Centos 5.4 Install with TDP 2.8 pack

[kazaxx]

Centos 5.4 Install with TDP 2.8 pack
why my WinScp dosent connect to centos?
i have turned off VMware Network Adapter VMnet8 and WMnet1
plz help

[MentaL]

[Daman2009]

I know its obvious. But check your firewall. And re-check your IP addresses that you have set up.
Make sure you are not trying to connect to windows IP instead of centos.

If that fails, try to ping the address using ping IP ADDRESS see what result you get from that.

Hope this helps you!

[chumpywumpy]

i have turned off VMware Network Adapter VMnet8 and WMnet1

You turned off the vmware network you are connecting to. Turrn both back on again as one of them is your vmware network. Then check if centos has an ip address by typing "ifconfig" in a terminal in the vmware window.

[kazaxx]

what i need a put Network connection:bridget,NAT,Custom (custom is on centos originally)

[Aka Gambit]

If you use a router, bridged, if your WAN IP is your LAN IP, then NAT.


If you download chumpy's guides here http://forum.ragezone.com/f460/old-m...abases-444970/

It tells you all the right settings to use.

[kazaxx]

thx men this is helped me!and thx you chumpy

[Aka Gambit]

No thanks needed, its all chumpy, I am just relaying information I got from his guide :)

[kazaxx]

:) i know chumpy is best :(Y)