Hide & Hold Out - H2o (Server)

[askmyleg]

You have to get the correct "manifest version", with the changes to the steamdb, you need to dig deeper into the "history" to get the correct one.

I enter Id From the dedicated server + id from the section and manifest but it still downloads the very latest

 

[aqualung]

Sorry, was not on since you posted, error -129 is wrong version, this is for v0.01.76b W1nd0ws Server:

download_depot 377610 377612 2753608707147609055


AquaLung



FYI - I ran both the server and client through SmartSteamEmu which seems to work on my low end work computer ( see pic above, only like 12 FPS ). But on my Game PC at home, Client seems to crash out alot of times just after loading up. Log states that steamworks is not running. Not sure if its because I actually have Steam installed on that computer or what ( even though it is not actively running, only SmartSteamEmu ). The Launcher may need modified or EAC removed if it causes issues.

 

[askmyleg]

Re: Hide & Hold Out - H2o (Server)

Sorry, was not on since you posted, this is for v0.01.76b W1nd0ws Server:

download_depot 377610 377612 2753608707147609055


AquaLung

I enter your line it downloads the latest server release. I don’t understand why this happens! :

Can we make it easier? will you just mirror the server version?

 

[aqualung]

Re: Hide & Hold Out - H2o (Server)

Are you running it in SteamCMD console logged in as anonymous?

AquaLung

*Not sure I can upload from work, but I can try....

 

[askmyleg]

Re: Hide & Hold Out - H2o (Server)

Are you running it in SteamCMD console logged in as anonymous?

AquaLung

*Not sure I can upload from work, but I can try....

No, I ran it through Powershell, but do I need Steamcmd?:blink:

 

[aqualung]

Re: Hide & Hold Out - H2o (Server)

No, I ran it through Powershell, but do I need Steamcmd?:blink:

Yes, must have!

LAUNCH SteamCMD
login anonymous
download_depot 377610 377612 2753608707147609055

*Note spaces there are 3 sets of numbers!

 

[askmyleg]

Re: Hide & Hold Out - H2o (Server)

i try :

 

[aqualung]

Re: Hide & Hold Out - H2o (Server)

That's it.

AquaLung

 

[DNC]

Re: Hide & Hold Out - H2o (Server)

Download depotdownloader ----> depotdownloader-2.3.1.zip

You must be registered to see links

Example command, using D:\ as the source disk drive for use

Make a folder for archive contents to be extracted to [B][COLOR="#FF0000"]D:\DD[/COLOR][/B]
Extract the depotdownloader-2.3.1.zip archive into the [B][COLOR="#FF0000"]D:\DD[/COLOR][/B] folder
Make a folder for server [B][COLOR="#FF0000"]D:\H2OServer[/COLOR][/B]
Run the following command in a[COLOR="#FF0000"] "command prompt" ([B]console not[/B][/COLOR] powershell window).
D:\DD\depotdownloader.bat  -app 377610 -depot 377612 -manifest 2753608707147609055 -dir "D:\H2OServer"

After command completion, you should see the following in the "console window":

Depot 377612 - Downloaded 756495440 bytes (1724666411 bytes uncompressed)
Total downloaded: 756495440 bytes (1724666411 bytes uncompressed) from 1 depots
[CMClient] Sent -> EMsg: ClientLogOff (Proto: True)
Disconnected from Steam

Hit the "enter key" on the keyboard to go back to the command prompt after you see the above "Disconnected from Steam" message.




After completing the download and starting the server H2O.exe at least 1 time.
You will then have the .cfg files.
Here is the output of the server config.cfg file after the download:

# Server Configuration File #

[B][COLOR="#FF0000"][SIZE=5]v0.01.76b[/SIZE][/COLOR][/B]

1761

name=Unnamed Server
port=8566
max_player=40
pvp_enabled=True
game_mode=1
daily_restart_hour_utc=01:00
time_between_saves=900
admin_password=admin
first_admin=YourSteamID
ping_limit=0
territory_size=40
rcon_port=8566
rcon_password=
# END #

askmyleg
Updated the post and it looks like it bumped to page 3

 

[aqualung]

@askmylegYour PM is full and not accepting messages...

 

[askmyleg]

@askmyleg

Your PM is full and not accepting messages...

This is the version I am using:

You must be registered to see links

Tell me your discord if you have one or can create a server for the future of this game?

 

[aqualung]

I don't use discord.

I could probably setup a server from home, may need to modify launcher to stop with the disconnects on load up of the client.

What message you getting in H2OClient_v0.1.0.76b\H2o_Data\output_log.txt for disconnect?

AquaLung


It seems that if I have another app already running via a SmartSteamEmu launcher then the Client loads without crashing. If the client is the only app launched through SSE then after load it exits with this message in the output_log.txt of client:

ERROR::Steam not initialized

(Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 37)

InvalidOperationException: Steamworks is not initialized.
at Steamworks.InteropHelp.TestIfAvailableClient () [0x00000] in <filename unknown>:0
at Steamworks.SteamUser.CancelAuthTicket (HAuthTicket hAuthTicket) [0x00000] in <filename unknown>:0
at NetworkController.OnApplicationQuit () [0x00000] in <filename unknown>:0

 

[aqualung]

nvm AquaLung

 

[whhacker93]

Re: Hide &amp;amp; Hold Out - H2o (Server)

I'll give this a shot and see what I get, thanks for this. I'll update with my progress.

It's built in unity..

Open it up with Jetbrains DOT PEEK or

You must be registered to see links

DNSpy find whatever you need in there.



I am getting Manifest is not available.



I will buy the game on steam since I want it too! I'll share the files afterwards

 

[askmyleg]

Re: Hide &amp;amp; Hold Out - H2o (Server)

I'll give this a shot and see what I get, thanks for this. I'll update with my progress.

It's built in unity..

Open it up with Jetbrains DOT PEEK or

You must be registered to see links

DNSpy find whatever you need in there.



I am getting Manifest is not available.



I will buy the game on steam since I want it too! I'll share the files afterwards

Have some news friend?