote:

Originally Posted by Biomanable

Try to add more cpu cores for vm. If vm have enough cpu power its should not stuck for 20+ seconds.

My processor only has 6 cores at 3.70Ghz. This is not enough?

Quote:

Originally Posted by Biomanable

Just time how much time its loading before it gives error. If you get time out in like 30 seconds,its mean you redis cache is full,so its can't add needed data. For fix this you either need to clear redis cache or add more ram to vm.
If its loading for a long time (at least 1 minute or more) and only then give error,its most likely you server isn't loaded yet(just wait for it too load) or gameserver just crashed. You can check it with "sudo cli status"

Waste time - till me close client
RAM - 16Gb and server and client of different PCs
cli status - how enter if server's console in "Dispatch>" mode and waits, or me need open new tty session?

log - more data

Code:

2022-12-20T10:43:48Z <ERROR:emu.grasscutter.data.DataLoader> We were unable to locate your default data files. 2022-12-20T10:43:49Z <ERROR:emu.grasscutter.utils.Crypto> An error occurred while loading keys. java.lang.NullPointerException: null at java.base/java.util.Objects.requireNonNull(Objects.java:208) at emu.grasscutter.utils.Crypto.loadKeys(Crypto.java:43) at emu.grasscutter.Grasscutter.main(Grasscutter.java:81) 2022-12-20T10:43:49Z <INFO:emu.grasscutter.Grasscutter> 正在启动 Grasscutter... 2022-12-20T10:43:49Z <INFO:emu.grasscutter.Grasscutter> 游戏版本：3.2.0 2022-12-20T10:43:49Z <INFO:emu.grasscutter.Grasscutter> Grasscutter 版本：1.0.0-dev-6cd3c228 2022-12-20T10:43:52Z <INFO:emu.grasscutter.server.http.HttpServer> [Dispatch] Dispatch 服务器启动于 .[1m.[33m172.16.200.121:2888.[0m 2022-12-20T10:43:52Z <INFO:emu.grasscutter.Grasscutter> 加载完成！输入 "help" 查看命令列表 2022-12-20T10:44:45Z <INFO:emu.grasscutter.Grasscutter> Press Ctrl-C again to shutdown. 2022-12-20T10:48:54Z <INFO:emu.grasscutter.Grasscutter> Press Ctrl-C again to shutdown. 2022-12-20T10:49:41Z <ERROR:emu.grasscutter.data.DataLoader> We were unable to locate your default data files. 2022-12-20T10:49:42Z <ERROR:emu.grasscutter.utils.Crypto> An error occurred while loading keys. java.lang.NullPointerException: null at java.base/java.util.Objects.requireNonNull(Objects.java:208) at emu.grasscutter.utils.Crypto.loadKeys(Crypto.java:43) at emu.grasscutter.Grasscutter.main(Grasscutter.java:81) 2022-12-20T10:49:42Z <INFO:emu.grasscutter.Grasscutter> 正在启动 Grasscutter... 2022-12-20T10:49:42Z <INFO:emu.grasscutter.Grasscutter> 游戏版本：3.2.0 2022-12-20T10:49:42Z <INFO:emu.grasscutter.Grasscutter> Grasscutter 版本：1.0.0-dev-6cd3c228 2022-12-20T10:49:42Z <INFO:emu.grasscutter.server.http.HttpServer> [Dispatch] Dispatch 服务器启动于 .[1m.[33m172.16.200.121:2888.[0m 2022-12-20T10:49:42Z <INFO:emu.grasscutter.Grasscutter> 加载完成！输入 "help" 查看命令列表 2022-12-20T11:10:12Z <INFO:emu.grasscutter.server.http.dispatch.RegionHandler> [Dispatch] Client 172.16.xxx.xxx request: query_region_list 2022-12-20T11:10:26Z <INFO:emu.grasscutter.auth.DefaultAuthenticators$PasswordAuthenticator> [Dispatch] 客户端 172.16.xxx.xxx 已登录，UID 为 10002 2022-12-20T11:10:26Z <INFO:emu.grasscutter.server.http.dispatch.DispatchHandler> [Dispatch] 客户端 172.16.xx.xxx 正在尝试登录 2022-12-20T11:10:26Z <INFO:emu.grasscutter.auth.DefaultAuthenticators$SessionKeyAuthenticator> [Dispatch] 客户端 172.16.xx.xxx 成功交换 token 2022-12-20T11:10:26Z <INFO:emu.grasscutter.server.http.dispatch.DispatchHandler> [Dispatch] 客户端 172.16.xx.xxx 正在尝试登录 2022-12-20T12:15:00Z <INFO:emu.grasscutter.Grasscutter> Press Ctrl-C again to shutdown.

