[CentOS] Setting up your Aura Kingdom Server

[elliv]

I'm having this error when trying to connect to navicat

@YumaNakamura the solution :
1. like in video disable iptables or
2. allow port 5432 in iptables

- - - Updated - - -

@Monthaga

here i upload the VirtualBox full linux.
user : root
password : adgjmptw31

user postgres : postgres
password : postgres

ip address : 192.168.100.99
mode : bridge

http://www.mediafire.com/file/3j8ta2u0yvftjpf/AuraKingdomServer.vdi

[Monthaga]

i got the same problem as yours, the problem was in folder : " ../WorldServer/WorldServer "
to solve it you need to use AKTools again, V1 or V2 up to you.
just make sure you got success on Patch with AKTools then copy it to your server

AKTools V1 ( you can single convert/patch )
1. Copy original file WorldServer from server file to folder " fix "
2. Open AKTools >> put your IP ex "192.168.100.99" >> Convert >> Hex Files
3. Wait until notification " WorldServer patched! "
4. Copy file " WorldServer " from fix to your server, (mine /root/hxsy/WorldServer/.. )
5. Start postgresql >> Start Server


AKTools V2 ( need 4 file to Patch )
0. Open AKTools , it will auto make folder " Backups, Fixed, Original "
1. Copy original file LoginServer, MissionServer, WorldServer, ZoneServer from server file to folder " Original "
2. Back to AKTools >> put your IP ex "192.168.100.99" >> Patch
3. Wait until notification " All 4 files were patched successfully! "
4. Copy file from Fixed folder your server respective folder, (mine /root/hxsy/.. )
5. Start postgresql >> Start Server

Elliv, I made a careful note in the procedure that you had previously informed me, I noticed that when using AKTools V2 and Eperty none of them shows a message that was successful in performing the procedure, maybe that could be the problem, AKTools V2 always error and So I use Eperty however it is as I said, both do not show messages that the process was successful.

- - - Updated - - -

In AKTools V2 this error always appears for all files.
https://prnt.sc/g1yfcs

[elliv]

have u copy 4 file : " LoginServer, MissionServer, WorldServer, ZoneServer "from server file to folder " Original " ?
it look like u didnt copy it.
btw did u have discord chat acccount ? it better for us to chat, when it success u can write here your step
my discord ID : #9058

[YumaNakamura]

Its fixed guys, i followed the vid tutorial thanks

[Monthaga]

Friends, I finally succeeded, was intense and challenging for me, but those who persist and do not give up in the face of difficulties are the true deserving of victory. Thanks to you Elliv, Kaelthas and everyone else in the forum, I was able to solve the problem that left me with my nails during those days when I was working on this project.Well, without further ado the problem was really to the way I was using the "AKTools", in the video I FOLLOWed the instructor copied the PASTAS "LoginServer, MissionServer, WorldServer, ZoneServer", this morning I occurred to make a try Which I had not even thought of before, instead of copying the PASTA, this time I copied what was inside them. I used AKTolls V2, I copied "LoginServer, MissionServer, WorldServer, ZoneServer" into the original folder in AKTools V2. After that I opened AKTools, I placed my IP and clicked on Patch, finally the message of success, it was at that time that I realized that I finally got it, moved the files from the Fixed folder back to the server, gave restart to postgresql and turned on the server. I opened the Client, I logged in, I created the CHARACTER and I'm playing!

- - - Updated - - -

https://prnt.sc/g25tcr
https://prnt.sc/g25teo

- - - Updated - - -

https://prnt.sc/g25teo

- - - Updated - - -

I would also like to contribute with the AuraKingdom community, I have re-done the tutorial in Brazilian Portuguese, I will soon publish it here along with video lesson.

[elliv]

hehehe... congratulation
u inspired me, look like i gonna made tutorial in Indonesian language too,

[padilha22]

@YumaNakamura the solution :
1. like in video disable iptables or
2. allow port 5432 in iptables

- - - Updated - - -

@Monthaga

here i upload the VirtualBox full linux.
user : root
password : adgjmptw31

user postgres : postgres
password : postgres

ip address : 192.168.100.99
mode : bridge

AuraKingdomServer

I use these files, but my network does not work. Not even the ifconfig command.

[Monthaga]

I am behind a GM command table and also a tutorial teaching how to use them, I would also like to be guided by how to edit the Level, put GM and Add Gold to the Characters,

[kbnnlan]

my server 1hous and it auto disconect
log :

ERROR!![MSSocketManager.cc,346],Bad file descriptorNetwork Error -1 25181,2017/08/02 12:31:23,[TCPNetworkService.cc:893],TCP <0x6357AD0:18>: FillBuffer: 127.0.0.1 recv 0 25182,2017/08/02 12:31:23,TCP <0x6357AD0:18>: Fill State = -1 25183,2017/08/02 12:31:23,Erase Socket 18 25184,2017/08/02 12:31:23,SOCKET 18: closed. 25185,2017/08/02 12:31:23,[EVENT] EventGatewayPaymentReconnect 25186,2017/08/02 12:31:23,ERROR!![MSSocketManager.cc,346],Bad file descriptorNetwork Error -1 25187,2017/08/02 12:31:23,[TCPNetworkService.cc:893],TCP <0x61DFE40:16>: FillBuffer: 127.0.0.1 recv 0 25188,2017/08/02 12:31:23,TCP <0x61DFE40:16>: Fill State = -1 25189,2017/08/02 12:31:23,[TCPNetworkService.cc:1100],Abort

sorry for my english

[mistree]

The truth is AK Tools v1 and v2 are not working properly.
The correct way to do it is to patch the 4 server files yourself.

You could use IDA to patch. locate these 2 functions

lapis::CMSTCPService::CMSTCPService(uint,int,lapis::CSessionManager *,ushort) .text 000000000063BDB0 000002AD 00000028 00000000 R . . . . T .
and

lapis::CMSTCPService::CMSTCPService(uint,int,lapis::CSessionManager *,ushort) .text 000000000063BAE0 000002AD 00000028 00000000 R . . . . T .

and hex your own ip here


I also tried to hex the version string in worldserver 3.0 to let the latest HK client connect.
However there's some errors when receiving the generated ticket. I believe if you use the HK 3.0 server files and hex patch all the db version check and client version check you can update to the latest version as official server.

[kbnnlan]

any release web for server plz?

[Monthaga]

I am behind a GM command table and also a tutorial teaching how to use them, I would also like to be guided by how to edit the Level, put GM and Add Gold to the Characters.

[prototype116]

what is wrong? message tells my its wrong.

[UseresU]

what is wrong? message tells my its wrong.

Just make sure that you have everything spelled correctly.
INSERT INTO tb_user (mid, password, pwd) VALUES ('test', 'test', '098f6bcd4621d373cade4e832627b4f6')

[prototype116]

Just make sure that you have everything spelled correctly.
INSERT INTO tb_user (mid, password, pwd) VALUES ('test', 'test', '098f6bcd4621d373cade4e832627b4f6')

i just pasted today same shit and it wroked lol :DDDD

- - - Updated - - -

this appear after i press start button
if i successes to start i will open the host to other ppls