Help, what i must to do..?!

[janis112]

Please say what i must to do to repair it..

[MentaL]

[schneemann101]

So far I know that aren't importen to fix this to Error's I have this two too nevertheless by me working all fine xP

[chumpywumpy]

You didn't follow the guide. You cannot give that address to centos, not one single guide says to give it a wan ip as you canot assign them your ISP does. You have used an IP address that is in use by somebody else.

Go back to the guide and do what it tells you to do. Leave centos network settings on auto (dhcp) and let vmware work out what the address should be as you obviously don't know enough to work out what addresses to use.

[janis112]

please lok in my other post, i hawe pictures there..? are you hawe Skype chump..?

---------- Post added at 06:52 PM ---------- Previous post was at 06:44 PM ----------

i do what you say i use automatic configure, but i can`t login in winSCIP with that ip what i can see in centos.. (:(

---------- Post added at 06:56 PM ---------- Previous post was at 06:52 PM ----------

Whit what adres i need to try ping..?!?! in other post i hawe my ip screen shoot

[mansen]

learn to read
and learn to use due Board search

and not just flaming

[janis112]

i try chumpys guides, but do`nt wor for me.., he has ip start with 192 but mine are 87.xxx.xxx.71 LOOL and may mask is not 255.255.255.0 but 255.255.255.128 (what i must write on centos configuration like in guide..? In guide showed with that simpy 192 adress, did i hawe to tahat adres..? :D

[janis112]

lok i set automatic DCPD and lok at screen... :( FAIL, my ip suck..!

and no ips or hostnames here.. :(

[schneemann101]

OMG a dripple post i think you don't can read the forum rules -.- ....
Hear of Mansen xP

EDIT: No IP or hostname is almost that you don't have a connection to the internet
use this command to test you connection "ping -c4 www.google.com" "ping -c4 (your router IP)"

[janis112]

LOL where can i see my LAN IP..? in ipconfil i can see my WAN ip starts with 87.

---------- Post added at 07:40 PM ---------- Previous post was at 07:37 PM ----------

omg a dripple post i think you don't can read the forum rules -.- ....
Hear of mansen xp

edit: No ip or hostname is almost that you don't have a connection to the internet
use this command to test you connection "ping -c4 www.google.com" "ping -c4 (your router ip)"

i don~t hawe rooter

[schneemann101]

Test this: Type in the Terminal "ping -c4 (your windows PC IP)"

I think you haven't any connection

[janis112]

yes i hawen,t but why...? i doo all what shown in guide.. :( but in guide say thand don`t need set auto ip.. :(

[schneemann101]

To each his own...
I have this do and by me all working fine...
Use the surch butten in advance...

[janis112]

(:( i`m sad.. :(

[schneemann101]

I advise you read the Guide's again again and again...

[janis112]

So i make, server is running, puty that say, but how can i conect..? i try to enter in internal.txt my pz IP and centos IP nothing...:( what ip i must to enter there..?

[allocen]

u are really lazy noob,i say u just search here in ragezone and u will find all u need,don`t be lazy

---------- Post added at 09:07 PM ---------- Previous post was at 09:04 PM ----------

someone,please close this topic!

[chumpywumpy]

i try chumpys guides, but do`nt wor for me.., he has ip start with 192 but mine are 87.xxx.xxx.71 LOOL and may mask is not 255.255.255.0 but 255.255.255.128 (what i must write on centos configuration like in guide..? In guide showed with that simpy 192 adress, did i hawe to tahat adres..? :D

Look you need to start reading the guides and stop expecting people to do everything for you. I don't use skype and even if i did i would certainly not spend my free time doing everything for you which is what you seem to expect.

Look at this topic.
http://forum.ragezone.com/f460/my-gu...ack-v2-444970/
See the vmware networking guide? That is the answer you claim you cannot find. It actually tells you how to find the right settings for your network and if you had bothered to read it you would know that the 87.x address is completely wrong and it should have a 192.x address like my guide.

So i make, server is running, puty that say, but how can i conect..? i try to enter in internal.txt my pz IP and centos IP nothing...:( what ip i must to enter there..?

You won't be able to connect until your networking is right. Stop guessing what you need to do and what order you have to do it in, follow the guides exactly. They have worked for everybody else here which tells me the guides are not the problem.

The guide does expect you to have at least a little networking knowledge (if you don't have this you shouldn't even be trying to set up a server in my opinion). As you clearly have non whatsoever i suggested auto (dhcp) settings so vmware will work it out for you. We don't know your network settings and therefore cannot tell you what to use, and since you can't even follow the guide that explains how to find these settings and work out the correct ones for your server auto (dhcp) is all we can offer you.

I stand by the statement in the guide. Some people are simply not qualified to run a server. Official hire pretty skilled people to run Cabal, it isn't something people with no knowledge and no common sense can run unless they are willing to put in a lot of time to learn the requirements.

[schneemann101]

WTF

learn to read
and learn to use due Board search

and not just flaming

Surch FTW

and pick up the post at the heart of mensen !!!!