So as me seen client can login but can't income

- - - Updated - - -

so top shows:

Code:

top - 12:40:52 up 22:04, 2 users, load average: 2.17, 1.54, 0.83 Tasks: 241 total, 1 running, 240 sleeping, 0 stopped, 0 zombie %Cpu(s): 7.1 us, 5.2 sy, 0.0 ni, 87.8 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 16009.3 total, 353.0 free, 9842.8 used, 5813.4 buff/cache MiB Swap: 4096.0 total, 4056.1 free, 39.9 used. 5827.2 avail Mem PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 39438 root 20 0 20.0t 3.5g 573708 S 15.3 22.3 3:25.85 gameser+ 39432 root 20 0 20.0t 1.0g 356000 S 9.7 6.4 0:29.17 gateser+ 39434 root 20 0 20.0t 919452 352304 S 9.0 5.6 0:27.52 dbgate 39430 root 20 0 20.0t 1.1g 139380 S 8.7 6.8 0:27.96 nodeser+ 39440 root 20 0 20.0t 3.3g 420432 S 8.7 21.1 3:11.68 muipser+ 39436 root 20 0 20.0t 1.3g 351128 S 7.3 8.5 0:22.64 dispatch 503 root 19 -1 142308 31164 30048 S 0.3 0.2 0:25.90 systemd+ 697 root rt 0 347916 18984 9020 S 0.3 0.1 0:46.36 multipa+ 1282 systemd+ 20 0 2611664 98344 36924 S 0.3 0.6 8:48.88 mongod 39688 root 20 0 9380 3988 3224 R 0.3 0.0 0:00.55 top 1 root 20 0 169404 11128 6716 S 0.0 0.1 0:03.78 systemd 2 root 20 0 0 0 0 S 0.0 0.0 0:00.02 kthreadd 3 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 rcu_gp 4 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 rcu_par+ 6 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 kworker+ 8 root 0 -20 0 0 0 I 0.0 0.0 0:01.85 kworker+ 9 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 mm_perc+

- - - Updated - - -

So as me seen 1st start - will filed coz not all data implement into client an user's profile...

So it's work, but strange - looks like an emu or developer's mode

_secret_token_ is what?

Quote:

Originally Posted by Bultotrez

My processor only has 6 cores at 3.70Ghz. This is not enough?

You need at least 6 cores set for vm. Notice - its not actually mean its use all 6 cores your have. Vm don't have separate checks for threads,so if you cpu 6 6/12 and you set 2 cpu on vm,its literally mean you only set 1 full core,which is not enough. Just set at least 6 cores and try.

- - - Updated - - -

Quote:

Originally Posted by TieLay

So as me seen client can login but can't income

So as me seen 1st start - will filed coz not all data implement into client an user's profile...

So it's work, but strange - looks like an emu or developer's mode

You also should check if firewall on vm is on. Without opened ports you also get white screen.

Quote:

Originally Posted by TieLay

Does exists way change binded IP address to my?
What the files needed edit. O enough find all files with 192.168.200.130 and replace it by my IP or exists some thin moments?

Me ask - me answer... So:
- select IP and remeber it
- launch VM
- login
- escalate access level
- edit base config "sudo nano /etc/netplan/00-installer-config.yaml" and write you's IP
- reboot or execute "sudo netplan --debug apply"
- after that U can connect trough SSH and work distantly
- for easiest way me install Midnight Commander and use Midnight Editor as base editor
- in MC start search files in "/" all files with pattern "192.168.200.130" and edit each other
- after that restart VM
It's all

winch ports do i need to open for running it on other pc can get it to work

I can't do multi-setting. No matter how I set it up, I can't connect.

https://ibb.co/Y7Byk68

help pls

Quote:

Originally Posted by xxdolcexx

winch ports do i need to open for running it on other pc can get it to work

sudo lsof -i -P -n | grep LISTEN

Quote:

matheos
https://ibb.co/Y7Byk68

help pls

disable firewall or open the right ports